• 상하수도학회지
• /
• 제22권6호
• /
• pp.689-696
• /
• 2008

In a water treatment process a complete and homogeneous dispersion of the coagulants in the raw water could be most important factor. This research was performed to evaluate coagulation performance of the in-line-orifice mixer which was recently introduced as a rapid mixing device. The test was to determine the actual coagulant dispersion distribution on the overall cross-section at a distance of 1.6~3D from the chemical injection point by measuring zeta potential. From the results of zeta potential test, it was shown that the coagulant dispersion within the in-line orifice mixer was occurred very unevenly. The results have confirmed that it is necessary to increase the velocity of coagulants injection or pressurized water rates, in order to reduce nonuniform distribution of chemicals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.79-82
• /
• 1999

So far, The methods for identifying the parameters of some region or material have been developed. This paper describes a new method for electric resistivity reconstruction using multi-resolution property of wavelet. The outputs of the potential electrodes are computed using two dimensional FEM in the wave number space by Fourier transforming the governing equation. The resistance distribution in the region of interests, which makes the computed potential distribution coincide with the measured potential, is found by minimizing the objective function using an optimization method. Multi-resolution analysis introduced in this paper will be proved to be the proper method in the viewpoint of effectivity and time-consuming by the numerical results.

• 전산구조공학
• /
• 제10권1호
• /
• pp.159-171
• /
• 1997

본 연구에서는 구형 공동을 가진 횡 방향 등방성 매체(transversely isotropic medium)에 한 방향의 인장과 평면 전단력을 각각 가한 후의 응력 분포를 고찰하였다. 이 연구에서 사용된 접근방법은 이론적 해석과 수치해석적 고찰을 병행하였다. 이론적 해석방법은 1종, 2종 Legendre함수를 이용한 potential function에 기초하였고, 수치해석적 방법은 유한차분법을 이용하였다. 다섯가지 이방성 재료에 대하여 두가지 하중 조건에 의한 수치해석 결과가 제시되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1474-1475
• /
• 2006

This paper describes touch and step voltage in the reinforced concrete and steel poles. Ground surface potential rises were measured as a function of the separation between pole and ground rod. Touch and step voltage are calculated on the basis of the distribution of ground surface potential rises. As a result, touch and step voltages strongly depend on the position of installation of ground rod.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.655-661
• /
• 2014

In this paper, a new two dimensional (2D) analytical modeling and simulation for a surrounding gate tunnel field effect transistor (TFET) is proposed. The Parabolic approximation technique is used to solve the 2-D Poisson equation with suitable boundary conditions and analytical expressions for surface potential and electric field are derived. This electric field distribution is further used to calculate the tunneling generation rate and thus we numerically extract the tunneling current. The results show a significant improvement in on-current characteristics while short channel effects are greatly reduced. Effectiveness of the proposed model has been confirmed by comparing the analytical results with the TCAD simulation results.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.93-101
• /
• 2013

The object of this work is to establish an electrochemical noise(EN) measurement technique combined with a direct current potential drop(DCPD) method for monitoring of localized corrosion cracking of nickel-based alloy, and to analyze its mechanism. The electrochemical current and potential noises were measured under various conditions of applied stress to a compact tension specimen in a simulated primary water chemistry of a pressurized water reactor. The amplitude and frequency of the EN signals were evaluated in both time and frequency domains based on a shot noise theory, and then quantitatively analyzed using statistical Weibull distribution function. From the spectral analysis, the effect of the current application in DCPD was found to be effectively excluded from the EN signals generated from the localized corrosion cracking. With the aid of a microstructural analysis, the relationship between EN signals and the localized corrosion cracking mechanism was investigated by comparing the shape parameter of Weibull distribution of a mean time-to-failure.

