• 한국재료학회지
• /
• 제32권5호
• /
• pp.270-279
• /
• 2022

In this study, N/S co-doped carbon felt (N/S-CF) was prepared and characterized as an electrode material for electric double-layer capacitors (EDLCs). A commercial carbon felt (CF) was immersed in an aqueous solution of thiourea and then thermally treated at 800 ℃ under an inert atmosphere. The prepared N/S-CF showed a large specific surface area with hierarchical pore structures. The electrochemical performance of the N/S-CF-based electrode was evaluated using both 3-electrode and 2-electrode systems. In the 3-electrode system, the N/S-CF-based electrode showed a good specific capacitance of 177 F/g at 1 A/g and a good rate capability of 41% at 20 A/g. In the 2-electrode system (symmetric capacitor), the freestanding N/S-CF-based electrode showed a specific capacitance of 275 mF/cm² at 2 mA/cm², a rate capability of 62.5 % at 100 mA/cm², a specific power density of ~ 25,000 mW/cm² at an energy density of 23.9 mWh/cm², and a cycling stability of ~ 100 % at 100 mA/cm² after 20,000 cycles. These results indicate the N/S co-doped carbon felts can be a promising candidate as a new electrode material in a symmetric capacitor.

• 한국재료학회지
• /
• 제31권3호
• /
• pp.150-155
• /
• 2021

Zinc oxide (ZnO) based transparent conducting oxides (TCO) thin films, are used in many applications such as solar cells, flat panel displays, and LEDs due to their wide bandgap nature and excellent electrical properties. In the present work, fluorine and aluminium-doped ZnO targets are prepared and thin films are deposited on soda-lime glass substrate using a RF magnetron sputtering unit. The aluminium concentration is fixed at 2 wt%, and the fluorine concentration is adjusted between 0 to 2.0 wt% with five different concentrations, namely, Al2ZnO98(AZO), F0.5AZO97.5(FAZO1), F1AZO97(FAZO2), F1.5AZO96.5(FAZO3), and F2AZO96(FAZO4). Thin films are deposited with an RF power of 40 W and working pressure of 5 m Torr at 270 ℃. The morphological analysis performed for the thin film reveals that surface roughness decreases in FAZO1 and FAZO2 samples when doped with a small amount of fluorine. Further, optical and electrical properties measured for FAZO1 sample show average optical transmissions of over 89 % in the visible region and 82.5 % in the infrared region, followed by low resistivity and sheet resistance of 3.59 × 10-4 Ωcm and 5.52 Ω/sq, respectively. In future, these thin films with excellent optoelectronic properties can be used for thin-film solar cell and other optoelectronics applications.

• Korean Chemical Engineering Research
• /
• 제52권2호
• /
• pp.205-208
• /
• 2014

본 논문에서는 유기전자소자의 반도체 물질로 많이 사용되는 poly(9,9-dioctylflurorene) (PFO), poly(9,9-dioctylfluorene-co-benthiadiazole) (F8BT), (regioregular poly(3-hexylthiophene) (P3HT)를 기반으로 하는 균일한 크기와 특성을 가지는 고분자 나노와이어를 AAO 템플레이트를 이용하여 대량으로 제작하였다. 제작된 나노와이어는 결점이 없이 깨끗한 표면을 보였으며, 약 250~300 nm의 지름과 ${\sim}30{\mu}m$의 일정한 길이를 가지고 있었다. 나노와이어들은 스프레이 분사 방법을 통하여 유리 기판 위에 균일하게 분사할 수 있었으며, PFO와 F8BT 나노와이어의 경우 UV 빛의 조사하에 각각 나노와이어의 전체에 걸쳐서 왜곡없이 밝은 yellow와 blue luminescence를 보였다.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1135-1144
• /
• 2023

In this paper, bending strength and permeability tests were conducted on concrete permeable blocks manufactured by recycling industrial by-products of oyster shell and blast furnace slag to measure and compare bending strength and permeability coefficient, and present experimental research results. To this end, a total of 54 specimens with a size of 200x200x60mm for surface layer and base layer were manufactured, and bending strength and permeability test were carried ourt accoridng to KS F 4419. Eighteen types of mixing designs were implemented by varying the mixing and replacement rates of oyster shells and blast furnace slag. As a result of the experiment, the higher the mixing ratio of oyster shell, the lower the bending strength and the permeability coefficient. Thereafter, a total of three permeable blocks with dimensions of 200x200x60mm were manufactured and subjected to bending strength and permeability tests according to KS F 4419. As a result of the test, the bending strength satisfies the standard of KS F 4419, and the permeability coefficient is 12 times higher than the standard of KS F 4419. It seems that the proper mixing of oyster shells and blast furnace slag increases the amount of air, and further research on durability and economic feasibility of materials used to manufacture permeable blocks is required.

• 한국재료학회지
• /
• 제10권8호
• /
• pp.525-531
• /
• 2000

플라즈마 화학증착법을 이용하여 Corning glass 1737 기판에 안티몬 도핑 산화주석 박막을 증착하였다. 플라즈만 화학증착시 반응변수에 따른 박막의 결정상 및 형성된 표면거칠기에 대하여 XRD와 AFM을 이용하여 검토하였다. 반응온도 $450^{\circ}C$, 유입가스비 R[$P_{SbCl}P_{{SnCl}_4}$]=1.12, r.f. power 30W에서 비교적 결정성이 뛰어난 박막을 얻을 수 있었다. 화학증착법(TCVD)에 비해 플라즈마 열화학증착법(PECVD)으로 얻은 박막의 표현형상이 보다 균일하였다. 안티몬 도핑농도가 증가할수록, 증착온고가 낮을수록, 증착두께가 작을수록 박막의 표면거칠기가 보다 감소하였다.

