• 한국패션뷰티학회지
• /
• 제4권3호
• /
• pp.35-39
• /
• 2006

The purpose of this study is to comparison on the sizing system in silver apparel brands with the KS standards. For the comparison research, 3 women's wear brands(suit style, knitted suit style, casual style) which were different apparel style on occasion in madame-zone of department stores were selected. The subject of investigation of sizing system of these brands were the label. The results of the sizing system of silver apparel brands as compared with the KS standards were as follows: 1) For the upper wear of suit style, it is larger than KS standards that size of height is $5{\sim}15$ cm. 2) For the lower wear of suit style, suitability of size of hip circumference is lower than KS standards. 3) For the casual style, it is larger than KS standards that size of height is $10{\sim}20$ cm.

• 한국의류학회지
• /
• 제33권5호
• /
• pp.827-839
• /
• 2009

Sizing system of Korean structural firefighting protective clothing that is national approved should be met for specification of structural firefighting protective clothing that is identified by Ministry of Public Administration and Security(MOPAS). However if you look over the specification of sizing system, the standard is based on only 'height' and the others are indicated as the size of completed product. KS K ISO 13688 and EN 340 which is met on ISO 13688 which indicates sizing system about protective clothing has the standards of height, chest and waist circumference. Also NFPA 1971 that has standards of sizing system is based on chest circumference, cervical to wrist length, waist circumference and inseam. That is different from Korean standards. Therefore, fire fighting protective clothing standards which is based on only height should be compensated and not be relied on foreign standards like ISO. It is indispensable for developing our own sizing system of structural fire fighting protective clothing. In this studying, Korean new sizing system of structural fire fighting protective clothing was developed for providing basic information of ergonomic structural fire fighting protective clothing. The analyzed target age was between 20 and 59 years old fire fighter who extinguish the fire. And it was analyzed by 3D measurement among data of the $5^{th}$ Size Korea. On conclusion, in case of structural fire fighting protective clothing coat, physical dimension was to be chest circumference, cervical to wrist length. Three dimensions as 5cm space of circumference and four dimensions as 2.5cm space of cervical to wrist length were derived, which means that totally 12 dimensions were defined. Dimension standards of pants was based on the analysis of waist circumference and crotch height. Six dimensions as 5cm space of waist circumference and three dimensions as 5cm space of crotch height were derived, which means that totally 14 dimensions were defined.

• 복식
• /
• 제54권6호
• /
• pp.77-90
• /
• 2004

The purpose of this study was to provide basic information requisite in the new sizing system for gloves. KS glove standards' size dimensions, size designation and labeling systems were analyzed. Also, KS glove standards' control sizes were compared to the anthropometric data of 824 Korean adults taken in the previous study. As well, the ISO hand size system was also compared to the anthropometric data of the previous study according to frequency tables of hand length and hand circumference. The size dimensions showed differences among KS standards and there was no size designation and labeling systems existed in KS standards. Among KS glove size systems, protective rubber gloves for radioactive contamination and surgical rubber gloves' size which followed ISO system were accurately indicate the hand size of the person a glove is intended to fit. ISO glove sizing system comprised the control dimensions of hand length and hand circumference. The coverage of ISO size A was 84.8% which was highest among ISO size A. B, C. And in hand circumference 178, 191, 203, 216mm showed the frequencies above 3% and in hand length 167, 175. 183, 191, 199mm showed the frequencies above 3%.

• 대한인간공학회지
• /
• 제33권5호
• /
• pp.337-354
• /
• 2014

Objective: The purpose of this study was to examine the various sizing systems and specified anthropometric data as well as the fit issues used today. Background: A standard sizing system for clothes is a system that is developed based on body shape and size classifications method. To develop an efficient sizing system, we have to classify the database from the majority of the samples. Method: The method of this paper deals with the secular trend of height spanning from 1997 to 2010 along with the morphological feature patterns for Koreans. It also investigates the comparison of the growth pattern between male and female and the body shape classification according to the drop values based on the anthropometric data samples of KATS taken from the 2010 surveys in order to develop and define the new guidelines for the size designation systems of clothes. Results: The results are classified with body size and shape categories according to the drop values by age and sex in order to develop the new guidelines for the size designation systems based on these body dimensions from the analyzed anthropometric database. Conclusion: These new guidelines for the size designation system will eliminate the confusion that currently exists among countries and individual apparel designers. Application: The adopted standards could be used to compare the sizing systems worldwide.

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.293-300
• /
• 2009

Customers purchasing souvenir T-shirts in famous tourist sites in Korea are mainly foreigners. Nevertheless, these T-shirts are manufactures according to Koreans' body shapes or manufactures' own size system. Moreover, sizes are labelled only by domestic norms. The purpose of this study is to suggest global standardized size for T-shirts, which will provide more precise size information for customers. For this, sizing standards including KS, ASTM, JIS, and EN were surveyed and were compared. And souvenir T-shirts were collected in the tourist resort and the sizing systems and labels were analysed from them. Finally, we proposed a sizing system and labelling as an international standard for souvenir T-shirts.