• 한국정보통신학회논문지
• /
• 제17권6호
• /
• pp.1409-1413
• /
• 2013

본 연구에서는 이중게이트 MOSFET의 채널도핑농도의 변화에 따른 문턱전압이하 전류의 변화를 분석하였다. 이를 위하여 이중게이트 MOSFET의 채널 내 전위분포를 구하기 위하여 포아송방정식을 이용하였으며 이때 전하분포함수에 대하여 가우시안 함수를 사용하였다. 전위분포는 경계조건을 이용하여 채널크기에 따른 해석학적인 함수로 구하였다. 가우시안 함수의 변수인 이온주입범위 및 분포편차 그리고 채널도핑농도 등에 대하여 문턱전압 이하 전류 특성의 변화를 관찰하였다. 본 연구의 전위모델에 대한 타당성은 이미 기존에 발표된 논문에서 입증하였으며 본 연구에서는 이 모델을 이용하여 문턱전압이하 전류 특성을 분석하였다. 분석결과, 문턱전압이하 전류는 채널도핑농도 및 가우시안 분포함수의 변수 등에 크게 영향을 받는 것을 관찰할 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권4호
• /
• pp.287-298
• /
• 2007

A two-dimensional treatment of the potential distribution under the depletion approximation is presented for poly-crystalline silicon thin film transistors. Green's function approach is adopted to solve the two-dimensional Poisson's equation. The solution for the potential distribution is derived using Neumann's boundary condition at the silicon-silicon di-oxide interface. The developed model gives insight into device behavior due to the effects of traps and grain-boundaries. Also short-channel effects and drain induced barrier lowering effects are incorporated in the model. The potential distribution and electric field variation with various device parameters is shown. An analysis of threshold voltage is also presented. The results obtained show good agreement with simulated results and numerical modeling based on the finite difference method, thus demonstrating the validity of our model.

• 유통과학연구
• /
• 제17권5호
• /
• pp.5-17
• /
• 2019

Purpose - This study aims to exploratorily analyze relationship among pressure on business failure, social safety net perception, and entrepreneurial intention targeting potential business founders - pre-entrepreneurs and re-entrepreneurs. Research design, data, and methodology - Out of 450 collected surveys, 386 were used for analysis. Among these, 216 were from pre-entrepreneurs and 170 were from re-entrepreneurs. Frequency analysis, reliability and validity analysis, and regression analysis were performed. Results - In analysis of pre-entrepreneur and re-entrepreneur's pressure on business failure and social safety net perception, objective environment perception - a subfactor of social safety net perception - had statistically significant difference between the two potential entrepreneur groups. Conclusions - We categorized potential entrepreneurs into pre-entrepreneurs and re-entrepreneurs. Also, the current study suggests importance of social safety net to vitalize food service business startup by validifying its mediating effect between pressure on business failure and attitude towards restaurant business establishment. This research also established groundwork for future studies on ways to improve entrepreneurial intention or startup business sustainability by deducing social safety net perception difference between pre-entrepreneurs and re-entrepreneurs. This study was able to analyze relationship between those two groups in terms of entrepreneurial intention and startup business sustainability.

• 대한전기학회논문지
• /
• 제37권12호
• /
• pp.839-846
• /
• 1988

전기기기의 와류분포를 해석하고자 항때 자기벡터포텐셜을 이용한 2차원적 해석법을 적용하면 해석영성내의 와류의 크기는 구할수 있지만 그 분포 양상은 알 수 없다. 이러한 문제점을 해결하기 위해 전류 벡터포텐셜을 도입하여 지배방정식을 유도하였으며 이에 유한요소법을 적용하여 2차원적 와류분포해석을 시도하였다. 그리도 시간술분항의 취급에는 시간영성가중계산법을 적용하였으며 이에 따른 알고리즘을 도출하였다. 또한 위에 방법을 해석해가 좌우하는 모델 및 와류에 의해 구동토오크가 발생하는 군상적산전력계 의 알루미늄 원판에 적용하여 해석한 결과 그 타당성 및 유용성을 입증할 수 있었다.