• Title/Summary/Keyword: technology development

Search Result 42,687, Processing Time 0.088 seconds

Optimum Nutrient Solution Strength for Korean Strawberry Cultivar 'Daewang' during Seedling Period (국내 육성 신품종 딸기 '대왕'의 육묘기 적정 배양액 농도)

  • Jun, Ha Joon;Jeon, Eui Hwan;Kang, Soo In;Bae, Geun Hye
    • Horticultural Science & Technology
    • /
    • v.32 no.6
    • /
    • pp.812-818
    • /
    • 2014
  • Raising seedlings is important for fruit crops and is especially significant for strawberries as it accounts for 80% of their cultivation. However, there are few studies on raising seedlings of strawberries by hydroponics. Since strawberries show clear differences in growth characteristics based on cultivar, it is necessary to develop suitable fertilizer formula, concentration and pH for each cultivar, and also to examine the amount of nutrient feeding appropriate for each medium type. A key to raising seedlings of strawberries by hydroponics is the development of strategies to manage the concentration of nutrient solution. The mother plants of 'Daewang' strawberries were planted on hydroponics benches filled with cocopeat on March 28, 2012. Three nutrient solution treatments were employed during the term of raising seedlings: a type that supplied EC $0.6dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [0.6 (30) + 20]; a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [1.2 (30) + 20]; and a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 50 days [1.2 (50)]. The plants were then planted on hydroponics benches filled with cocopeat on September 20, and managed with EC $0.6-0.8dS{\cdot}m^{-1}$ strawberry nutrient solution developed by Yamazaki. After planting, shoot growth, flowering rate and fruit quality of the first cluster were investigated. The petiole length, leaf length, leaf width and crown diameter showed the highest grown in the [1.2 (50)] treatment, followed by [1.2 (30) + 20], and then [0.6 (30) + 20], indicating that the higher concentration of nutrient solution was preferable for raising seedlings. However, the growth differences among treatments gradually disappeared as growth continued, and the crown diameter especially grew to exhibit almost no difference at all among treatments. The point of flowering came first in [0.6 (30) + 20], followed by [1.2 (30) + 20] and then [1.2 (50)]. The [0.6 (30) + 20] treatment showed much earlier flowering than other treatments, which implies that low-concentration nutrient solution may be beneficial to the flowering of 'Daewang' strawberries while raising seedlings. There was no statistically significant difference among treatments in fruit length, fruit diameter and fruit firmness. Fruit weight in [1.2 (50)] treatment was significantly higher than other treatments. However, soluble solids of fruit was the lowest in [1.2 (50)] treatment. Together, the results of this experiment imply that it is better to supply EC $0.6dS{\cdot}m^{-1}$ solution for 30 days and then supply only water for 20 days to adequately manage concentration of nutrient solutions during the period of raising seedlings of strawberries by hydroponics.

Horticultural Therapy: Job Analysis, Performance Evaluation, and Educational Needs (원예치료사의 직무 및 수행평가와 교육요구 분석)

  • Kim, Soo-Yun;Park, Sin-Ae;Son, Ki-Cheol;Lee, Chan
    • Horticultural Science & Technology
    • /
    • v.32 no.6
    • /
    • pp.887-900
    • /
    • 2014
  • This study was conducted to provide a job analysis for, and assess the job performance of horticultural therapists, as well as examine future educational needs. To this end, a chart developed using the DACUM method was chosen as the appropriate tool for the job analysis of horticultural therapists (Study 1). Based on the chart, a survey using an evaluation form was produced to investigate the current level of job performance and future required level of horticultural therapists (Study 2). A total of 8 duties and 45 tasks were classified to examine job performance, based on analysis of the DACUM Council (Study 1). These duties include A. Decide execution organization for horticultural therapy (HT) program, B. Diagnose and assess clients before starting the HT program, C. Plan HT program, D. Develop HT program, E. Prepare to implement HT program for each session, F. Implement HT program for each session, G. Implement overall assessment for HT program, and H. Develop oneself as a horticultural therapist. Their duties were broken down further into five to eight tasks per duty, totaling 45 tasks. Based on the horticultural therapist job performance sheet developed through this process, an assessment of the current job level of horticultural therapists was performed and future required level were examined (Study 2). The evaluation forms were sent to 779 horticultural therapists with level 1 or 2 certification via email or mail delivery. The analysis of 242 questionnaires (31.1%) revealed that horticultural therapists with level 1 certificates have a significantly higher job performance level for 34 of the 45 tasks. Regarding future required level, 20 out of 45 tasks were assessed as higher for level 1 horticultural therapists than level 2. In addition, a Borich formula was utilized to identify the priority of educational needs for the 45 horticultural therapist tasks. The results revealed the following top three tasks: H1. Receive feedback from the supervisor for the horticultural therapy program; A1. Distribute promotional materials about the horticultural therapy program; and H2. Submit a grant proposal for horticultural therapy program to organizations such as welfare foundations. The results of this study are anticipated to facilitate understanding and improve work conditions for current horticultural therapists or horticultural therapists-in-training. In addition, institutions that train horticultural therapists will be able to use this as basic research to develop a practical training curriculum.

