• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.166-172
• /
• 2019

BACKGROUND: Increase in the ratio of small berries in blueberry production decreases the farmers' profits due to weakening market competitiveness and lowering harvest efficiency. One of the reasons for increased small berries is over fruit-load. For improving productivity and competitiveness of blueberry in Korea, hand-thinning can be applied to increase fruit quality before the developing adequate chemical thinning methods. This study was conducted to investigate the proper timing and methods for floral buds thinning in rabbiteye blueberry. METHODS AND RESULTS: Eight years old bushes of rabbiteye bluberries 'Brightwell' as a primary cultivar and 'Powderblue' as a pollinizer were used for this study. Fruit size distribution by leaf-to-fruit ratio was investigated by counting the number of leaves and fruits in canes of 127 'Brightwell' plants whose fruit set varied. Fifty percent of flowers/floral buds were removed in four different floral buds stages such as bud swell, late pink bud, full bloom, and petal fall, and the consumed time for thinning and fruit characteristics were recorded to investigate the effect and proper timing of floral buds thinning. Fruit weight and soluble solids content tended to increase in proportion to leaf-to-fruit ratio and the production of the number of fruits less than 13 mm in diameter decreased when leaf-to-fruit ratio was more than 2.5. Manual floral buds thinning by hands was fastest in full bloom stage and slowest in bud swelling stage. In all cultivars, fruit size was significantly smaller in non-thinning treatment than thinning, and there was, however, no significant difference in total fruit yield. The number of fruits less than 13 mm in diameter increased in both cultivars as floral buds thinning was delayed. Consumed time for picking 90% berries out of total berries per bush was shortest in full bloom stage thinning in 'Brightwell' and bud swelling, full bloom thinning in 'Powderblue'. These were 25 and 20 days faster than no thinning, respectively. CONCLUSION: Although the effect of floral buds thinning varied depending on the cultivars, our results confirmed that floral buds thinning was effective for the early intensive harvesting and the increase of the large fruit ratio and the harvesting productivity. Also, in order to increase thinning efficiency, it is recommended to remove the flower buds before the full bloom stage.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.203-210
• /
• 2019

Purpose: The purpose of this study was to verify the effect of the abutment superimposition process on the final virtual model in the scanning process of single and 3-units bridge model using a dental model scanner. Materials and methods: A gypsum model for single and 3-unit bridges was manufactured for evaluating. And working casts with removable dies were made using Pindex system. A dental model scanner (3Shape E1 scanner) was used to obtain CAD reference model (CRM) and CAD test model (CTM). The CRM was scanned without removing after dividing the abutments in the working cast. Then, CTM was scanned with separated from the divided abutments and superimposed on the CRM (n=20). Finally, three-dimensional analysis software (Geomagic control X) was used to analyze the root mean square (RMS) and Mann-Whitney U test was used for statistical analysis (${\alpha}=.05$). Results: The RMS mean abutment for single full crown preparation was $10.93{\mu}m$ and the RMS average abutment for 3 unit bridge preparation was $6.9{\mu}m$. The RMS mean of the two groups showed statistically significant differences (P<.001). In addition, errors of positive and negative of two groups averaged $9.83{\mu}m$, $-6.79{\mu}m$ and 3-units bridge abutment $6.22{\mu}m$, $-3.3{\mu}m$, respectively. The mean values of the errors of positive and negative of two groups were all statistically significantly lower in 3-unit bridge abutments (P<.001). Conclusion: Although the number of abutments increased during the scan process of the working cast with removable dies, the error due to the superimposition of abutments did not increase. There was also a significantly higher error in single abutments, but within the range of clinically acceptable scan accuracy.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.1
• /
• pp.38-46
• /
• 2019

BACKGROUND: Salinity is one of the main environmental stresses deteriorating qualities as well as yields of food crops. This study was conducted to identify the effects of salt stress on dry matter ratio, glucose content, and mineral content and composition in potatoes (Solanum tuberosum L.). METHODS AND RESULTS: Four potato varieties were grown in plastic pots (diameter 20 cm and height 25 cm) with three salinity levels (EC: 1.0, 4.0, and 8.0 dS/m) in a glasshouse. Dry matter ratio, specific gravity, starch, and glucose content in tubers harvested at 90 days after sowing were analyzed. Also, mineral contents (T-N, T-C, $P_2O_5$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Na^+$) in stem, leaf, and tuber were investigated and statistically analyzed for analysis of variance (ANOVA). Dry matter ratio, specific gravity, and starch content in tubers were reduced in all varieties as the salt concentration increased. Glucose content tended to decrease according to the salt concentration. In ANOVA analysis of mineral contents, there were significant differences in $K^+$ and $Mg^{2+}$ of leaf and stem, in $Na^+$ of leaf and tuber, and also in $Ca^{2+}$ of leaf by the interactions of variety and salinity. In the case of $K^+/Na^+$ and $Ca^{2+}/Na^+$, the stem was more sensitively influenced by the salt treatment than the leaf or the tuber. The $K^+/Na^+$ and $Ca^{2+}/Na^+$ decreased in leaf, stem, and tuber of four varieties, as the salt concentration became higher. The decreasing level varied according to the varieties. 'Kroda' and 'Duback' maintained relatively higher $K^+/Na^+$ and $Ca^{2+}/Na^+$ than 'Atlantic' or 'Goun' under the salt stress conditions. CONCLUSION: The composition and accumulation of minerals in potato plant as well as dry matter ratio, starch, and glucose contents were significantly influenced by salt stress. The respond patterns were different depending on the varieties and it was related to the salt tolerance among varieties.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.23-41
• /
• 2019

