• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.85-96
• /
• 2004

본 연구는 점토층위의 모래지반에 위치하는 표면기초의 극한지지력에 대해 이론적으로 조사하였다. 실용적인 적용을 위하여 표면기초의 지지력에 관한 연구들에 대한 검토와 논의가 제시되며, 한계해석(Limit Analysis)의 운동학적 접근방법을 이용하여 정해의 극한 지지력이 계산되었다. 운동학적 해는 상한값이며 해의 정확성은 파괴메카니즘의 형상에 달려 있다. 이러한 방법은 설계도표를 만드는데 편리할 뿐만 아니라 물성치의 영향을 추정할 수 있다. 본 연구에서는 범용 유한요소해석 프로그램인 ABAQUS를 사용하여 탄소성 이론에 근거하여 극한지지력을 계산하였다. 운동학적 방범으로 계산된 결과와 유한요소 해석, 한계평형론에 근거한 몇몇 알려진 식들(Yamaguchi, Meyerhof와 Okamura 등)에 의한 결과를 비교하였다. 아울러, 운동학적 방법에 의한 제안식과 유한요소해석 결과와 한계평형해석 결과의 유효성에 대하여 검증하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권1호
• /
• pp.13-23
• /
• 2002

This paper presents inverse kinematic and dynamic analyses of HexaSlide type six degree-of-freedom parallel manipulators. The HexaSlide type parallel manipulators (HSM) can be characterized as an architecture with constant link lengths that are attached to moving sliders on the ground and to a mobile platform. In the inverse kinematic analyses, the slider and link motion (position, velocity, and acceleration) is computed given the desired mobile platform motion. Based on the inverse kinematic analysis, in order to compute the required actuator forces given the desired platform motion, inverse dynamic equations of motion of a parallel manipulator is derived by the Newton-Euler approach. In this derivation, the joint friction as well as all link inertia are included. Relative importance of the link inertia and joint frictions on the computed torque is investigated by computer simulations. It is expected that the inverse kinematic and dynamic equations can be used in the computed torque control and model-based adaptive control strategies.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1023-1032
• /
• 1995

The multiple cooperating robot system plays an important role in the research of modern manufacturing system as the emphasis of production automation is more on the side of flexibility than before. While the kinematic and dynamic analysis of a single robot is performed as an open-loop chain, the dynamic formulation of robot in a multiple cooperating robot system differs from that of a single robot when the multiple cooperating robots form a closed kinematic chain holding an object simultaneously. The object may be any type from a rigid body to a multi-joint linkage. The mobility of the system depends on the kinematic configuration of the closed kinematic chain formed by robots and object, which also decides the number of independent input parameters. Since the mobility is not the same as the number of robot joints, proper constraint condition is sought. The constraints may be such that : the number of active robot joints is kept the same as mobility, all robot joints are active and have interrelations between each joint forces/torques, two robots have master-slave relation, or so on. The dynamic formulation of system is obtained. The formulation is based on recursive dual-number screw-calculus Newton-Eulerian approach which has been used for single robot analysis. This new scheme is recursive and compact symbolically and may facilitate the consideration of the object in real time.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권3호
• /
• pp.217-223
• /
• 2002

The paper presents a single constraint equation of the direct kinematic solution of 6-dof (Stewart-Gough) platforms. Many research works have presented a single polynomial of the direct kinematics for several 6-dof platforms. However, the formulation of the polynomial has potential problems such as complicated formulation procedures and discrimination of the actual solution from all roots. This results in heavy computational burden and time-consuming task. Thus, to overcome these problems, we use a new formulation approach, called the Tetrahedron Approach, to easily derive a single constraint equation, not a polynomial one, of the direct kinematics and use two well-known numerical iterative methods to find the solution of the single constraint equation. Their performance and characteristics are investigated through a series of simulation.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.40-50
• /
• 1996

An unified compliant control algorithm to regulate the force by dual arms is proposed, where tow arms are treated as one arm in a kinematic viewpoint. The force error calculated form the information of two force/torque sensors attached to the end of each arm is transferred to minimum actuator coordinates, and then is distributed to total system actuator coordinates. The position adjustment at the total actuator coordinates is computed based on the effective computed based on the effective compliance matrix with respect to total actuator coordinates, which is obtained by coordinate transformation between the task coordinates and the total actuator coordinates. An experiment is carried out for dual arms with asymmetric kinematic structure to control an interaction force between manipulators and the environment. The performances of the proposed control algorithm are experimentally compared to those of dual arms employing master/slave scheme. The proposed compliant control algorithm not only ouperforms other algorithms, but also can be treated as an unified approach n the sense that it can be applied to arbitrary dual arm systems with general kinematic structures.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.128-137
• /
• 1998

