• Journal of Integrative Natural Science
• /
• v.4 no.3
• /
• pp.182-186
• /
• 2011

Chemical modification of porous silicon surface has been investigated to have different physical surface properties. Porous silicon modified with dodecyl functionality exhibits hydrophobic feature, however the oxidation of porous silicon to modify with hydroxyl group displays hydrophilic properties. Surface characterization for both dodecyl and hydroxyl derivatized porous silicon was investigated by FT-IR spectroscopy. To determine the surface coverage, the amine functionalized surface was reduced by dithiothreitol (DTT) and the released 2-thiopyridone was quantified by UV/vis spectroscopy.

• ETRI Journal
• /
• v.26 no.4
• /
• pp.315-320
• /
• 2004

This paper proposes a 10-${\mu}m$ thick oxide layer structure that can be used as a substrate for RF circuits. The structure has been fabricated using an anodic reaction and complex oxidation, which is a combined process of low-temperature thermal oxidation (500 $^{\circ}C$ for 1 hr at $H_2O/O_2$) and a rapid thermal oxidation (RTO) process (1050 ${\circ}C$, for 1 min). The electrical characteristics of the oxidized porous silicon layer (OPSL) were almost the same as those of standard thermal silicon dioxide. The leakage current density through the OPSL of 10 ${\mu}m$ was about 10 to 50 $nA/cm^2$ in the range of 0 to 50 V. The average value of the breakdown field was about 3.9 MV/cm. From the X-ray photo-electron spectroscopy (XPS) analysis, surface and internal oxide films of OPSL prepared by a complex process were confirmed to be completely oxidized. The role of the RTO process was also important for the densification of the porous silicon layer (PSL) oxidized at a lower temperature. The measured working frequency of the coplanar waveguide (CPW) type short stub on an OPSL prepared by the complex oxidation process was 27.5 GHz, and the return loss was 4.2 dB, similar to that of the CPW-type short stub on an OPSL prepared at a temperature of 1050 $^{\circ}C$ (1 hr at $H_2O/O_2$). Also, the measured working frequency of the CPW-type open stub on an OPSL prepared by the complex oxidation process was 30.5 GHz, and the return was 15 dB at midband, similar to that of the CPW-type open stub on an OPSL prepared at a temperature of $1050^{\circ}C$ (1 hr at $H_2O/O_2$).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.47-49
• /
• 2004

Gate protection $SiN_x$ as an alternative to a conventional re-oxidation process in Dynamic Random Access Memory devices is investigated. This process can not only protect the gate electrode tungsten against oxidation, but also save the thermal budget due to the re-oxidation. The protection $SiN_x$ process is applied to the poly-Si gate, and its device performance is measured and compared with the re-oxidation processed poly-Si gate. The results on the gate dielectric integrity show that etch damage-curing capability of protection $SiN_x$ is comparable to the re-oxidation process. In addition, the hot carrier immunity of the $SiN_x$ deposited gate is superior to that of re-oxidation processed gate.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.202-209
• /
• 1999

Microstrip line was fabricated on the oxidized porous silicon layer which has nearly electrically and chemically identical properties with thermally oxidized silicon layer. Thick oxidized porous silicon layer of few tenth of micrometers was prepared by thermal oxidation of porous silicon layer on silicon substrate. Multi-step thermal oxidation process was used to obtain high Quality and thick oxidized silicon layer and to release thermal stress. Microstrip line was fabricated on the oxidized porous silicon layer. Its microwave characteristics were measured and the availability for MMIC substrate was investigated.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.121-126
• /
• 2014

