• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.96-105
• /
• 2011

Ubiquitos sensor network(USN) is a technology which is widely used in our life. This paper introduces an example of design and implementation for a system which is based on the USN technology and can provide an efficient management tool for a space that should be precisely controlled for a certain range of uniformity in temperature and humidity. This introduced system builds a wireless sensor network using a number of sensor modules that are equipped with temperature and humidity sensors, and collects temperature and humidity information in real-time while simultaneously providing a method for monitoring the status of temperature and humidity by the graphical user interface. Also, the system will give a warning signal if the monitored values are differ from the pre-specified values of temperature and humidity for each sensor module more than a certain amount of tolerance. This temperature and humidity logging and monitoring system can perform better management for the space easily and efficiently by automating the existing manual method for data collection and management. Furthermore, using the stored data, it can make possible to perform post-analysis on the problems caused by temperature and humidity and to obtain information for environmental enhancement for the space.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.128-136
• /
• 2011

To monitor and predict the change of coastal environment according to the construction of Saemangeum sea dyke and the development of land reclamation, we have done real-time and periodic ocean observation and numerical simulation since 2002. Saemangeum coastal environmental data can be largely classified to marine meteorology, ocean physics and circulation, water quality, marine geology and marine ecosystem and each part of data has been generated continuously and accumulated over about 10 years. The collected coastal environmental data are huge amounts of heterogeneous dataset and have some characteristics of multi-dimension, multivariate and spatio-temporal distribution. Thus the implementation of information system possible to data collection, processing, management and service is necessary. In this study, through the implementation of Saemangeum coastal environmental information system using geographic information system, it enables the integral data collection and management and the data querying and analysis of enormous and high-complexity data through the design of intuitive and effective web user interface and scientific data visualization using statistical graphs and thematic cartography. Furthermore, through the quantitative analysis of trend changed over long-term by the geo-spatial analysis with geo- processing, it's being used as a tool for provide a scientific basis for sustainable development and decision support in Saemangeum coast. Moreover, for the effective web-based information service, multi-level map cache, multi-layer architecture and geospatial database were implemented together.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.261-269
• /
• 2017

The purpose of this paper is to provide a search system using a method of accessing the web in real time without using a database server in order to guarantee the up-to-date information in a single network, rather than using a plurality of bots connected by a wide area network Design. The method of the research is to design and analyze the system which can search the person and keyword quickly and accurately in crepe system. In the crepe server, when the user registers information, the body tag matching conversion process stores all the information as it is, since various styles are applied to each user, such as a font, a font size, and a color. The crepe server does not cause a problem of body tag matching. However, when executing the crepe retrieval system, the style and characteristics of users can not be formalized. This problem can be solved by using the html_img_parser function and the Go language html parser package. By applying queues and multiple threads to a general-purpose web crawler, rather than a web crawler design that targets a specific site, it is possible to utilize a multiplier that quickly and efficiently searches and collects various web sites in various applications.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.3
• /
• pp.279-286
• /
• 2015

The rapid increase of the current marine accidents is mainly due to the human execution errors. In an effort to address this, various kinds of researches such as construction of the digital vessels and vessel information monitoring systems have been conducted. But for safe navigation of vessels, it lack on systems study which can efficiently store, utilize and manage the mass data accepted by the vessel. In this paper, we propose a VWS(Virtual World System) that is based on the architecture of intelligent systems RVC(Reactive Layer-Virtual World-Considerative Layer) model of intelligent autonomous navigation system. VWS is responsible to store all the necessary information for safe navigation of the vessel and the information services to the sub-system of intelligent autonomous navigation system. VWS uses topology database to express the specific problem area, and utilizes a scheduling to reflect the characteristics of the real-time processing environment. Also, Virtual World defines API for the system to reflect the characteristics of the distributed processing environment. As a case study, the VWS is applied to a intelligent ship autonomous navigation system, and simulation is done to prove the effectiveness of the proposed system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1D
• /
• pp.13-22
• /
• 2012

The 119 emergency rescue-aid service operated by Korean government is a very valuable in a society and its importance is growing in Korea as an aging society. Especially, the emergency vehicle's arrival time to accidents place is an important variable which affects initial emergency measure for patients and it depends on the road network attributes, such as emergency service station's location, accessibility to accidents place and so on. This study aims to analysis the emergency vehicles' arrival delay and the dispatch station in the viewpoint of efficiency utilizing the real rescue-aid activity data. We analyzed the dispatch distribution of the emergency rescue-aid service at first. And we analyzed high accident rate locations not involved in the fixed radius of rescue-aid service stations and display GIS map showing regions have been delayed. The input data of the road network speed is based on the KTDB (Korea Transportation Database) and historical rescue-aid data is from Gyeongsangbuk-do's fire service headquarters.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.211-215
• /
• 2013

