• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.1
• /
• pp.49-53
• /
• 2006

Acrylate -PDMS(Polydimethylsiloxane)-Urethane Prepolymer is synthesized through treating diisocynate, HEMA(2-hydroxyethylmethacrylate) and bis(hydroxyalkyl)terminated Poly(dimethylsiloxane) having high oxygen permeability under the DBTDL(Dibutylitin dilaurate) catalyst. Modification of HEMA on bis(hydroxyalkyl)terminated Poly(dimethylsiloxane) is to be able to polymerize with other contact lens materials. And modification of urethane on bis(hydroxyalkyl)terminated Poly(dimethylsiloxane) is to increase elastic property and oxygen transmissibility. This material is analyzed by FT-IR and also will be used to make hydrogel contact lens.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.557-564
• /
• 1996

The interaction between poly(2-hydroxyethylmethacrylate)(poly(HEMA)) which is a material of contact lens containing approximately 45%o water and water soluble amino acids (alanine, arginine, glycine, lysine, methionine, proline, and serine) was investigated by using FT-IR and Raman spectroscopy. The results revealed that arginine and lysine had the strongest interaction with poly(HEMA) among amino acids. The interaction depended on the quantity of charges on ammo acids. They interacted predominately with hydroxyl groups in poly(HEMA).

• Textile Coloration and Finishing
• /
• v.19 no.2
• /
• pp.7-13
• /
• 2007

Photopolymerization of 2-hydroxyethyl methacrylate(HEMA), in the presence of ethyleneglycol dimethacrylate(EGDMA) and 1-Hydroxycyclohexyl phenyl ketone as crosslinker and photoinitiator, respectively, produced crosslinked poly-HEMA hydrogels. The hydrogels were colored by the exhaustion of vinylsul-phone-type reactive dyes. Good colorfastness to laundering was achieved when colored with C.I. Reactive Black 5. We investigated that the effect of coloration on the hydrophilicity and swelling properties of the films. More hydrophilic gel-surfaces were generated with in increase in coloration and crosslinking. Higher surface energy was observed with higher crosslinking level. The more rapid and higher water swellability of poly-HEMA gels after coloration may be resulted from a more opened gel structure by the easier hydration of the hydrophilic sulphonic acid groups of the reacted dyes in water.

• Journal of the Korean Chemical Society
• /
• v.40 no.6
• /
• pp.385-393
• /
• 1996

The interaction between poly(HEMA) which is material of contact lens containing about 45% water and amino acids (alanine, arginine, methionine, proline, glycine, serine, lysine) have been studied by using the thermal analysis methods through DSC and TGA. The experimental results of DSC and TGA were shown that lysine, arginine and alanine have the most stable interaction between poly(HEMA) and amino acids.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.190-195
• /
• 2012

Interfacial and rheological properties of selected hydrogel formulations were studied to understand the contact-lens comfort in end use. It was concluded that protein adsorption from aqueous solution decreased monotonically with increasing surface energy (water wettability) of tested hydrogels. Also, it has revealed that friction coefficient of polydimethylsiloxane-polyvinylpyrrolidone (PDMS-PVP) was significantly larger that 2-hydroxyethyl methacrylate (HEMA) based hydrogels. Interestingly, in artificial tear solution, friction coefficients of HEMA based hydrogels were larger than silicone hydrogels.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.513-521
• /
• 2018

Purpose : : In this study, we made dopamine-functionalized hydrogels containing a cross-linked hyaluronic acid (HA) network and investigated their antioxidant activities. Methods : In the first step, we made poly hydroxyethyl methacrylate(p(HEMA))-based hydrogels post-modified with an interpenetrating polymer network(IPN) structure composed of HA polymers and a p(HEMA) network. The subsequent functionalization with dopamine via an amide coupling reaction resulted in the antioxidant hydrogels. Their antioxidant activities were evaluated using 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) and 2,2-diphenyl-1-picrylhydrazyl radical scavenging assays. Results : The dopamine-modified hydrogels exhibited significant antioxidant activities, when compared to unmodified control. The presence of the HA-IPN structure improved the surface wettability of the hydrogel while dopamine-conjugated IPN hydrogel did not demonstrate the significant difference compared to hydrogel control. Dopamine-modified hydrogels exhibited high transmittance (>88%). Conclusion : The results demonstrate that the development of antioxidant hydrogels based on dopamine-conjugated HA-IPN structures may help develop ophthalmic and biomedical materials.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.202-214
• /
• 2015