Development of RAPD-SCAR Molecular Marker Related to Seed-hair Characteristic in Carrot (당근(Daucus carota var. sativa) 종자모 형질 관련 RAPD-SCAR 분자표지 개발)

  • Shim, Eun-Jo;Park, Sung-Kwan;Oh, Gyu-Dong;Jun, Sang-Jin;Park, Young-Doo
    • Horticultural Science & Technology
    • /
    • v.31 no.6
    • /
    • pp.756-763
    • /
    • 2013
  • Mechanical hair removal of carrot seed causes seed injuries and suppresses the germination in carrot cultivation. This study was performed to develop molecular markers for breeding high quality cultivars with short-hair seed. To meet this objective, random amplified polymorphic DNA (RAPD)-sequence characterized amplified region (SCAR) markers specifically linked to seed-hair characteristic were identified using CT-SMR 616 OP 389-1 line with short-haired seed and CT-SMR 616 OP 616-33 line with long-haired seed, bred by self-pollination for 6 years from 2008 to 2013, as parents. After seed hair lengths of these lines were analyzed using microscope, next generations were advanced and compared with the molecular markers polymorphism. From RAPD analysis using fixed lines in 2011, twelve RAPD primers showing polymorphic bands specific between the two lines were identified from 80 random primers. To develop RAPD-SACR marker, SCAR primers were designed based on sequence analysis of these specific RAPD bands and more than three combinations of primers were tested. As a result, it was found that the $SCA2_{1.2}$ amplified single polymorphic band from short-haired seed line. To confirm this result, $SCA2_{1.2}$ marker was retested by applying to the 2012 and 2013 progenies. Finally, it was concluded that the developed $SCA2_{1.2}$ marker distinguished short-haired line from long-haired seed line. Therefore, SCAR marker, $SCA2_{1.2}$ is expected to be utilized for breeding of the short-haired seed cultivars.

Sorghum Extract Enhances Caspase-dependent Apoptosis in Primary Prostate Cancer Cells and Immune Activity in Macrophages (수수 추출물에 의한 primary 전립선 암세포의 caspase 의존성 apoptosis 유도 및 대식세포 면역활성 증가)

  • Cho, Hyun-Dong;Kim, Jeong-Ho;Hong, Seong-Min;Lee, Ju-Hye;Lee, Yong-Seok;Kim, Du-Hyun;Seo, Kwon-Il
    • Journal of Life Science
    • /
    • v.26 no.12
    • /
    • pp.1431-1437
    • /
    • 2016
  • Sorghum bicolor L. is one of the important minor cereals in Asia, Africa, and the central United States, and it is considered a rich source of polyphenols, flavonoids, and dietary fiber. However, there is a lack of data on the anti-cancer activity of Sorghum in prostate cancer cells and immune activity in macrophages. This study aims to investigate the potential effects of an ethanol extract of S. bicolor L. (SE) on inducing apoptosis in RC-58T/h/SA#4 cells and immunomodulatory activity in RAW 264.7 cells. SE significantly inhibited the viability of RC-58T/h/SA#4 primary prostate cancer cells in a dose-dependent manner. The morphology of RC-58T/h/SA#4 cells treated with SE was shrunken and involved the formation of an apoptotic body and nuclear condensation. In addition, SE markedly activated caspase-8, -9, and -3; increased the protein levels of Bax, p53, cleaved PARP, and cytosolic cytochrome c; and decreased Bcl-2 protein expression. Furthermore, the inhibition of caspases in RC-58T/h/SA#4 cells with z-VAD-fmk attenuated SE-induced cell growth inhibition. The production of nitric oxide (NO) was also elevated by SE treatment, as revealed by immune response parameters. These results suggest that SE inhibits growth and induces apoptosis in primary human prostate cancer cells in a caspase-dependent manner, and it modulates the immune functions in macrophages. Therefore, Sorghum bicolor L. may be used as a functional food to prevent prostate cancer and enhance immune activity.

