• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.271-277
• /
• 2012

Dimensions, operation conditions and improvement items for round roof windows were investigated in arch shape single-span plastic greenhouse with roof vents, and natural ventilation performance was analyzed based on the ventilation theory. Diameter of round roof windows was mostly 60 cm, and chimney height projected on roof was average 30 cm. Installation space was mostly 5 to 6 m but farmhouse of 10 m and over was 16.7% also. A round roof window which has 60 cm diameter was installed to 6 m space generally and 80 cm diameter was installed to 10 m space, but correct standards did not exist. There were a lot of opinions that ventilation effect of round roof windows is fairly good and user satisfaction is generally excellent. It is problem that there is few effects in summer and that vinyl around each vent tears well and rainwater leaks, and improvement hope item required development of automatic control system. In the wind speed of 0.3 m/s, it was estimated that natural ventilation rates were 0.69, 0.55, 0.50 and 0.48 volumes per minute in case of 2, 4, 6 and 8 m installation space for round roof windows, respectively. It was analyzed that the ratio of ventilation due to buoyancy out of total ventilation were 65.2, 41.9, 29.9 and 22.8% in case of 2, 4, 6 and 8m installation space, respectively. By the round roof windows installed at space of 6 m, ventilation rate was estimated to 0.5 volumes per minute, and we can expect the increase in ventilation rate of 30%. In order to meet the recommended ventilation rate for summer season, we have to install the round roof windows at space of 1 to 2 m. However, it is difficult to apply those installation space because of falling productivity due to lower light transmittance as well as rising costs. It is estimated that the installation space of 6m is appropriate for spring or fall season. Therefore it is necessary to encourage installing the roof windows in single-span plastic greenhouses.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.535-541
• /
• 2008

As the concurrent engineering concept has emerged along with the support of optimization techniques, lots of endeavors have been made to apply optimization techniques to actual design problems for a holistic decision. Even if the range of design problems which the optimization is applicable to has been extended, most of ship designs still remain in an iterative approach due to the difficulties of seamless integration of all related design activities. In this approach, an entire design problem is divided into many sub-problems and carried out by many different disciplines through complicated internal interactions. This paper focuses on preliminary ship design process. This paper proposes a process centric integrated framework as the first step to establish a workflow based design process management system. The framework consists of two parts; a schedule management part to support a manager to monitor current progress status and adjust current schedule, and a process management part to assist a design to effectively perform a series of design activities by following a predefined procedure. Overall system are decomposed into modules according to the target to be managed in each module. Appropriate interactions between the decomposed modules are designed to achieve a consistency of the entire system. Design process model is also designed on a thorough analysis of actual ship design practice. The proposed framework will be embodied using a commercial workflow package.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.2
• /
• pp.30-36
• /
• 2000

The hidden node plays a role of the functional units that classifies the features of input pattern in the given question. Therefore, a neural network that consists of the number of a suitable optimum hidden node has be on the rise as a factor that has an important effect upon a result. However there is a problem that decides the number of hidden nodes based on back-propagation learning algorithm. If the number of hidden nodes is designated very small perfect learning is not done because the input pattern given cannot be classified enough. On the other hand, if designated a lot, overfitting occurs due to the unnecessary execution of operation and extravagance of memory point. So, the recognition rate is been law and the generality is fallen. Therefore, this paper suggests a method that decides the number of neural network node with feature information consisted of the parameter of learning algorithm. It excludes a node in the Pruning target, that has a maximum value among the feature value obtained and compares the average of the rest of hidden node feature value with the feature value of each hidden node, and then would like to improve the learning speed of neural network deciding the optimum structure of the multi-layer neural network as pruning the hidden node that has the feature value smaller than the average.

• Journal of the Korean Chemical Society
• /
• v.45 no.3
• /
• pp.256-263
• /
• 2001

The STS contents, emphasized in the 6th curriculum, in the chemistry parts of general science textbooks were analyzed. The STS contents of textbooks showed average of 24.4%. The chapter in "modern science and technology" were included 45.5% in STS contents, 38.7% in "environment", 29.1% in energy, and 14.0% in "materials". When the STS contents were analyzed by STS topics of Piel, the results are as follows; 38.3% on environmental quality and utilization of natural source, 29.6% on effect of technological developments, 7.9% on energy, and 0.6% on human engineering. However, there were no topics on population, space research and national defense. When the STS contents were analyzed by student activities of SATIS, most of the activities were research and case study. There were few field activities of role play, problem solving and decision making, and research design.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.2
• /
• pp.151-164
• /
• 2001

Java, used as the most representative object-oriented language, isil becoming the popular language for Internet/Intranet based program development. Moreover, it is used for development language in a variety of areas such as component based development language. In the view of reuse and maintenance of developed program, quality evaluation of program is becoming a more important issue. So, metrics measurement for quality evaluation of program that is developed at present including existing Java application is necessary. However, it is necessary that whether existing object-oriented software metrics is suitable on Java program is to be validated So, in this paper, we build an automated metrics measurement system that needs to validate on object-oriented software metrics and wish to support metrics measurement that is to determine it. The purpose of this system is to support a precise quality evaluation tool. In this system, we apply the metrics classified by Briand. Briand classified the metrics by formalizing mathematically them to verify feasibility of existing object-oriented software metrics. Using the proposed system, we can make comparison and analysis of validation on existing object-oriented metrics by calculating quantitative information more rapidly from Java source program. If there is any problem in feasibility of the metrics, we can establish a suitable metrics on Java program by considering reiJ,1forcement of the existing metrics or proposing new metrics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.3
• /
• pp.155-162
• /
• 2014

