• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.305-310
• /
• 2015

In this paper, a wireless spectrum sensing receiver system is proposed. While a conventional Cognitive Radio(CR) system utilizes frequency down-conversion and demodulation to recognize wireless spectral signal, the proposed one is able to recover and sense valid signal at an RF front-end. It has been designed with a super-regeneration type circuit with a channel selectivity and variability for FDM applications with which a conventional single-channel super-regeneration circuit could not provide. From experimental evaluation, the implemented system has been optimized for channel allocation with quenching signal, and verified for 5 MHz-channel spacing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2427-2432
• /
• 2009

This paper proposes an monitoring system of elder and feeble person's motion activity using an object's motion activity data. The proposed system used wireless 3-axis sensor module, product by Freescale(Wireless Sensing Triple Axis Reference Design Board (ZSTAR)). We distribute sensing data into three classes using Neural Network System SVM. We find performance of proposed system that simulate some case about walk, past walk, fallen. Classify result data and graph of sensing data present succes rate 80%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.565-568
• /
• 2009

This paper proposes an monitoring system of elder and feeble person's motion activity using an object's motion activity data. The proposed system used wireless 3-axis sensor module, product by Freescale(Wireless Sensing Triple Axis Reference Design Board (ZSTAR)). We distribute sensing data into three classes using Neural Network System SVM. We find performance of proposed system that simulate some case about walk, past walk, fallen. Classify result data and graph of sensing data present succes rate 80%.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.462-467
• /
• 1999

In this paper, very high performance millimeter-wave radiometer of 92 GHz is presented. Radiometer system design, brightness temperature measurement and calibration methods are described. The architecture of radiometer including data acquisition, storage and digital signal processing using a notebook computer are explained and some experimental data in the laboratory are introduced. The system noise figure and total gain of implemented radiometer are 12 dB and 56 dB, respectively. The system stability is evaluated from the experiment. The difference of the detector output voltage for two targets, whose brightness temperature are 80 K and 300K, is 4 mV. The mechanical scanning method is considered to get a brightness temperature Image of the earth surface scene.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.266-269
• /
• 2008

Urban is more intelligent continuously with the help of the convergence with IT technology. And it requires an integrated control system, which can manage urban facilities or monitor large-scale events based on GIS data, to provide its citizen with various ubiquitous services such as u-Health, u-Traffic, context-awareness etc. In order to realize the intelligent city geo-sensors that have the functionalities of generic sensing as well as location awareness will be established everywhere in the near future. Our system we presented have a rule engine to handle a atomic event as well as complex events that contain control flow or branch among them. And it can allow for visualization and monitoring the results through KML (Keyhole Mark-up Language) in the Google Maps. This paper describes au-GIS event processing system that can deal effectively with u-GIS events coming from various geo-sensor data in ubiquitous computing environments.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.61-69
• /
• 2003

In this paper, we developed the U parameter test system which inspects the property of DC parameter for semiconductor products. The developed system is interfaced by IBM-PC. It is consisted of CPLD part, ADC (Analogue to Digital Converter), DAC (Digital to Analogue Converter), voltage/current source, variable resistor and measurement part. In the proposed system, we have designed the constant voltage source and the constant current source in a part. The CPLD part is designed by VHBL, which it generates the control and converts the serial data to parallel data. The proposed system has two test channels and it operates VFCS mode and CFVS mode. The range of test voltage is from 0[V] to 100[V], and the range of test current is from 0[mA] to 100[mA)]. The diode is tested. The test results have a good performance.

• Science of Emotion and Sensibility
• /
• v.21 no.3
• /
• pp.165-176
• /
• 2018

The objective of this study was to develop clothing-type wearable motion sensing and feedback systems to enhance children's sports by promoting visual and audio feedback. In this study, several applications, such as fabric sensors, sportswear integrated with various types of fabric sensors, and fabric-based motion sensing module design, as well as a visual and audio feedback system for gaining a better understanding of a child's interest in a type of exercise, were developed. An SWCNT-based stretchable fabric sensor was developed for motion sensing, and sportswear was designed using the fabric sensor that was integrated into the limbs of the garment. The sensing module was developed, and sensory performance was evaluated through a joint motion experiment for children. In addition, using the feedback system that was developed in the form of an accessory, the responses of light and sound were also examined based on the movement of the child who was wearing the sportswear prototypes. This study focused on the development and assessment of prototype designs for children's sportswear and accessory products that can help to ascertain a child's interest in a particular exercise.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.388-394
• /
• 2021

The conventional microelectromechanical system (MEMS) process has been used to fabricate sensors with high costs and high-volume productions. Emerging 3D printing can utilize various materials and quickly fabricate a product using low-cost equipment rather than traditional manufacturing processes. 3D printing also can produce the sensor using various materials and design its sensing structure with freely optimized shapes. Hence, 3D printing is expected to be a new technology that can produce sensors on-site and respond to on-demand demand by combining it with open platform technology. Therefore, this paper reviews three standard 3D printing technologies, such as Fused Deposition Modeling (FDM), Direct Ink Writing (DIW), and Digital Light Processing (DLP), which can apply to the sensor fabrication process. The review focuses on strain/load sensors having both sensing material features and structural features as well. NCPC (Nano Carbon Piezoresistive Composite) is also introduced as a promising 3D material due to its favorable sensing characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1062-1068
• /
• 2007

In order to design and develop a ubiquitous game, it is necessary to develop a natural and flexible interface between the real world and the virtual world, based on social and physical context awareness. We design user interface model and the tactile sensing system that performs virtual interaction and collection of the sensor data. It is sensitive so the collected data should be filtered, rearranged and analyzed. This information is quite different from stylus input, keyboard, button or mouse for interaction. We detect kicked 3D force position of a ball, moment of area, moment of inertia and modified ball shape using tactile sensing system and analyzed data. The results demonstrate that the proposed approach is desirable and robust as well as the results can be used realistic actions and reactions considering attack force and to make interesting environments for ubiquitous game.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.779-782
• /
• 1991

The design of a control language of mobile robot system for autonomous operations is explained in this paper. The on-board controller consists of one-chip microcontrollerbased system and communicates with the host computer. It decodes the received commands and controls the mobile robot. The control language is basically of interpreter type and is consisted of motion primitives and sensing primitives. The combinations of primitives are constructed for mobile robot operations.