Development of Assay Methods for Enterotoxin of Escherichia coli Employing the Hybridoma Technology (잡종세포종기법을 이용한 대장균의 장독소 측정법 개발)

  • Kim, Moon-Kyo;Cho, Myung-Je;Park, Kyung-Hee;Lee, Woo-Kon;Kim, Yoon-Won;Choi, Myung-Sik;Park, Joong-Soo;Cha, Chang-Yong;Chang, Woo-Hyun;Chung, Hong-Keun
    • The Journal of the Korean Society for Microbiology
    • /
    • v.21 no.1
    • /
    • pp.151-161
    • /
    • 1986
  • In order to develop sensitive and sepcific assay methods for E. coli heat labile enterotoxin(LT) hybridoma cell lines secreting LT specific monoclonal antibody were obtained. LT was purified from cell lysate of E. coli O15H11. The steps included disruption of bacteria by French pressure, DEAE Sephacel ion exchange chromatography, Sephadex G200 gel filtration, and second DEAE Sephacel ion exchange chromatography, successively. Spleen cells from Balb/c mice immunized with the purified LT and $HGPRT^{(-)}$ plasmacytomas, $P3{\times}63Ag8.V653$ were mixed and fused by 50% (w/v) PEG. Hybrid cells were grown in 308 wells out of 360 wells, and 13 wells out of them secreted antibodies reacting to LT. Among these hybridoma cell 1G8-1D1 cell line was selected since it had produced high-titered monoclonal antibody continuously. By using culture supernatant and ascites from 1G8-1D1 cells the monoclonal antibody was characterized, and an assay system for detecting enterotoxigenic E. coli was established by double sandwich enzyme-linked immunosorbent assay (ELISA). The following results were obtained. 1. Antibody titers of culture supernatant and ascites from 1G8-1D1 hybridoma cells were 512, and 102, 400, respectively by GM1-ELISA and its immunoglobulin class was IgM. 2. The maximum absorption ratio of 1G8-1D1 cell culture supernatant to LT was 90% at $300\;{\mu}g/ml$ of LT concentration. LT concentration shown at 50% absorption ratio was $103.45{\mu}g$ and the absorption ratio was decreased with tile reduction of LT concentration. This result suggests that monoclonal antibody from 1G8-1D1 hybridoma cell bound with LT specifically. 3. The reactivities of 1G8-1D1 cell culture supernatant to LT and V. cholerae enterotoxin(CT) were 0.886 and 0.142(O.D. at 492nm) measured by the GM1-ELISA, indicating 1G8-1D1 monoclonal antibody reacted specifically with LT but not with CT. 4. The addition of 0.1ml of ascites to 0.6mg and 0.12mg of LT decreased the vascular permeability factor to 41% and 44% respectively, but it did not completely neutralize LT. 5. By double sandwich ELISA using monoclonal antibody, as little as 75ng of the purified LT per ml could be detected. 6. The results by assay of detecting LT in culture supernatants of 14 wild strains E. coli isolated from diarrhea patients by the double sandwich ELISA were almost the same level as those by reverse passive latex agglutination.

  • PDF

Changes in Quality of Fried Rice with Red Snow Crab Meat Depending on the Storage Period and Temperature (저장기간 및 저장온도에 따른 붉은대게풍미 볶음밥의 품질변화)

