• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.70-78
• /
• 2000

새로운 램프-적분을 이용한 용량차-시간차 변환기를 제안했다. 제안된 회로는 상하대칭으로 두개의 전류 미러, 두 개의 슈미트 트리거, 그리고 제어 논리-회로로 구성된다. 전체 회로를 개별 소자들로 꾸며, 실험한 결과, 제안된 변환기의 센서 커패시터가 295㎊에서 375㎊까지의 커패시턴스 변화에서 1%보다 작은 시간간격(펄스 폭)의 선형 오차를 가진다는 것을 알았다. 제안된 변환기가 335㎊의 센서 커패시턴스를 가질 때, 측정된 용량차와 시간차는 각각 40㎊와 0.2ms이었다. 이 시간차를 빠르고 안정된 클럭으로 카운트함으로써 고 분해능을 제공한다는 것을 알았다. 새로운 램프-적분을 이용한 용량차-시간차변환기를 사용하여 디지털 습도 조절기를 설계하고 실험하였다. 제안된 회로는 전원 전압이나 온도 변화에도 불구하고 용량차에는 거의 영향을 받지 않는다. 또한, 제한된 회로는 적은 수의 MOS 소자로 실현되므로, 작은 칩 면적 위에 집적화 할 수 있는 특징을 갖는다. 따라서 이 회로는 온-칩(on-chip) 인터페이스 회로로 적합하다.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.319-325
• /
• 2020

본 논문에서 모바일 기기에 적용하는 DCM DC-DC 벅 변환기를 설계하였다. 이 변환기는 안정된 동작을 위한 보상기, PWM 로직과 파워 스위치로 구성되어 있다. 작은 하드웨어 폼-팩터를 얻기 위하여 칩 외부에서 사용하는 소자의 갯수를 최소화하여야 하며 이는 효율적인 주파수 보상과 디지털 스타트-업 회로로 구현하였다. 매우 작은 부하 전류에서 효율의 감소를 막기 위하여 버스트-모드 동작도 구현하였다. DCM 벅 변환기는 0.18um BCDMOS 공정으로 제작되었다. 2.8~5V의 입력 전압 범위에 대하여 출력 전압 값은 외부 저항 소자를 사용하여 1.8V로 프로그램 되었다. 1MHz의 스위칭 주파수 및 100mA의 부하 전류에서 측정된 최대 효율은 92.6%이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.117-117
• /
• 2008

In MIM capacitor, poly-Si bottom electrode is replaced with metal bottom electrode. Noble metals can be used as bottom electrodes of capacitors because they have high work function and remain conductive in highly oxidizing conditions. In addition, they are chemically very stable. Among novel metals, Ru (ruthenium) has been suggested as an alternative bottom electrode due to its excellent electrical performance, including a low leakage of current and compatibility to high dielectric constant materials. Chemical mechanical planarization (CMP) process has been suggested to planarize and isolate the bottom electrode. Even though there is a great need for development of Ru CMP slurry, few studies have been carried out due to noble properties of Ru against chemicals. In the organic chemistry literature, periodate ion ($IO_4^-$) is a well-known oxidant. It has been reported that sodium periodate ($NaIO_4$) can form $RuO_4$ from hydrated ruthenic oxide ($RuO_2{\cdot}nH_2O$). $NaIO_4$ exist as various species in an aqueous solution as a function of pH. Also, the removal mechanism of Ru depends on solution of pH. In this research, the static etch rate, passivation film thickness and wettability were measured as a function of slurry pH. The electrochemical analysis was investigated as a function of pH. To evaluate the effect of pH on polishing behavior, removal rate was investigated as a function of pH by using patterned and unpatterned wafers.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.220-224
• /
• 2012