Smart Factory is different from existing factory automation in that it aims to produce personalized products with minimum time and cost through ICT. However, previous researches, not from consumers but from product suppliers, have focused on technology trends and technology application methods. In order for Smart Factory to be successful, it must go beyond supplier-focus to meet the needs of consumers. In this study, we surveyed the purchase intention of the personalized product manufactured by smart factory. Influencing factors of purchase intention were drawn as consumers' need for uniqueness, innovativeness, need for touch, and privacy concern, based on previous research. As results of data analysis, it was confirmed that respondents were willing to purchase personalized products, and that consumers' need for uniqueness, innovativeness, and need for touch had a significant impact on purchase intention of personalized products. Our findings can be summarized as follows. First, Consumers' need for uniqueness was found to have positive effects(${\beta}=0.168$) on purchase intention of personalized products. The desire to differentiate themselves from others will be reflected in their personalized products. Therefore, consumers with a higher desire for uniqueness tend to be more willing to purchase personalized products. Second, consumer innovativeness was found to have positive effects(${\beta}=0.233$) on purchase intention of personalized products. Personalized shoes suggested in this study is a new type of personalized product that is manufactured by the latest information and communication technologies such as multi-function robots and 3D printing. Therefore, consumers seeking innovative new experiences are more willing to purchase personalized products. Third, need for touch was found to have positive effects(${\beta}=0.299$) on purchase intention of personalized products. In a smart factory environment, prosuming participation is given to consumers. If consumers participate in the product development process and reflect their requirements on the product, they are expected to increase their purchase intention by virtually satisfying the need for touch. Fourth, privacy concern was found to have no significantly related to purchase intention of personalized products. This is interpreted as a willingness to tolerate the risk of exposing personal information such as home address, telephone number, body size, and preference for consumers who feel highly useful in personalized products.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in $34^{\circ}C$ distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE $L^*a^*b^*$ color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in $34^{\circ}C$ distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ${\Delta}E$ values compared to PoGo and control group (P < 0.05). The ${\Delta}E$ values of polished group showed the significantly lower than the ${\Delta}E$ values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ${\Delta}E$ values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ${\Delta}E$ values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.225-268
• /
• 2011

The general public are interested in the politics and form public opinion and keep in check the government for true democracy. The general public have the right to be furnished information from the government. And the government should enact the Freedom of Information Act to provide the public's right to know. At the same time, the government should enact the Data Protection Act to provide the public's right to privacy. There is a friction between the Freedom of Information Act and the Data Protection Act. It's hard to maintain the proper balance between the Freedom of information Act and the Data Protection Act, but many countries try to do so. The UK enacted the Data Protection Act 1998(DPA), which entered into force on 2000, to comply with EU Directive 1995. The Freedom of Information Act 2000(FOI), which came fully into force on 2005, was passed in 2000. The FOI imposes significant duties and responsibilities on public authorities to give access to the information they hold. The purpose of this study is to consider the provisions of the personal data in FOI and DPA. Besides this, it identifies the complaint cases on public authorities about the disclosure and exemption of the personal data in comparison with the acts. If information is the personal data of the person making the request, it will disclose under the DPA. If information is the personal data of a third party, it will disclose under the FOI. These acts interact each other to make up for the weak points in the other to make a proper application of the act on public authorities. This study may have any limitation in making a comparative study of the disclosure and exemption of the personal data in Korea. But it is expected to provide a basis for understanding the disclosure and exemption of the personal data in the UK.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.38-61
• /
• 2019

Up until the early twentieth century in Germany, there were two research trends: 1) emphasizing objectives and making detailed observations of archaeological artifacts and sites, 2) tracing the remains of specific nations or ethnic groups and defining their temporal-spatial boundaries by conducting research on material culture in terms of nationalism or ethnocentrism. After the Second World War ended and Germany was divided, West German archaeology focused on observations of artifacts and sites, cataloging them, and doing research on chronology and distribution following their own traditional methodologies. East German archaeology attempted to prove the developing process of history and its Marxist principles based upon material culture and to examine the historic value of inherent specific cultural heritage based on criteria regarding how it corresponded to socialism and contributed to the development of socialism. Nevertheless, East and West German archaeology shared traditional archaeological methods inherited from German archaeology since the nineteenth century, and contact between archaeologists in West and East Germany continued to a degree. Furthermore, East German archaeology produced significant archaeological achievements acknowledged by West German and European archaeologists. These facts provided the momentum to complete rapid incorporation of the archaeologies of West and East Germany in spite of a one-sided process imposed by West German archaeology. In the case of Korea, it seems necessary to make an effort to share common research history and traditions and to encourage mutual academic exchange (e.g. joint excavation and archaeological research). Furthermore, it is also imperative to have open-minded attitudes toward accepting substantial results and interpretations achieved by North Korean archaeologists under scrutiny when and where necessary, despite seeming to have been fossilized by Marxism and Juche ideology. Any efforts to narrow the gap in archaeological research and conservation of cultural heritage between the archaeologies of South and North Korea should be made immediately. The case of Germany demonstrates how such a project could proceed efficaciously.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.347-358
• /
• 2019