Stimuli-responsive biomaterials that alter their function through sensing local molecular cues may enable technological advances in the fields of drug delivery, gene delivery, actuators, biosensors, and tissue engineering. In this research, pH-responsive hydrogel which is comprised of dimethylaminoethyl methacylate (DMAEMA) and 2-hydroxyethyl methacrylate (HEMA) was synthesized for the effective delivery of doxorubicin (Dox) to breast cancer cells. Cancer and tumor tissues show a lower extracellular pH than normal tissues. DMAEMA/HEMA hydrogels showed significant sensitivity by small pH changes and each formulation of hydrogels was examined by scanning electron microscopy, mechanical test, equilibrium mass swelling, controlled Dox release, and cytotoxicity. High swelling ratios and Dox release were obtained at low pH buffer condition, low cross-linker concentration, and high content of DMAEMA. Dox release was accelerated to 67.3% at pH 5.5 for 6-h incubation at $37^{\circ}C$, while it was limited to 13.8% at pH7.4 at the same time and temperature. Cell toxicity results to breast cancer cells indicate that pH-responsive DMAEMA/HEMA hydrogels may be used as an efficient matrix for anti-cancer drug delivery with various transporting manners. Also, pH-responsive DMAEMA/HEMA hydrogels may be useful in therapeutic treatment which is required a triggered release at low pH range such as gene delivery, ischemia, and diabetic ketoacidosis.

• Journal of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.304-310
• /
• 1978

The relative permeabilities, distribution coefficients and diffusion coefficient of some salts which are important components in blood plasma through a poly(HEMA) membrane were measured. The crosslinker which was used for preparing the membrane was tetraethylene glycol dimethacrylate(TEGDMA), the weight percentage of the latter was about 2.8. We found that the diffusion coefficients ($D_m$) of the solutes decrease exponentially with increasing molecular weight, and also that $D_m$'s decrease linearly (except urea) with cylindrical radius (a). These facts were explained by a sieve pore flow model. The relative permeability and diffusion coefficient of urea at various temperature were larger than those of other solutes such as glycine, ${\beta}$-alanine, D-glucose, saccharose and maleic acid. The result indicates that the poly(HEMA) membrane might be suitable for hemodialysis application.

• Journal of Integrative Natural Science
• /
• v.11 no.1
• /
• pp.39-43
• /
• 2018

Poly(hydroxyethyl methacrylate)-based hydrogels were surface-functionalized with spiropyran (SP) derivatives to obtain photochromic contact lenses. The contact lens reversibly changes from colorless to purple as response to UV light since colorless ring-closed SP state converts to purple ring-opened merocyanine (MC) state under UV light irradiation. The purple contact lens emits red light at 640 nm. Importantly, the presence of SP segments did not significantly affect the equilibrium water content (EWC) of the lens. SP-functionalized hydrogel lenses may find potential applications in developing light-adaptive ophthalmic materials.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2006

We polymerized material of AA(Acrylic acid) and BMA(butyl methacrylate) to make up for the weak points of hydrogel contact lens. The synthesis process of silicone synthesis is as follows. Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer was composed after Diisocynate reacted with HEMA(2-hydroxyethylmethacrylate) under the catalyst and it reacted again with bis(hydroxyalkyl) terminated poly(dimethylsiloxane) with high oxygen transmissibility characteristics. HEMA(2-hydroxyethylmethacrylate) was used to make prepolymer that can be polymerized and the urethane was used to improve elasticity and oxygen transmissibility, copolymerization was performed with conventional hydrogel contact lens materials to make silicone hydrogel contact lens with higher oxygen transmissibility. For manufacturing of contact lens, We added BMA(Butyl methacrylate) with better elasticity and flexibility, and AA(Acrylic acid) with higher moisturizing to used contact lens materials. AIBN (Azobis2-methylpropionitrile) as initiator and EGDMA(Ethylene Glycol Dimethacrylat) as crosslinking agent were used and the lens with higher oxygen transmissibility and better moisturizing were manufactured complying with basic contact lens properties, which have several combination trial of each monomer characteristics. Compounding SN which included SILICONE, HEMA, NVP and EGDMA etc was showed by swelling ratio of 9.38% and water content of 23.7%. SN was showed by swelling ratio of 9.38%, water content of 23.7% and a visible ray transmissibility of 89%. SB which added BMA in the SN was showed by swelling ratio of 12.50%, water content of 18.56% and a visible ray transmissibility of 88%. SAB which added both AA and BMA in the SN was showed by swelling ratio of 8.33%, water content of 12.93% and a visible ray transmissibility of 88%.