Journal of the Korean Society of Clothing and Textiles (한국의류학회지)

The Korean Society of Clothing and Textiles (한국의류학회)
권호 표지
DOI QR코드

DOI QR Code

Sizing System Development of Korean Structural Firefighting Protective Clothing

한국 소방용 방화복의 치수체계 개발

  • Han, Sul-Ah (Dept. of Clothing & Textiles, Seoul National University) ;
  • Nam, Yun-Ja (Dept. of Clothing & Textiles, Seoul National University/Research Institute of Human Ecology, Seoul National University) ;
  • Choi, Young-Lim (Dept. of Clothing & Textiles, Seoul National University)
  • 한설아 (서울대학교 의류학과) ;
  • 남윤자 (서울대학교 의류학과/서울대학교 생활과학연구소) ;
  • 최영림 (서울대학교 의류학과)
  • Published : 2009.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Sizing system of Korean structural firefighting protective clothing that is national approved should be met for specification of structural firefighting protective clothing that is identified by Ministry of Public Administration and Security(MOPAS). However if you look over the specification of sizing system, the standard is based on only 'height' and the others are indicated as the size of completed product. KS K ISO 13688 and EN 340 which is met on ISO 13688 which indicates sizing system about protective clothing has the standards of height, chest and waist circumference. Also NFPA 1971 that has standards of sizing system is based on chest circumference, cervical to wrist length, waist circumference and inseam. That is different from Korean standards. Therefore, fire fighting protective clothing standards which is based on only height should be compensated and not be relied on foreign standards like ISO. It is indispensable for developing our own sizing system of structural fire fighting protective clothing. In this studying, Korean new sizing system of structural fire fighting protective clothing was developed for providing basic information of ergonomic structural fire fighting protective clothing. The analyzed target age was between 20 and 59 years old fire fighter who extinguish the fire. And it was analyzed by 3D measurement among data of the $5^{th}$ Size Korea. On conclusion, in case of structural fire fighting protective clothing coat, physical dimension was to be chest circumference, cervical to wrist length. Three dimensions as 5cm space of circumference and four dimensions as 2.5cm space of cervical to wrist length were derived, which means that totally 12 dimensions were defined. Dimension standards of pants was based on the analysis of waist circumference and crotch height. Six dimensions as 5cm space of waist circumference and three dimensions as 5cm space of crotch height were derived, which means that totally 14 dimensions were defined.

Keywords

References

  1. 군복도 이제 맞춤서비스 시대. (2004, 4. 29). 국방일보 전자신문. 자료검색일 2008, 10. 17, 자료출처 http://kookbang.dema.mil.kr/
  2. 기술표준원. (2004a). 인체측정 표준용어집. 과천: 산업자원부 기술표준원
  3. 기술표준원. (2004b). 제5차 한국인 인체치수조사사업 보고서(2차년도 최종보고서). 과천: 산업자원부 기술표준원
  4. 김도식. (2006). 방화복의 열화특성에 관한 연구. 숭실대학교 대학원 박사학위 논문
  5. 병무청. (2002). 전문연구요원 및 산업기능요원의 관리규정(예규 3-7호). 대전: 병무청
  6. 이경화, 김혜수. (2007). 태권도복 표준치수체계 개발. 한국의류학회지, 31(11), 1530-1541
  7. 한국표준협회. (2004). KS K 0050 성인 남성복의 치수. 서울:한국표준협회
  8. 한국표준협회. (2007). KS K ISO 13688 보호복의 일반적인 요건. 서울: 한국표준협회
  9. 한설아, 남윤자, 최영림. (2008). 한국 소방용 방화복에 대한 만족도 조사. 복식, 58(9), 166-175
  10. 행정자치부. (2004). 소방용방화복규격서. 서울: 행정자치부
  11. Adams, P. S., Slocum, A. C., & Keyserling, W. M. (1994). A model for protective clothing effects on performance. International Journal of Clothing Science and Technology, 6(4), 6-16 https://doi.org/10.1108/09556229410054495
  12. Camenzind, M. A., Dale, D. J., & Rossi, R. M. (2007). Manikin test for flame engulfment evaluation of protective clothing: Historical review and development of a new ISO standard. Fire and Materials, 31, 285-295 https://doi.org/10.1002/fam.938
  13. CEN. (2003). EN 340 Protective clothing-General requirements. Brussels: CEN
  14. Eiser, D. N. (1988). Problems in personal protective equipment selection. Performance of Protective Clothing: Second symposium, ASTM STP 989, 341-346
  15. Huck. J. (1988). Protective clothing systems: A technique for evaluating restriction of wearer mobility. Applied Ergonomics, 19(3), 185−190 https://doi.org/10.1016/0003-6870(88)90136-6
  16. ISO. (1998). ISO 13688 Protective clothing-General requirements. Geneva: ISO
  17. Lawson, J. R. (1996). Fire fighter's protective clothing and thermal environments of structural fire fighting. U.S Department of Commerce, NISTIR 5804, 334-350
  18. Lawson, J. R. & Vettori, R. L. (2002). Thermal measurements for fire fighters' protective clothing. Thermal Measurements: The Foundation of Fire Standards, ASTM STP 1427, 168-182
  19. Morning Pride. (2008). Morning pride protective clothing (2008 Catalog)
  20. NFPA. (2007). NFPA 1971 Standard on protective ensembles for structural fire fighting and proximity fire fighting. Massachusettes: NFPA
  21. Roger, K. & Barker, L. (2001). Modeling of thermal protection outfits for fire exposure. National textile Center Annual Report. Pittsburgh: NTC

Cited by

  1. A Suggestion of the Size-designation for the Underweight Women's Tops in their 20s-30s vol.15, pp.3, 2013, https://doi.org/10.5805/SFTI.2013.15.3.423
  2. New Sizing System Development of Korean Male Military Winter Jacket vol.40, pp.5, 2016, https://doi.org/10.5850/JKSCT.2016.40.5.954
  3. An Analysis of Korean Anthropometric Measurements for the Development of a Disposable Protective Coveralls Sizing System vol.37, pp.8, 2013, https://doi.org/10.5850/JKSCT.2013.37.8.1117