Lambertian cloud model (Lambertian Cloud Model) is the simplified cloud model which is used to effectively retrieve the vertical ozone distribution of the atmosphere where the clouds exist. By using the Lambertian cloud model, the optical characteristics of clouds required for radiative transfer simulation are parametrized by Optical Centroid Cloud Pressure (OCCP) and Effective Cloud Fraction (ECF), and the accuracy of each parameter greatly affects the radiation simulation accuracy. However, it is very difficult to generalize the vertical ozone error due to the OCCP error because it varies depending on the radiation environment and algorithm setting. In addition, it is also difficult to analyze the effect of OCCP error because it is mixed with other errors that occur in the vertical ozone calculation process. This study analyzed the ozone retrieval error due to OCCP error using two methods. First, we simulated the impact of OCCP error on ozone retrieval based on Optimal Estimation. Using LIDORT radiation model, the radiation error due to the OCCP error is calculated. In order to convert the radiation error to the ozone calculation error, the radiation error is assigned to the conversion equation of the optimal estimation method. The results show that when the OCCP error occurs by 100 hPa, the total ozone is overestimated by 2.7%. Second, a case analysis is carried out to find the ozone retrieval error due to OCCP error. For the case analysis, the ozone retrieval error is simulated assuming OCCP error and compared with the ozone error in the case of PROFOZ 2005-2006, an OMI ozone profile product. In order to define the ozone error in the case, we assumed an ideal assumption. Considering albedo, and the horizontal change of ozone for satisfying the assumption, the 49 cases are selected. As a result, 27 out of 49 cases(about 55%)showed a correlation of 0.5 or more. This result show that the error of OCCP has a significant influence on the accuracy of ozone profile calculation.

• Phonetics and Speech Sciences
• /
• v.11 no.1
• /
• pp.9-18
• /
• 2019

The purpose of this study is to determine whether the mean fundamental frequency (F0) changes depending on language, task, or language proficiency for Korean-English bilinguals. A total of forty-eight Korean-English speakers (28 balanced bilinguals and 20 Korean dominant bilinguals) participated in the study. Participants were asked to read aloud two types of tasks in English and Korean. For statistical analyses, the language ${\times}$ task two-way repeated ANOVAs were conducted within the balanced bilingual group first, and then group ${\times}$ language two-way mixed ANOVAs. The results showed that the females in both bilingual groups changed their mean F0 depending on the language they used and the tasks (p<.05), whereas no significant results were found in the males in either group under any conditions. The mean fundamental frequency in the Korean reading task was significantly higher than that in the English reading task for females in both balanced and Korean dominant bilingual groups. Thus, changes in mean F0 depending on language and context may reflect gender-specific characteristics, and females seem to be more sensitive to the socio-cultural standards that are imposed on them.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.40-49
• /
• 2019

Coarse woody debris (CWD), which is a component of the forest ecosystem, plays a major role in forest energy flow and nutrient cycling. In particular, CWD isolates carbon for a long time and is important in terms of slowing the rate of carbon released from the forest to the atmosphere. Therefore, this study measured the physiochemical characteristics and respiration rate ($R_{CWD}$) of CWD for Larix kaempferi and Pinus rigida in temperate forests in central Korea. In summer 2018, CWD samples from decay class (DC) I to IV were collected in the 14 forest stands. $R_{CWD}$ and physiochemical characteristics were measured using a closed chamber with a portable carbon dioxide sensor in the laboratory. In both species, as CWD decomposition progressed, the density ($D_{CWD}$) of the CWD decreased while the water content ($WC_{CWD}$) increased. Furthermore, the carbon concentrations did not significantly differ by DC, whereas the nitrogen concentration significantly increased and the C/N ratio decreased. The respiration rate of L. kaempferi CWD increased significantly up to DC IV, but for P. rigida it increased to DC II and then unchanged for DC II-IV. Accordingly, except for carbon concentration, all the measured characteristics showed a significant correlation with $R_{CWD}$. Multiple linear regression showed that $WC_{CWD}$ was the most influential factor on $R_{CWD}$. $WC_{CWD}$ affects $R_{CWD}$ by increasing microbial activity and is closely related to complex environmental factors such as temperature and light conditions. Therefore, it is necessary to study their correlation and estimate the time-series pattern of CWD moisture.