Using an isogeometric approach, a continuum-based shape design optimization method is developed for steady state power flow problems at high frequencies. In case the isogeometric method is employed to the shape design optimization, the NURBS basis functions used in CAD geometric modeling are directly utilized to embed the exact geometry into the computational framework so that the design parameterization for shape optimization is much easier than that in the finite element method and consequently provides the enhanced smoothness of design perturbations. Thus, exact geometric models can be used in both the response and the shape sensitivity analyses, where normal vector and curvature are continuous over the whole design space so that enhanced shape sensitivity can be expected. Through numerical examples, the developed isogeometric sensitivity is compared with finite difference one to provide excellent agreement. Also, it turns out that the proposed method works very well in the shape optimization problems.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.79-100
• /
• 2015

This study is to examine the factors that influence purchasing behavior and decision-making when consumers buy goods through mobile shopping, define purchasing decision-making with the steps of problem recognition, information search, alternative assessment, and purchasing behavior to understand mobile consumer behavior, and investigate how the factors of each step play roles and influence consumers' purchasing decision-making through positive analysis to figure out consumer purchasing behavior in mobile shopping. The study results, First, the user characteristics of information search influence flow. Second, in the relations between the user characteristics in the step of information search and perceived risk in alternative assessment, if recognition on gains is higher, perceived risk for time loss gets lower, and when the level of skills is higher, perceived risk gets higher, and it has been partly adopted that innovativeness does not influence risk perception. Third, in the relations between flow experience and purchasing intention, it has been found to be partially significant that remote presence and challenge do not influence purchasing intention but do influence excitement, attention concentration, and control and also do influence perceived risk and purchasing intention. Fourth, according to the results of analyzing the difference of consumer purchasing behavior by the types of involvement, practical involvement and sensual involvement, user characteristics and flow, and perceived risk differ by the types of products in terms of the search process, thereby changing purchasing intention. Lastly, the significance and limitations of this study was discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.5
• /
• pp.324-333
• /
• 2013

Recently, rudder erosion due to cavitation has been frequently reported on a semi-spade rudder of a high-speed large ship. This problem raises economic and safety issues when operating ships. The semi-spade rudders have a gap between the horn/pintle and the movable wing part. Due to this gap, a discontinuous surface, cavitation phenomenon arises and results in unresolved problems such as rudder erosion. In this study, we made a rudder model for 2-D experiments using the NACA0020 and also manufactured gap flow blocking devices to insert to the gap of the model. In order to study the gap flow characteristics at various rudder deflection angles($5^{\circ}$, $10^{\circ}$, $35^{\circ}$) and the effect of the gap flow blocking devices, we carried out the velocity measurements using PIV(Particle Image Velocimetry) techniques and cavitation observation using high speed camera in Seoul National University cavitation tunnel. To observe the gap cavitation on a semi-spade rudder, we slowly lowered the inside pressure of the cavitation tunnel until cavitation occurred near the gap and then captured it using high-speed camera with the frame rate of 4300 fps(frame per second). During this procedure, cavitation numbers and the generated location were recorded, and these experimental data were compared with CFD results calculated by commercial code, Fluent. When we use gap flow blocking device to block the gap, it showed a different flow character compared with previous observation without the device. With the device blocking the gap, the flow velocity increases on the suction side, while it decreases on the pressure side. Therefore, we can conclude that the gap flow blocking device results in a high lift-force effect. And we can also observe that the cavitation inception is delayed.

• Journal of Life Science
• /
• v.23 no.7
• /
• pp.879-885
• /
• 2013

Baby powder is an astringent powder used to prevent diaper rash. It also has other cosmetic uses. In general, it is composed of talc powder (talcum powder). Talc powder is harmful if inhaled because it can cause significant lung damage. With the aim of developing a new rice-based baby powder, three kinds of rice varieties were selected and pulverized. To determine the cost-effectiveness of the different states of rice powder, several milling processes were tried, and the powder characteristics of the resulting rice powder, such as particle size, biological activities, digitalized color value, and moisture content before and after coating treatment with essential oil and silicon oil, were examined. "Goami" showed good flour characteristics with respect to lightness (92.0, $L^*$[D65] value) and particle size ($8.9{\mu}m$). SEM analysis showed that the rice powder particles coated in the essential oil and silicon oil showed a smoother and rounder appearance than those of the talc powder. In addition, the average particle size was decreased by the essential oil and silicon oil coating. The silicon oil coating solved the problem of moisture absorption in rice flour. Rice flour properly coated with essential oil and silicon oil shows great potential as a new material source of powder.

• Journal of Gifted/Talented Education
• /
• v.26 no.1
• /
• pp.211-230
• /
• 2016

The study aimed to investigate the characteristics of algebraic thinking of the mathematically gifted students and search for how to teach algebraic thinking. Research subjects in this study included 93 students who applied for a science gifted education center affiliated with a university in 2015 and previously experienced gifted education. Students' responses on an algebraic item of a creative thinking test in mathematics, which was given as screening process for admission were collected as data. A framework of algebraic thinking factors were extracted from literature review and utilized for data analysis. It was found that students showed difficulty in quantitative reasoning between two quantities and tendency to find solutions regarding equations as problem solving tools. In this process, students tended to concentrate variables on unknown place holders and to had difficulty understanding various meanings of variables. Some of students generated errors about algebraic concepts. In conclusions, it is recommended that functional thinking including such as generalizing and reasoning the relation among changing quantities is extended, procedural as well as structural aspects of algebraic expressions are emphasized, various situations to learn variables are given, and activities constructing variables on their own are strengthened for improving gifted students' learning and teaching algebra.