• 한국재료학회지
• /
• 제26권4호
• /
• pp.222-227
• /
• 2016

Tin oxides have been studied for various applications such as gas detecting materials, transparent electrodes, transparent devices, and solar cells. p-type SnO is a promising transparent oxide semiconductor because of its high optical transparency and excellent electrical properties. In this study, we fabricated p-type SnO thin film using rf magnetron sputtering with an SnO/Sn composite target; we examined the effects of various oxygen flow rates on the SnO thin films. We fundamentally investigated the structural, optical, and electrical properties of the p-type SnO thin films utilizing X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis spectrometry, and Hall Effect measurement. A p-type SnO thin film of $P_{O2}=3%$ was obtained with > 80% transmittance, carrier concentration of $1.12{\times}10^{18}cm^{-3}$, and mobility of $1.18cm^2V^{-1}s^{-1}$. With increasing of the oxygen partial pressure, electrical conductivity transition from p-type to n-type was observed in the SnO crystal structure.

• 대한화학회지
• /
• 제58권1호
• /
• pp.9-16
• /
• 2014

Borate 완충용액에서 Ni의 부동화 피막의 생성과정(growth kinetics)과 부동화 피막의 전기적 성질을 변전위법, 대 시간 전류법 그리고 단일 주파수 또는 다중 주파수 전기화학적 임피던스 측정법으로 조사하였다. 이때 생성되는 산화피막은 Mott-Schottky 식이 적용되는 p-형 반도체 성질을 보였으며, 낮은 전극전위에서 생성되는 Ni의 부동화 피막 $Ni(OH)_2$는 전극 전위가 증가하면서 NiO, NiO(OH)로 변화되는 것을 알 수 있었다.

• 대한화학회지
• /
• 제61권6호
• /
• pp.320-327
• /
• 2017

Borate 완충용액에서 Co의 부동화 피막의 생성과정(growth kinetics)과 부동화 피막의 전기적 성질을 변전위법, 대 시간 전류법 그리고 단일 주파수 전기화학적 임피던스 측정법으로 조사하였다. 불안정 부동화가 일어나는 낮은 전극전위에서 생성되는 Co의 부동화 피막 $Co(OH)_2$와 CoO로 구성되었으며, 전극전위가 증가하면 산화피막의 조성이 $Co_3O_4$, CoOOH로 변화되었다. 또한 산화피막의 조성은 전극전위와 산화시간에 따라 변하였다. 이 때 생성되는 산화피막은 Mott-Schottky 식이 적용되는 p-형 반도체 성질을 보였다.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.642-647
• /
• 2014

For feasible study of opto-electrical application regarding to oxide semiconductor, we implemented the N doped ZnO growth using a atomic layer deposition technique. The p-type ZnO deposition, necessary for ZnO-based optoelectronics, has considered to be very difficulty due to sufficiently deep acceptor location and self-compensating process on doping. Various sources of N such as $N_2$, $NH_3$, NO, and $NO_2$ and deposition techniques have been used to fabricate p-type ZnO. Hall measurement showed that p-type ZnO was prepared in condition with low deposition temperature and dopant concentration. From the evaluation of photoluminescence spectroscopy, we could observe defect formation formed by N dopant. In this paper, we exhibited the electrical and optical properties of N-doped ZnO thin films grown by atomic layer deposition with $NH_3OH$ doping source.

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.7-11
• /
• 2003

Photoelectrochemical response and electrochemical impedance behavior was investigated for passive film formed on sputter-deposited Cr alloy in $0.1kmol{\cdot}m^{-3}$. Photoelectrochemical action spectrum could be separated into two components, which were considered to be derived from $Cr_2O_3$ ($E_g\sim3.6eV$) and $ Cr(OH)_3 $ ($E_g\sim2.5eV$). The band gap energy, $E_g$, of each component was almost constant for various applied potentials. polarization periods and alloying additives. The photoelectrochemical response showed negative photo current for most potentials in the passive region. Therefore, the photo current apparently exhibited p-typesemiconductor behavior. On the other hand, Mort-Schottky plot of the capacitance showed positive slope, which means that passive film formed on Cr alloy has n-type semiconductor property. These apparently conflicting results are rationally explained assuming that the passive film on Cr alloy formed in the acid solution has n-type semiconductor property with a fairly deep donor level in the band gap and forms an accumulation layer in the most of potential region in the passive state.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.146-150
• /
• 2005

상온/상압의 분위기에서 코로나 분사 합성법을 이용하여 반도체 실리콘 나노 입자를 제조하였으며, 실리콘 입자의 전기적 특성을 관찰하기 위해 p-type 실리콘웨이퍼 위에 실리콘 나노 입자를 증착시켰다. 이때, 제조된 실리콘 나노 입자의 크기는 약 10 nm이었으며 기하표준편차는 1.31로 단분산성을 나타내었다. 이러한 조건에서, 실리콘 나노 입자의 양자 점 효과를 이용한 비휘발성 반도체 메모리를 제조하여 메모리효과를 분석한 결과, flat band voltage의 차이가 약 1.5 Volt 발생함을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제3권1호
• /
• pp.27-30
• /
• 2004

In this work, the variation of the sidewall profile of a thick photoresist on the wavelength and proximity gap was investigated. PMER P-LA900PM, DNQ (DiazoNaphthoQuinone) novolac type photoresist, is used for experiments. The calculated results agreed well with the experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.242-242
• /
• 2010

산화 알루미늄($Al_2O_3$) 박막을 p-type Czochralski(CZ) Si 위에 Remote Plasma Atomic Layer Deposition(RPALD)을 이용하여 저온 공정으로 증착하였다. Photolithography 공정으로 grid 패턴을 형성한 후 열 증착기로 알루미늄을 증착하여 MIS-IL (Metal-Insulator-Semiconductor Inversion Layer) solar cell을 제작하였다. 반응소스로는 Trimethylaluminum (TMA)과 $O_2$를 이용하였다. $Al_2O_3$ 박막의 전기적 특성 평가를 위해 MIS capacitor를 제작하여 Capacitance-voltage (C-V), Current-voltage (I-V), Interface state density ($D_{it}$)를 평가하였으며 Solar simulator를 이용하여 MIS-IL Solar cell의 Efficiency을 측정하였다.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.720-724
• /
• 2016

Transparent n-type metal-oxide semiconductor of $MoO_x$ was applied on a p-type Si substrate for high-performing heterojunction photodetector. The formation of $MoO_x$ on Si spontaneously established a rectifying current flow with a high rectification ratio of 1,252.3%. Under light illumination condition, n-type $MoO_x$/p-type Si heterojunction device provided significantly fast responses (rise time : 61.28 ms, fall time : 66.26 ms). This transparent metal-oxide layer ($MoO_x$) would provide a functional route for various photoelectric devices, including photodetectors and solar cells.

• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.55-59
• /
• 2020

Copper Oxide (CuO) films were deposited on the n-type silicon wafer by rf magnetron sputtering for heterojunction solar cells. And then the samples were treated as a function of the annealing temperature (300-600℃) in a vacuum. Their electrical, optical and structural properties of the fabricated heterojunction solar cells were then investigated and the power conversion efficiencies (PCE) of the fabricated p-type copper oxide/n-type Si heterojunction cells were measured using solar simulator. After being treated at temperature of 500℃, the solar cells with CuO film have PCE of 0.43%, Current density of 5.37mA/㎠, Fill Factor of 39.82%.