The analysis on the bus bar effect is conducted to develop a cost effective 24kV/2,000A switchgear. The temperature enclosures and bus bars could rise due to several heat sources such as eddy current losses and copper losses. Therefore, a study on the characteristics of the electric field intensity and electromagnetic loss according to the bus bar size in a bus bar compartment is essential to design a electrically reliable high voltage switchgear. It is investigated that the electromagnetic influence to the temperature rising and the dielectric stability according to various bus bar sizes by using finite element method(FEM). The electric field intensity and electromagnetic loss according to various bus bar sizes are calculated to design a reliable and a high voltage switchgear. As results, it is found that the electromagnetic loss and the dielectric stability of bus bar could be determined by a bus bar size. It means that a cost effective 24kV/2,000A high voltage switchgear could be developed by selecting the proper size of a bus bar. Also, it is recognized that the electromagnetic characteristics according to various bus bar sizes in order to design an electrically stable high voltage switchgear when the enclosure size is determined as a fixed value. Futhermore, studies on the various nominal voltage class and bus bar sizes will be conducted to develop a cost effective high voltage switchgear.

• 전기학회논문지P
• /
• 제63권4호
• /
• pp.290-294
• /
• 2014

PID(Proportional, Integral, Derivative) controller is the most popular process controllers in nuclear power plants. The optimized parameter setting of the process controller contributes to the stable operation and the efficiency of the operating nuclear power plants. PID parameter setting is tuned when new process control systems are installed or current process control systems are changed. When the nuclear plant is shut down, a lot of PID tuning methods such as the Trial and Error method, Ultimate Oscillation method operation, Ziegler-Nichols method, frequency method are used to tune the PID values. But inadequate PID parameter setting can be the cause of the unstable process of the operating nuclear power plant. Therefore the results of PID parameter setting should be simulated, optimized and finally verified. This paper introduces the simulation method of PID tuning to optimize the PID parameter setting and confirms them of the actual PID controller in the operating nuclear power plants. The simulation method provides the accurate process modeling and optimized PID parameter setting of the multi-loop control process in particular.

• 전력전자학회논문지
• /
• 제20권6호
• /
• pp.517-525
• /
• 2015

A grid connected inverter must be operated as the main electricity source under an isolated condition caused by the grid problem. Conventionally, the dual loop controller is used for the grid inverter, and the controller is used for control under the stand-alone mode. Generally, the PI(Proportional - Integral) controller is highly efficient under a synchronous reference frame, and stable control can be available. However, in this synchronous frame-based control, high-quality DSP is required because many sinusoidal calculations are necessary. When the PI control is conducted under a stationary frame, the controller constructions are made simple so that they work even with a low-price micro controller. However, given the characteristics of the PI controller, it should be designed with the phase of reference voltage considered. Otherwise, the phase delay of the output voltage can occur. Although the current controller also has a higher bandwidth than the voltage controller, distortion of the voltage is difficult to avoid only by the rapid response of the PI controller, as a sudden load change can occur in the nonlinear load. In this study, a new control method that solves the voltage controller bandwidth problem and rapidly copes with it even in the nonlinear load situation is proposed. The validity of the proposed method is proved by simulation and experimental results.

• 전력전자학회논문지
• /
• 제20권6호
• /
• pp.550-557
• /
• 2015

The Jeju Special Self-Governing Province is currently promoting the "Carbon-free Island by 2030" policy, which requires the use of renewable energy instead of fossil fuel so that the island will have no carbon gases generated by 2030. To implement this policy, the island plans to build a wind power plant capacity of 1.09 GW in 2020; this wind power plant is currently ongoing. However, when wind power output is greater than the power demand of the island, the stability of Jeju Island power system must be prepared for it because it can be a problem. Therefore, this study proposes a voltage source-type MMC-HVDC system linked to mainland Korea to expand the wind power penetration limits of Jeju Island under the stable operation of the Jeju Island power system. To verify the effectiveness of the proposed scheme, computer simulations using the PSCAD/EMTDC program are conducted, and the results are demonstrated. The scenarios of the computer simulation consist of two cases. First, the MMC-HVDC system is operated under variable wind power in the Jeju Island power system. Second, it is operated under the predicted Jeju Island power system in 2020.