The influence of a liquid medium duringa wet-milling process in the grinding and oxidation of silicon powder was investigated. Distilled water, dehydrated ethanol and diethylene glycol were used as the liquid media. The applied grinding times were 0.5, 3, and 12 h. Ground silicon powder samples were characterized by means of aparticle size analysis, scanning electron microscopy(SEM), x-ray powder diffraction (XRD), FT-IR spectroscopy and by a chemical composition analysis. From the results of the characterization process, we found that diethylene glycol is the most efficient liquid medium when silicon powder is ground using a wet-milling process. The FT-IR results show that the Si-O band intensity in an unground silicon powder is quite strongbecause oxygen becomes incorporated with silicon to form $SiO_2$ in air. By applying deionized water as a liquid medium for the grinding of silicon, the $SiO_2$ content increased from 4.12% to 31.7%. However, in the cases of dehydrated ethanol and diethylene glycol, it was found that the $SiO_2$ contents after grinding only changed insignificantly, from 4.12% to 5.91% and 5.28%, respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.106-114
• /
• 1994

The local oxidation of silicon (LOCOS) technology, which uses a silicon nitride film as an oxidation mask and a pad oxide beween the silicon nitride and the silicon substrate, has been widely used in integrated circuits for process simplicity. But, due to long brid's beak length, there are difficulties in scabilities. Many advanced isolation techniques have been wuggested for the feduction of bird's beak length. In this paper, we presented reduced bird's beak length using the polybuffered oxide and the silicon nitride as the sidewall. Also, investigating the electrical behavior of the parasitic Al-gate MOSFET on LOCOS, we proved the validity for new isolation process.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.383-386
• /
• 1988

In MOS integrated circuits, annealing after oxidation process is necessary to improve physical properties of silicon dioxide. With subsequent annealing in inert gases such as nitrogen or argon, and excess silicon bond is allowed time to complete the oxidation and surface charge density is reduced. In this paper, we will present effects of the rapid thermal annealing on silicon dioxide. In order to evaluate characteristics of silicon dioxide, we analyzed C-V curve dependent on annealing time and temperature, and presented variation of fixed oxide charge.

• Journal of information and communication convergence engineering
• /
• v.1 no.2
• /
• pp.67-69
• /
• 2003

The experimental studies for the etch properties of the oxide grown on silicon substrate, which is in diluted hydrogen fluoride (HF) solution, are presented. Using different ion implantation dosages, dopants and energies, silicon substrate was implanted. The wet etching in diluted HF solution is used as a mean of wafer cleaning at various steps of VLSI processing. It is shown that the wet etch rate of oxide grown on various implanted silicon substrates is a strong function of ion implantation dopants, dosages and energies. This phenomenon has never been reported before. This paper shows that the difference of wet etch rate of oxide by ion implantation conditions is attributed to the kinds and volumes of dopants which was diffused out into $SiO_2$ from implanted silicon during thermal oxidation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1033-1040
• /
• 1995

To simulate strength reliability and durability of ceramic parts under gas turbine application environments, particle impact damage behaviors in silicon carbide oxidized at 1673 K and 1523 K for 200 hours in atmosphere were investigated. The long-term oxidation produced a slight increase in the static fracture strength. Particle impact caused a spalling of oxide layer. The patterns of spalling and damage induced were dependent upon the property and impact velocity of the particle. Especially, the difference in spalling behaviors induced could be explained by introducing the formation mechanism of lateral crack and elastic-plastic deformation behavior at impact sit. At the low impact velocity regions, the oxidized SiC showed a little increase in the residual strength due to the cushion effect of oxide layer, as compared with the as-received SiC without oxide layer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.7
• /
• pp.767-773
• /
• 1988

We have proposed a new simple and easy method for the observation of OSF growth and shrinkage. This method is to observe the behavior of OSF in thedamaged region during oxidation as well as annealing process after introducing mechanical damage on the silicon surface by pressure-controllable indentor. The effect of SiO2 layer on the shrinkage of pregrown OSF generated by the proposed method has been investigated using the samples with or without SiO2 layer. From the experimental data, we suggest a model for the shrinkage of OSF, which is based on the recombinaiton mechanism between silicon interstitial and vacancy at the Si-SiO2 interface.