  • Jung, Ji Hee;Lim, Ji Hoon;Jeong, Min Jeong;Jeong, In Hack;Kim, Byoung Mok
    • Korean journal of food and cookery science
    • /
    • v.31 no.4
    • /
    • pp.387-394
    • /
    • 2015
  • The red snow crab lives at a depth 200-2,000 m in the east coast. It has a smooth taste with a rich texture. However mostly red snow crab are only utilized materials. For seafood development, research is needed on using red snow crab in various products. In this study, quality changes in fried rice prepared with red snow crab meat, red snow crab emulsion sauce and red snow crab effluent were investigated. Physicochemical, microbiological and sensory characteristics were determined during storage at -20, 4 and $25^{\circ}C$ for 5 weeks to assess changes in the quality of the fried rice. The pH and acidity values did not show any significant differences at $-20^{\circ}C$. The VBN and TBA values of fried rice stored at 4 and $25^{\circ}C$ were significantly higher than those of fried rice stored at $-20^{\circ}C$ during the same storage period. The viable cell count of the fried rice stored at $-20^{\circ}C$ changed little during the storage period. During storage at $25^{\circ}C$, the overall quality was initially 8.0, but rapidly decreased to 1.0 after 5 weeks. In conclusion, the best storage temperature for both quality and safety was $-20^{\circ}C$. The storage condition for instant rice containing red snow crab affects the quality and we confirmed the applicability of using materials from red snow crab.

Monitoring Country-of-Origin Labels and Indication Contents for Meat on Electronic On-line Trading (전자상거래의 축산물 원산지 표시실태 및 표시규정 모니터링)

  • Nam, Jung-Oak;Nam, Bo-Ra;Park, Jung-Min;Lee, Ra-Mi;Gu, Hyo-Jung;Suh, Hyung-Joo;Chang, Un-Jae;Kim, Jin-Man
    • Food Science of Animal Resources
    • /
    • v.27 no.1
    • /
    • pp.117-121
    • /
    • 2007
  • The number of internet users and the scale of electronic on-line trading are on the increase due to the development of information technology and the internet. The aim of this study was to monitor the accuracy of country-of-origin labels and the indicated contents of meat available by electronic on-line trading by using a structural interview sheet for 100 on-line meat product markets. The result of this investigation showed a 100% level of accuracy for business name and telephone number whereas the company address, meat manufacturer and supplier, and business registration were less reliable. We also investigated the accuracy of site policy, e-mail address, and fax number. The results showed that the accuracy of fax numbers was the lowest. The product name and the kind of meat actually in the product showed a 100% level of conformity, while the price (96.3%), place of origin (93.6%), capacity (90.4%), meat parts (80.9%) and contents of the product (73.4%) showed a relatively low level of conformity. Serious safety issues were exposed by the disturbingly low 20.2% accuracy of indicated expiration dates and 5.3% accuracy of indicated manufacturing dates. To ensure food safety, it is essential to improve consumer understanding and trust regarding food safety through continuous public relations. More education and information are needed to raise consumer awareness of the facts versus myths regarding food safety.

Modification of WASP5 for Ungauged Watershed Management and Its Application (미계측 유역관리를 위한 WASP5 모형의 개선 및 적용성 검토)

  • Kim, Jin-Ho;Shin, Dong-Suk;Kwun, Soon-Kuk
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.9 no.1
    • /
    • pp.29-36
    • /
    • 2007
  • This study was carried out to develop a water quality simulation model for the evaluation of an ungauged watershed. For this purpose, the WASP5 model was selected and modified. The model consists of three sub-models, LOAD-M, DYN-M, and EUT-M. LOAD-M, an empirical model, estimates runoff loadings using point and non-point source data of villages. The Geum River Estuary watershed was selected to calibrate and verify the Modified-WASP5. The LOAD-M model was established using field data of water quality and quantity at the gauging stations of the watershed and was applied to the ungauged watersheds, taking the watershed properties into consideration. The result of water quality simulation using Modified-WASP5 shows that the observed average BOD data from Gongju and Ganggyeong were 2.6 mg/L and 2.8 mg/L, and the simulated data were 2.5 mg/L and 2.4 mg/L, respectively. Generally, simulation results were in good agreement with the observed data. This study focused on formulating an integrated model for evaluating ungauged watersheds. Even though simulation results varied slightly due to limited availability of data, the model developed in this study would be a useful tool for the assessment and management of ungauged watersheds.

