• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.767-768
• /
• 2006

In this study, copper vapor chambers with built-in cooling fins, which eliminated the soldered or brazed joints in the conventional vapor chamber, were fabricated using the metal injection molding process. The results show that with optimized molding parameters, fins with an aspect ratio up to 18 could be produced. After sintering, the densities of the fin and chamber reached 96%. With only 32 cooling fins and a small fan installed, the thermal resistance of the heat sink was $1.156^{\circ}C/W$, and the power dissipation was 40W when the junction temperature was $70^{\circ}C$. When copper powder was sintered onto the chamber to make a vapor chamber, the thermal resistance decreased to $1.046^{\circ}C/W$.

• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.110-114
• /
• 2020

In this paper, a heat pump using a Peltier device was developed for heat dissipation in a sealed electric box. The heat pump was designed with a cooling fin attached to both sides of the Peltier device, and a fan was mounted on the cooling fin on the hot side to increase the efficiency. The heat dissipation efficiency could be improved by directly connecting the electronic component having high heat to the cooling fin using a heat conducting wire. The fabricated heat pump was designed to operate only in the temperature range set by the temperature control system to improve the problem of high power consumption of the Peltier element.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.145-151
• /
• 2004

본 논문은 WCDMA와 같은 IMT-2000 통신 시스템에서 핵심적으로 사용되고 있는 디지털 정합 필터(Digital Matched Filter)의 최적화된 구조를 제안한다. 제안된 구조는 256칩 Hierarchical Golay sequence를 이용한 기존의 부분 상관 구조를 바탕으로 하는 디지털 정합 필터에 비하여 소비전력과 회로면적을 최소화 하고 효율적인 초기동기채널의 포착을 이루도록 한다. 기존의 부분 상관형 디지털 정합 필터는 부분 상관 구조를 적용하지 않은 디지털 정합 필터보다 상관 연산기의 크기가 감소하나 플립플롭의 크기가 그 이상으로 증가하는 역효과가 발생한다. 본 논문에서는 라운딩 스텝 기법을 적용하여 플립플롭의 크기를 감소시킨 부분 상관형 디지털 정합 필터를 제안하며, 제안된 구조는 기존의 방법에 비하여 면적 및 소비전력이 45%이상 감소한다. 제안된 구조는 Xillinx FPGA를 이용하여 검증하였다.

• 대한전자공학회논문지SD
• /
• 제47권5호
• /
• pp.94-99
• /
• 2010

본 논문에서는 디지털 제어 발진기의 전력소모를 최적화하는 설계기법을 제안한다. 디지털 제어 발진기의 Coarse tuning 비트수와 Fine tuning 비트수를 조절하여 LSB Resolution, 주파수 범위, 선형성, 이식성에는 영향을 주지 않고 전력소모를 최적화한다. 이를 위해 제어 비트에 따른 디지털 제어 발진기의 전력소모 변화를 분석하였다. 본 논문에서는 0.13um 1.2V CMOS 라이브러리를 이용하여 제안한 설계기법을 적용한 경우와 그렇지 않은 경우를 모두 설계, 모의실험 및 검증하였다. 제안한 설계기법을 적용한 디지털 제어 발진기는 모의실험결과 283MHz부터 1.1GHz의 클록을 생성할 수 있으며, LSB Resolution은 1.7ps이다. 디지털 제어 발진기의 출력 주파수가 1GHz일 때 전력소모는 2.789mW이다.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.384-390
• /
• 2011