• 복식문화연구
• /
• 제24권2호
• /
• pp.233-247
• /
• 2016

The purpose of this study is to propose a specialized clothes-sizing system for elderly (aged 60~79) obese women satisfying the following conditions based on the data from the fifth Korean Agency for Technology and Standards (2004): a Rohrer's index of over 1.6, a BMI of over 25, and a WHR of over 0.85. The lower bodies of elderly obese women tends to be shorter and wider than average. Particularly, their torsos from the chest to the waist tend to be more obese than other areas. According to the KS standards, the clothes-sizing system sets up its size intervals as follows: 5cm in stature, 5cm and 3cm in bust, 3cm in waist, and 3cm in hip. Based on the dualistic distribution of each section, the names of the sections indicating high distribution are suggested. For suit tops, 11 sizes are selected as distributed in the 145-155cm stature section and 91-103cm bust section. For casual tops, nine sizes are selected as distributed in the 145-155cm stature section and 90-105cm bust section. For bottoms, 11 sizes are selected as distributed in the 82-97cm waist section and 91-97cm hip section. According to the KS standards, detailed sizes are suggested in the division of basic and reference areas.

• Steel and Composite Structures
• /
• 제44권5호
• /
• pp.603-617
• /
• 2022

Structural design, in general, is developed through trial and error technique which is guided by standards criteria and based on the intuition and experience of the engineer, a context that leads to structural over-dimensioning, with uneconomic solutions. Aiming to find the optimal design, structural optimization methods have been developed to find a balance between cost, structural safety, and material performance. These methods have become a great opportunity in the steel structural engineering domain since they have as their main purpose is weight minimization, a factor directly correlated to the real cost of the structure. Assuming an objective function of minimum weight with stress and displacement constraints provided by Brazilian standards, the present research proposes the sizing optimization and combined approach of sizing and shape optimization, through a software developed to implement the Simulated Annealing metaheuristic algorithm. Therefore, two steel plane frame layouts, each admitting four typical truss geometries, were proposed in order to expose the difference between the optimal solutions. The assessment of the optimal solutions indicates a notable weight reduction, especially in sizing and shape optimization combination, in which the quantity of design variables is increased along with the search space, improving the efficiency of the optimal solutions achieved.

• 한국의류학회지
• /
• 제29권1호
• /
• pp.1-12
• /
• 2005

This study was to suggest a feasible sizing system of infants and children's swim-suits. The basic body dimensions were selected after surveying the swimsuit manufacturers. The control dimensions and the secondary dimensions were taken from the 1997 National Anthropometric Survey data for the establishment of the sizing system. While in the current market swimsuit sizes were generally measured by the hip circumference for boys, and the bust and hip circumference for girls, the height was selected in this study as the control dimension because the height is well recognized by the customers and the KS standards specify the height to be the control dimension for infant's and children's wear. In the new sizing system of this study, the height was a control dimension, and hip was selected as a secondary dimension for boys. and bust and hip were selected as secondary dimensions for girls. Conclusively, in this study we suggest 12 sizes in case of 5cm height interval by the KS sizing system and 7 sizes in case of loom height interval by the current market sizing system, based on the height as a control dimension, for a standard swim-suit sizing system for infants and children.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.617-627
• /
• 2020

This study investigates the apparel sizing communication presented in online retail websites focusing on women's ready-to-wear tailored jackets and to analyze the meaning of these information as the actual product size guide factor. A total of 34 retail websites were selected based on the highest growth fashion companies list and the best fashion brands list. We collected size information in two types: size specifications including sizing code, body measurements, garment measurements, and size references including customized size guide tools, size information in customer reviews, model size information, and others. Most websites prefer to present garment measurements rather than body measurements that are recommended notations under Korean standards and related regulations. In addition, there was the absence of consistency in presenting measurements list and terms that can confuse consumers in size communication. This study found that the stature measurement was a key factor in size reference despite that it did not represent a proper garment size. The obsolete Korean numbering sizing code such as '55 and '66 was still used in many ways such as idiomatic expressions for body shape. It also implied that we can take advantage of the old sizing code for accessible size information. The finding of this study gives an in-depth diagnosis of current online sizing information problems and suggests useful basic data for developing online apparel size standards and marketing strategies.

• 복식문화연구
• /
• 제20권6호
• /
• pp.923-936
• /
• 2012

Apparel companies define their target customers to integrate consumers' needs into their product development processes. The sizing standards play a significant role in ready-to-wear garment business. Consumers' body build and sizes are different according to gender, age, and body type. The consumers' morphological feature of the one geographical area has changed with immigration, aging, and lifestyle change. In this study the way of defining body types in the standard garment sizing systems published in USA., UK, Germany, Japan, and Korea were compared. The results of this study show that most of the systems classified the body types by the index value. The chest-waist drop value was used for men's body type classification. Women's body types were defined by hip proportion. The hip-bust drop value was used for it. German and European garment sizing systems provide a wide range of men's body types. US men's garment sizes are developed for very conservative body type. US women's garment sizing system has had clearly defined women's body types. The Misses body types projected in the US garment sizing system had changed as women's waist girth got bigger compared to the past. In 2011 the US Misses sizes were divided into Curvy Misses size and Straight Misses size by the hip-waist drop value. The Curvy Misses sizes have smaller waist girth and larger hip girth than the Straight Misses sizes.