Partial discharge diagnosis techniques using ultra high frequencies do not affect load movement, because there is no interruption of power. Consequently, these techniques are popular among the prevention diagnosis methods. For the first time, this measurement technique has been applied to the GIS, and has been tested by applying an extra high voltage switchboard. This particular technique makes it easy to measure in the live state, and is not affected by the noise generated by analyzing the causes of faults ? thereby making risk analysis possible. It is reported that the analysis data and the evaluation of the risk level are improved, especially for poor location, and that the measurement of Ultra high frequency (UHF) partial discharge of the real live wire in industrial switchgear is spectacular. Partial discharge diagnosis techniques by using the Ultra High Frequency sensor have been recently highlighted, and it is verified by applying them to the GIS. This has become one of the new and various power equipment techniques. Diagnosis using a UHF sensor is easy to measure, and waveform analysis is already standardized, due to numerous past case experiments. This technique is currently active in research and development, and commercialization is becoming a reality. Another aspect of this technique is that it can determine the occurrences and types of partial discharge, by the application diagnosis for live wire of ultra high voltage switchgear. Measured data by using the UHF partial discharge techniques for ultra high voltage switchgear was obtained from 200 places in Gumi, Yeosu, Taiwan and China's semiconductor plants, and also the partial discharge signals at 15 other places were found. It was confirmed that the partial discharge signal was destroyed by improving the work of junction bolt tightening check, and the cable head reinforcement insulation at 8 places with a possibility for preventing the interruption of service. Also, it was confirmed that the UHF partial discharge measurement techniques are also a prevention diagnosis method in actual industrial sites. The measured field data and the usage of the research for risk assessment techniques of the live wire status of power equipment make a valuable database for future improvements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.9-18
• /
• 2020

Recently, studies of integrated management platform and performance-based maintenance decision-marking systems have proceeded to the efficient management of port facilities. The purpose of this study was to manage and operate port facilities based on performance and to provide long-term durability and budgetary execution. Thus, it is essential to secure basic data to be analyzed in an integrated platform and decision-marking system. This study derived the data linkage measures to secure port facility design and management information. The target of deriving the data linkage was the POMS (Port Facility Management System) currently in operation by the MOF (Ministry of Oceans and Fisheries). To derive data linkage, analyze the database of POMS and select the data required for the operation-integrated platform and decision-marking system. The final data linkage target was determined by compiling the requirements of the relevant experts and selecting the final target of three groups (port and facility information, management information, and user information). As a result, the API interface design was prepared for detailed linked data and data linkage framework between the linkage data of POMS. The provision of real-time data linkage between POMS and integrated platform is expected to improve the operational efficiency of the integrated platform.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.189-204
• /
• 2018

This study has developed a forest fire occurrence probability model for inaccessible areas such as North Korea and Demilitarized Zone and we have developed a real-time forest fire danger rating system that can be used in fire-related works. There are limitations on the research that it is impossible to conduct site investigation for data acquisition and verification for forest fire weather index model and system development. To solve this problem, we estimated the fire spots in the areas where access is impossible by using MODIS satellite data with scientific basis. Using the past meteorological reanalysis data(5㎞ resolution) produced by the Korea Meteorological Administration(KMA) on the extracted fires, the meteorological characteristics of the fires were extracted and made database. The meteorological factors extracted from the forest fire ignition points in the inaccessible areas are statistically correlated with the forest fire occurrence and the weather factors and the logistic regression model that can estimate the forest fires occurrence(fires 1 and non-fores 0). And used to calculate the forest fire weather index(FWI). The results of the statistical analysis show that the logistic models(p<0.01) strongly depends on maximum temperature, minimum relative humidity, effective humidity and average wind speed. The logistic regression model constructed in this study showed a relatively high accuracy of 66%. These findings may be beneficial to the policy makers in Republic of Korea(ROK) and Democratic People's Republic of Korea(DPRK) for the prevention of forest fires.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.55-64
• /
• 2017

In this paper, we propose and implement an IoT based mobile smart monitoring system in the view point of safety inspection for solar power generation. The main features and contributions of proposed system are as follows. First, the proposed system model can evaluate periodically in the view point of safety inspection the conditions of the system and structure of solar power generation. Second, the proposed system automatically re-processes the measurement data of the system and structure for solar power generation and save it into database. Third, using the re-processed and saved information, the proposed system can provide the monitoring information with webpage form to both administrator and owner of solar power generation system, thus they can measure and confirm directly in the view point of safety inspection the conditions of the solar generation structure without visiting those places. Fourth, the provided web pages for the monitoring of solar power generation can be accessed regardless of the system structures. The performance evaluations of the proposed system show that the proposed monitoring system can save efficiently the data received from the sensors installed in the structure of solar power generation into the data base in the collecting server. And the proposed system can support that both administrator and user of solar power generation system access webpage in real time without considering places by using mobile phone and desktop computer and obtain the information for the conditions of the system and structure of solar power generation with graph forms.

• Journal of Internet Computing and Services
• /
• v.18 no.4
• /
• pp.43-50
• /
• 2017

Embedded System includes touch, GPS, motion, and acceleration sensor, and can communicate with neighbor devices using wireless communication. Because Arduino with embedded system provides good environment for development and application, developers, engineers, designers, as well as artists, students have a great interest. They utilize Arduino in the robot, home appliances, fashion, culture and so on. In this paper, we design and implement a game using Arduino with embedded system which recognizes the human movement by moving away from one-dimensional game of the existing touch method. Implemented embedded system game measures gyro-sensor to recognize human movement and detects the attack success of the opponent by using touch sensor. Moreover, health of the game player is updated in the real time through the android phone-based database. In this paper, implemented embedded system-based game provides GUI screen of android phone. It is possible to select watching mode and competition mode. Also, it has low energy consumption and easy to expand because it send and receive data packet through recent Bluetooth communication.