Effects of Dietary Supplementation of Betaine on Performance, Lipid Metabolic Parameters, and Blood and Ileal Osmolality in Laying Hens (비태인의 급여가 산란계의 생산성과 지질대사 관련인자, 소화물의 삼퉁성에 미치는 영향)

  • Ryu, Myeong-Seon;Park, Jae-Hong;Shin, Ki-Hyeong;Na, Jong-Sam;Ryu, Kyeong-Seon
    • Korean Journal of Poultry Science
    • /
    • v.30 no.4
    • /
    • pp.259-267
    • /
    • 2003
  • Two experiments were conducted to investigate the effect of betaine on egg production, lipid metabolism, and osmoregulation in 18-to 42-week-old ISA Brown laying hens. In experiment 1, three hundred and sixty one hens were fed a com-soy basal diet contailing 16% crude protein (CP), 2800 kcal/kg metabolizable energy (ME), 0.33% methionine, and 0, 300, 600, or 1200 mg betaine per kg diet. Egg production, egg weight, feed consumption, feed conversion, and egg quality were measured every eight weeks. Betaine concentration in live and egg were determined along with serum cholesterol, abdominal fat, total serum protein and albumin levels. In experiment 2, twenty thirty-three-week-old laying hens were fed the same diets as those used in experiment 1 in individual cages and the amount of feed and water consumption were measured for two weeks. At the end of experiment 2, all birds were killed to determine blood plasma and ileal osmopressure, arginine vasotocin (AVT), and liver moisture content. In experiment 1, egg production between the treatments during the first eight weeks were not different, whereas the significant increment of egg production were noticed in the birds fed more than 600 ppm betaine after reaching the peak egg production stage (p<0.05). The egg weight was reduced significantly by the betaine supplementation for the first 8 weeks (p<0.05). Feed conversion tended to improve by betaine supplement. Egg quality was not enhanced by betaine supplementation. Liver betaine level increased with betaine feeding compared to the control but betaine concentration in eggs decreased with betaine supplementation. Betaine supplementation elevated the level of serum total cholesterol and triglyeerides compared to the control. Abdominal fat content was increased by betaine supplementation, whereas liver fat content decreased. In experiment 2, water consumption significantly increased in hens fed diets containing 300 and 600 mg betaine/kg (p<0.05) and osmotic pressure of ileal digesta increased with betaine supplement. Liver moisture content was not affected by betaine, but AVT increased in hens fed betaine. The overal results suggested the possibility of using betaine as a feed additives in the laying hens beacuse of its positive contribution to improving egg production and other metabolic parameters related to lipid metabolism.

Modelling of Fault Deformation Induced by Fluid Injection using Hydro-Mechanical Coupled 3D Particle Flow Code: DECOVALEX-2019 Task B (수리역학적연계 3차원 입자유동코드를 사용한 유체주입에 의한 단층변형 모델링: DECOVALEX-2019 Task B)

  • Yoon, Jeoung Seok;Zhou, Jian
    • Tunnel and Underground Space
    • /
    • v.30 no.4
    • /
    • pp.320-334
    • /
    • 2020
  • This study presents an application of hydro-mechanical coupled Particle Flow Code 3D (PFC3D) to simulation of fluid injection induced fault slip experiment conducted in Mont Terri Switzerland as a part of a task in an international research project DECOVALEX-2019. We also aimed as identifying the current limitations of the modelling method and issues for further development. A fluid flow algorithm was developed and implemented in a 3D pore-pipe network model in a 3D bonded particle assembly using PFC3D v5, and was applied to Mont Terri Step 2 minor fault activation experiment. The simulated results showed that the injected fluid migrates through the permeable fault zone and induces fault deformation, demonstrating a full hydro-mechanical coupled behavior. The simulated results were, however, partially matching with the field measurement. The simulated pressure build-up at the monitoring location showed linear and progressive increase, whereas the field measurement showed an abrupt increase associated with the fault slip We conclude that such difference between the modelling and the field test is due to the structure of the fault in the model which was represented as a combination of damage zone and core fractures. The modelled fault is likely larger in size than the real fault in Mont Terri site. Therefore, the modelled fault allows several path ways of fluid flow from the injection location to the pressure monitoring location, leading to smooth pressure build-up at the monitoring location while the injection pressure increases, and an early start of pressure decay even before the injection pressure reaches the maximum. We also conclude that the clay filling in the real fault could have acted as a fluid barrier which may have resulted in formation of fluid over-pressurization locally in the fault. Unlike the pressure result, the simulated fault deformations were matching with the field measurements. A better way of modelling a heterogeneous clay-filled fault structure with a narrow zone should be studied further to improve the applicability of the modelling method to fluid injection induced fault activation.