• 멤브레인
• /
• 제28권6호
• /
• pp.424-431
• /
• 2018

Cobalt tetraphenylporphyrin-benzylimidazole (CoTpp-BIm)을 산소 운반체로 이용하여 polyethersulfone (PES)와의 혼합물을 기반으로 하는 혼합 구조의 평판형 분리막의 기체 분리 성능을 조사하였다. CoTpp-BIm이 혼합된 PES막은 손가락 구조와 스폰지형 구조가 혼합된 비대칭 구조를 가졌고, 상부표면은 치밀한 형태를 보였다. 기체분리 성능 실험은 94%의 $N_2$ 기체에 6%의 $O_2$가 혼합된 기체를 사용하여 평가하였다. 산소 및 질소 투과율은 ${\Delta}P$가 15~228 cmHg 범위에서 실험하였고, PES막의 투과면은 진공수준으로 유지되었다. CoTpp-BIm이 혼합된 PES막의 산소 투과율은 공급 압력이 감소함에 따라 증가하였다. 공급 압력이 15 cmHg일 때 산소 투과율($P_{O_2}$)는 6676 Barrer이었고, $O_2/N_2$ 선택도(${\alpha}$)는 6.1, 촉진인자(F)는 2.39까지 증가하였다. 이를 바탕으로 PES막에 CoTpp-BIm을 첨가하면 산소분리 특성이 향상되는 것을 확인하였다.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.96-101
• /
• 2021

NaNbO₃:Eu³⁺ phosphor thin films were grown on quartz substrates by radio-frequency magnetron sputtering at a growth temperature of 100 ℃, with subsequent annealing at temperatures of 800, 900, and 1000 ℃. The effects of annealing temperature on the structural, morphological, and optical properties of the thin films were investigated. The NaNbO₃:Eu³⁺ sputtering target was synthesized by a solid-state reaction of raw materials Na₂CO₃, Nb₂O₅, and Eu₂O₃. The X-ray diffraction patterns exhibited that the thin films had two mixed phases of NaNbO₃ and Eu₂O₃. Surface morphologies were investigated by using field emission-scanning electron microscopy and indicated that the grains of the thin film annealed at 1000 ℃ showed irregular shapes with an average size of approximately 300 nm. The excitation spectra of Eu³⁺-doped NaNbO₃ thin film consisted of a strong charge transfer band centered at 304 nm in the range of 240-350 nm and two weak peaks at 395 and 462 nm, respectively, resulting from the ⁷F₀→⁵L₆ and ⁷F₀→⁵H₂ transitions of Eu³⁺ ions. The emission spectra under excitation at 304 nm exhibited an intense red band centered at 614 nm and two weak bands at 592 and 681 nm. As the annealing temperature increased from 800 ℃ to 1000 ℃, the intensities of all the emission bands and the band gap energies gradually increased. These results indicate that the higher annealing temperature enhance the luminescent properties of NaNbO₃:Eu³⁺ thin films.

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.152-157
• /
• 2021

Stainless steel is a metal that does not generate rust. Due to its excellent workability, economic feasibility, and corrosion resistance, it is used in various industrial fields such as ships, piping, nuclear power, and machinery. However, stainless steel is vulnerable to corrosion in harsh environments. To solve this problem, its corrosion resistance could be improved by electrochemically forming an anodized film on its surface. In this study, 316L stainless steel was anodized at room temperature with ethylene glycol-based 0.1 M NH₄F and 0.1M H₂O electrolyte to adjust the thickness of the oxide film using different anodic oxidation voltages (30 V, 50 V, and 70 V) with time control. The anodic oxidation experiment was performed by increasing the time from 1 hour to 7 hours at 2-hour intervals. Corrosion resistance according to the thickness of the anodic oxide film was observed. Electrochemical corrosion behavior of oxide films was investigated through polarization experiments.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권3호
• /
• pp.41-44
• /
• 2021

We developed an optimization process of the pulsed laser deposition method to grow epitaxial CeCoIn₅ thin films on MgF₂ substrates. The effects of different deposition parameters on film growth were extensively studied by analyzing the measured X-ray diffraction patterns. All the deposited films contained small amounts of CeIn₃ impurity phase and misoriented CeCoIn₅, for which the c-axis of the unit cell is perpendicular to the normal vector of the substrate surface. The deposition temperature, target composition, laser energy density, and repetition rate were found effective in the formation of (00l)-oriented CeCoIn₅ as well as the undesired phases such as CeIn₃, misoriented CeCoIn₅ along the (112) and (h00). Our results provide a set of deposition parameters that produce high-quality epitaxial CeCoIn₅ thin films with sufficiently low amounts of impurity phases and can serve as a reference for future studies to optimize the deposition process further.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.753-756
• /
• 2001

This research made a study of MnO$_2$electrode for supercapacitor with a diffuser (Polyvinyl alcohol). Manganese dioxide was used as active material. We tried to increase specific surface area by adding PVA. Manganese dioxide was synthesized by a sol-gel method using fumaric acid and oxalic acid in low temperature with high yield. Therefore, We prepared Manganese dioxide powder. This powder was used by active materials. The electrode was made by a mixture of active material, ketjen-black which is a large specific surface area, and PVdF-co-HFP as binder agent with using Nickel mesh as current collector. Here we reported on the synthesis and electrochemical performance of a enhanced material. All active materials have been submitted to X-ray diffraction and Scanning electron microscopy.