A numerical approach for performing kinematic design sensitivity analysis of vehicle suspension systems is presented. Compared with the conventional analytical methods, which require explicit derivation of sensitivity equations, the proposed numerical method can be applied to any type of suspension systems without obtaining sensitivity equations, once any kinematic analysis procedure is established. To obtain sensitivity equations, a numerical differentiation algorithm that uses the third order Lagrange polynomial is developed. The algorithm efficiently and accurately computes the sensitivity of various vehicle static design factors with respect to kinematic design variables. Through a suspension design problem, the validity and usefulness of the method is demonstrated.

• 척추신경추나의학회지
• /
• 제15권2호
• /
• pp.33-41
• /
• 2020

Objectives The purpose of this report was to study the circulation of meridian WiGi, YoungGi, from the viewpoint of manual medicine. Methods First, the Korean Medical approach analyzes documents about the circulation of meridian WiGi, YoungGi, and the biomechanical approach is to analyze documents about kinetic force and kinematic movement. The third inherent energy approach is to analyze documents about craniosacral rhythm and visceral motility. Finally, it is to study the correlation between the circulation of meridian WiGi, YoungGi, and the viewpoint of biomechanics force and movement, the inherent energy of manual medicine. Results Meridian WiGi is fast, powerful, and changeful. It circulates through the head and extremities in the daytime and visceral organs at night. The deviation pelvis and distorted thoracic cage create kinetic force and kinematic movement. Meridian YoungGi is very small and soft energy and circulates meridians and visceral organs permanently. Craniosacral rhythm and visceral motility radiate continuously from cranial and visceral organs to the whole body. Conclusions Circulation of meridian WiGi is closely related to the biomechanical approach. In addition, circulation of meridian YoungGi is closely related to the inherent energy approach.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.255-261
• /
• 2013

This paper presents prediction of ultimate longitudinal strength of a VLCC, "Energy Concentration" for which many benchmark studies have been carried out, based on kinematic displacement method proposed by Tayyar and Bayraktarkatal (2012). Kinematic displacement theory provides semi-analytical solution of average compressive strengths for various kinds of stiffened panels. The accuracy of average compressive strengths obtained from formulas of CSR(common structural rules) for tankers and kinematic displacement method are discussed in the fore part of this paper. Hull girder ultimate strengths using Smith method are also compared for different average compressive strengths. By comparing them with other benchmark results, it is concluded that the new method provides lower bounds, because hull girder strengths under the sagging and hogging moment conditions approach nearly lower bounds.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.551-560
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the men's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, the ratio of step length to his height, average velocity at the final 6~11 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and takeoff angle of COG. Swing up phase variables included: pole flexion angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height, run up velocity and approach position increased. However, horizontal velocity during the last two steps of the final approach decreased dramatically compared to speeds from 1990. These results reflect the change in both technique and improved physical fitness in pole vaulters. During extension, the peak height of COG averaged 0.3m higher then COG height when the pole was released. These specific results can help coaches and athletes modify training and improve performance.

• 전산구조공학
• /
• 제10권4호
• /
• pp.131-142
• /
• 1997

본 논문에서는 4차 손상유효 tensor를 이용하여 유한 탄소성변형에 대한 운동학적인 손상해석이 소개된다. 이는 뼈대구조에서의 연속체 손상역학의 유효응력개념을 통하여 이루어진다. 소규모 변형율상태에만 적용할 수 있는 등가변형율 혹은 에너지법과는 달리 제안된 운동학적인 방법은 유효변형율과 유한변형율에 적용할 수 있는 소규모 변형상태에 있어서의 손상탄소성변형율 사이의 관계를 제공한다. 이는 실제 형상과 가상의 유효형상 모두에 대한 변형장의 운동학을 직접 고려하여 수행된다. 이 방법은 등가변형율이나 변형율 에너지 경우처럼 소규모 변형율에 한정되지 않으며, 유한변형율에 대한 에너지등가의 가정과 일치함을 보여준다. 본 논문에서는 손상이 탄소성영역에서 운동학적으로 표현되며, 손상유효 tensor는 2차 손상 tensor를 통해 손상을 운동학적 측정값이 항으로 특징지워진다.