To evaluate the condition of stator winding insulation in generators that have been operated for a long period of time, diagnostic tests were performed on the stator bars of a 500 MW, 22 kV generator under accelerated thermal and electrical aging procedures. The tests included measurements of AC current (${\Delta}I$), dissipation factor ($tan{\delta}$), partial discharge (PD) magnitude, and capacitance (C). In addition, the AC current test was performed on the stator winding of a 350 MW, 24 kV generator under operation to confirm insulation deterioration. The values of ${\Delta}I$, ${\Delta}tan{\delta}$, and PD magnitude in one stator bar indicated serious insulation deterioration. In another stator bar, the ${\Delta}I$ measurements showed that the insulation was in good condition, whereas the values of ${\Delta}tan{\delta}$ and PD magnitude indicated an incipient stage of insulation deterioration. Measurements of ${\Delta}I$ and PD magnitude in all three phases (A, B, C) of the remaining generator stator windings showed that they were in good condition, although the ${\Delta}tan{\delta}$ measurements suggested that the condition of the insulation should be monitored carefully. Overall analysis of the results suggested that the generator stator windings were in good condition. The patterns of PD magnitude in all three phases (A, B, C) were attributed to internal discharge.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.830-840
• /
• 2015

The H-bridge inverter is the fundamental power cell of the cascaded distribution static synchronous compensator (DSTATCOM). Thus, cell reliability is important to the compensation performance and stability of the overall system. The concept of the power electronics building block (PEBB) is an ideal solution for the power cell design. In this paper, an H-bridge inverter-based “plug and play” HPEBB is introduced into the main circuit and the controller to improve the compensation performance and reliability of the device. The section that discusses the main circuit primarily emphasizes the design of electrical parameters, physical structure, and thermal dissipation. The section that presents the controller part focuses on the principle of complex programmable logic device -based universal controller This section also analyzes typical reliability and anti-interference issues. The function and reliability of HPEBB are verified by experiments that are conducted on an HPEBB test-bed and on a 10 kV/± 10 Mvar DSTATCOM industrial prototype.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.626-628
• /
• 2004

This paper describes an 8-bit CMOS folding A/D converter for set-top box. Modular low-power, high-speed CMOS A/D converter for embedded systems aims at design techniques for low-power, high-speed A/D converter processed by the standard CMOS technology. The time-interleaved A/D converter or flash A/D converter are not suitable for the low-power applications. The two-step or multi-step flash A/D converters need a high-speed SHA, which represents a tough task in high-speed analog circuit design. On the other hand, the folding A/D converter is suitable for the low-power, high-speed applications(Embedded system). The simulation results illustrate a conversion rate of 40MSamples/s and a Power dissipation of 80mW(only analog block) at 2.5V supply voltage.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.516-519
• /
• 2005

The pilot tidal current power plant is to be constructed at the Uldolmok between Chindo and Haenam, during next year. and extensive coastal engineering research works have been carried out. In this paper we describes some observation results of the tide and tidal current. as well as modeling work in order to investigate the tide and tidal current regime change in relation to the tidal current power plant (TCPP) construction. The special modeling skill in order to consider the turbine operation in the TCPP is developed and applied to the estimation for the flow regime change by the simple layout of the tidal current power plant.

• 신재생에너지
• /
• 제1권2호
• /
• pp.73-78
• /
• 2005

The pilot tidal current power plant is to be constructed at the Uldolmok between Chindo and Haenam, during next year, and extensive coastal engineering research works have been carried out. In this paper we describes some observation results of the tide and tidal current, as well as modeling work in order to investigate the tide and tidal current regime change In relation to the tidal current power plant [TCPP] construction. The special modeling skill in order to consider the turbine operation in the TCPP is developed and applied to the estimation for the flow regime change by the simple layout of the tidal current power plant.

• 전력전자학회논문지
• /
• 제7권4호
• /
• pp.313-321
• /
• 2002

영구자석 동기전동기의 제동 알고리듬을 제안한다. 전동기의 고정자 저항을 제동저항으로 사용함으로써 전동기의 운동에너지를 부가적인 제어회로 없이 고정자권선에서 소모한다. 제안된 제동 알고리듬은 고정자권선에서 전력소모를 최대화하고 DC 링크 콘덴서전압 제한 및 인버터 전류제한 조건하에서 최대의 제동토크를 발생하여 제동시간을 최소화 할 수 있다.