• 한국통신학회논문지
• /
• 제34권2B호
• /
• pp.130-142
• /
• 2009

본 논문에서는 기존의 TCP 변종들을 바탕으로 종단 간의 경로 상에서 나타나는 네트워크 특성에 가장 적응이 잘 이루어진 변종의 알고리즘을 선택하는 TCP의 자동 적응 프레임워크를 제안한다. 프로토콜 선택의 문제가 중요한 이유는 모든 네트워크 환경에 적합한 단일 버전의 프로토콜이 존재하지 않기 때문이며, 이것은 각 네트워크 마다 TCP의 성능 저하 원인이 서로 다르기 때문이다. 이러한 판단 및 프로토콜의 적응이 가능하게 하기 위해 본 논문에서는 기존에 연구되어 왔던 여러 가지 네트워크 측정 기법들과 TCP 변종들을 하나로 합치는 과정을 거쳤으며, 여기에 각 TCP들의 성능 정보들을 제공하여 세션 중간에 적절한 전송 알고리즘을 선택하여 사용할 수 있도록 하였다. 시뮬레이션 실험을 통해 우리는 종단 간으로 여러 환경 하에서 높은 성능을 이끌어낼 수 있다는 것을 보였으며, 제안한 방법이 지금까지 연구되어온 여러 TCP 변종들이 실제로 적절하게 활용될 수 있도록 하는데 중요한 역할을 할 것으로 판단한다.

• 농업과학연구
• /
• 제28권2호
• /
• pp.147-161
• /
• 2001

Efficiency and competitive power in agribusiness management has became important issue due to the rapid changes in farming environment under new WTO agreement. To increase competitive power, small-sized petty farm should be restructured to be specialized large-scaled farming system. Trust farming corporation(TFC) has been introduced to increase farm productivity and competitive power through large scale farming system and refined management skills. Eventually, TFCs are expected to revitalize rural economy. TFCs are increasing in numbers, but they are unsatisfactory in quality often with insolvent operations. The typical problems with TFCs are internal conflicts among members, lack of management abilities and incentives, inefficiency in machinery use, and insolvent operations. The self effort by members and legal-institutional assistance can alleviate the negative factors against the rational for cooperative management and sustain TFCs. This study identifies the management problems of TFCs. To provide the methods for increasing management efficiency, improving rational management skills, and hence to help revitalizing the rural economy with competitive power, 20 TFCs in Nonsan County is surveyed. The major findings are as follows; 1) According to the survey result of 20 trust farming corporations, investments on the accumulation of knowledges and information, accounting management, machinery management are required due to the present lack of management/accounting ability. There also exist problems associated with revenue sources, labor uses, and public recognition. To increase management efficiency under current situation, corporations should import active business plans with expanding farming execution and off-farm season business. 2) Based on the result of corporations' business analysis, more than 50% of the corporations were not able to provide profit dividends to the members. It suggests that trust farming corporations need appropriate and stable revenue sources to sustain business. It is also required that corporations should reduce their excessive expenditure on fixed assets. 3) Theoretical amounts of consignment fees for tillage operation, planting, and harvesting were found to be 338,874 won, 216,596 won, and 332,318 won, respectively. Although actual levels of fee are 110%~120% of these theoretical levels of consignment fee, corporations' expected fee levels could not be acheived because of competency of consignment market.

• 한국전산구조공학회논문집
• /
• 제21권5호
• /
• pp.429-437
• /
• 2008

본 논문에서는 비선형 정적해석 및 동적해석을 이용하여 가새골조의 연쇄붕괴 저항능력을 평가하였다. 모두 아홉 개의 서로 다른 가새 형태를 고려하였으며, 모멘트골조의 해석 결과와 비교하였다 비탄성 정적해석 결과에 따르면 현행 기준에 따라 설계된 저층 가새골조는 1층 중앙에 위치한 기둥이 제거될 경우 연쇄붕괴 저항성능 기준을 만족하는 것으로 나타났으나 대부분 취성적인 파괴모드를 나타내었다. 특히 압축가새가 좌굴한 후 인장가새가 인장력을 발휘하기 전에 취약한 층의 기둥이 좌굴하는 것으로 나타냈다. Inverted-V형 가새골조의 경우가 가장 연성도 면에서 우수한 것으로 나타났다. 동적 해석 결과에 따르면 모든 가새골조는 중앙에 위치한 기둥이 제거될 경우 붕괴되지 않으며, 동일한 규모의 모멘트 저항골조에 비해 진동이나 처짐량이 작은 것으로 나타났다.