• 한국의학물리학회지:의학물리
• /
• 제19권1호
• /
• pp.56-62
• /
• 2008

본 연구에서는 선형가속기 출력 검출용으로 상용화된 PTW-LinaCheck의 선량 특성을 조사하고 임상적 응용에 관하여 논의하고자 한다. 본 연구에서는 6, 15MV광자선 및 4, 6, 9, 12, 16 MeV전자선에 대하여 측정값의 재현성, 선형성, 선량률 의존성을 조사하였다. 또한 측정값의 오차범위를 조사하기 위하여 일일 점검 시 검출기의 셋업의 기하학적 오차에 의한 측정값의 변화를 조사하였다. 본 측정의 결과로서 일일 측정 시 셋업 오차에 의한 측정값의 변화는 재현성을 포함하여 ${\pm}0.6%$ 이내로 평가되었다. 이 때 선형성과 선량률 의존성에 의한 오차는 무시할 정도였다. 이를 통하여 LinaCheck는 선량 특성과 편리한 셋업의 관점에서 양호한 것으로 결론을 내렸다. 아울러 본 논문에서는 본 검출기를 사용한 60여 일간의 임상적 적용 사례도 제시하였다.

• The Journal of Korean Physical Therapy
• /
• 제23권3호
• /
• pp.37-42
• /
• 2011

Purpose: The principal objective of this study was to evaluate the power output of ultrasound in Korean clinics and compare the value with Korean and global standards. Methods: A total of 69 units were measured for ultrasound power output. The normal range of power output level was ${\pm}30%$ of the output set according to KFDA standards. Device model, manufacturer, ERA, and BNR were obtained via simple questionnaires. A portable ultrasound power meter was used for output measurement. Results: 37 machines, with reported ERA values, were assessed for power output per unit area. Of these machines, 13 (37.14%) were considered to be compliant with US FDA standards at 0.5, 1.0, 1.5, $20W/cm^2$ and 18 (51.43%) were considered within KFDA standards. The remainder of the machines were outside the standard error and evidenced irregular output levels, even though most of them were the same model. Conclusion: Appropriate ultrasound intensity is incredibly important for safety and effective use. Therefore, the KFDA standards regarding ultrasound may require revision in light of global standards, including BNR and ERA additionally, attention should be paid to regular calibration for safe use in clinical practice.

• 한국의학물리학회지:의학물리
• /
• 제13권1호
• /
• pp.27-31
• /
• 2002

6MeV 전자선의 output 인자를 결정하기 위해 간편하게 output 인자를 예측하는 수단인 1D(Dimension) 방법을 이용하였으며 그리고 1D 방법으로 결정된 output 인자를 개별적 beam cutout 하에서 직접 측정한 output 인자와 비교하여 1D 방법의 정확성을 분석하였다. 1D 방법은 정방형 field의 한 변과 항상 동일한 한 변을 갖는 사각형 field의 output 인자로서 규정되며, 임의의 사각형 field (X,Y)의 output은 1D output 인자의 곱으로 주어진다. 6MeV 전자선의 대단히 큰 정방형 field의 output은 1D 방법을 사용하면 실제보다 높은 값을 나타내지만 교정인자 CF=C.[(X-10)(Y-10)/$\mid$(X-10)(Y-10)$\mid^{1/2}]$를 적용하면 개별적 cutout하에 직접 측정된 output 인자와 잘 일치하였으며 그 오차 범위는 1% 이내였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.395-398
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gun control were proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0mA to 300mA over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than $1.4\%$ over the current range from 0A to 300mA.

• 경영과학
• /
• 제15권2호
• /
• pp.125-142
• /
• 1998

The aggregation on linear large-scale dynamic systems is examined in this paper and a "two-step" approach is proposed. In this procedure, the aggregated system consists of two subsystems. The first subsystem represents aggregation through the retainment of dominant eigenvalues of the original system, leading to a first approximation of the desired output of the original system. The purpose of augmenting it with a second subsystem is to provide an estimation of the error on the first approximation, thus permitting a second correction to the output approximation and resulting in an output approximation of greater accuracy. Optimization techniques are discussed for the determination of unknown parameters in the aggregated system. These techniques use minimization principles of certain suitable performance indices and are developed for both single input-single output and multiple input-multiple output system. Numerical examples illustrating these procedures are given and the results are compared with those obtained using existing methods. Finally, a pharmacokinetics problem is studied from the aggregation point of view.

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.697-702
• /
• 2001

The ring laser gyro(RLG) has been used extensively in strapdown inertial navigation system(SDINS) because of the apparent of having wide dynamic range, digital output and high accuracy. The dithered RLG system has dynamic motion at sensor level, caused by the dithering motion to overcome the lock-in threshold. In this case, an attitude error is produced by not only the true coning of the vehicle motion but also the pseudo coning of the sensor motion. This paper describes the definition of the multi-frequency coning motion and its noncommutativity error to reject the pseudo coning error produced by the sensor motion such as the dithered RLG. The simulation results are presented to minimize the multi-frequency coning error.

• 전기전자학회논문지
• /
• 제16권1호
• /
• pp.34-44
• /
• 2012

본 논문은 스트레인 게이지(strain gauge)식 로드셀(loadcell)의 대표적인 크립오차(creep error)에 대해서 디지털 신호처리방식을 사용한 실용적인 보상법(compensation method)을 제안한다. 신호의 보상방법은 로드셀의 출력응답을 실측해서 보상상수(시정수)와 보상계수를 결정한 후 마이크로프로세서의 내부메모리에 보상상수와 보상계수를 저장한 후 중량값을 디지털로 표시할 시점에 마이크로프로세서에서 연산처리한 크립에러 보상처리값을 로드셀의 출력신호에서 실측한 에러값과 서로 상쇠시키는 보상방법이다. 추가적으로 보상방법을 디지털전자저울에 직접 적용 시험하기 위해서 전용의 보상소프트웨어를 제작한 후 디지털전자저울의 크립특성을 실측해서 보상전 정격출력의 크립오차 0.03%의 로드셀을 정밀디지털전자저울의 허용오차 범위인 0.01%~0.001%이상으로 복잡한 연산처리 없이 정확하게 직접 보상처리하는 실용적인 방법을 제안했다.

• 대한산업공학회지
• /
• 제31권3호
• /
• pp.257-264
• /
• 2005

This paper suggests a heuristic algorithm for the clustering problem. Clustering involves grouping similar objects into a cluster. Clustering is used in a wide variety of fields including data mining, marketing, and biology. Until now there are a lot of approaches using Self-Organizing Feature Maps(SOFMs). But they have problems with a small output-layer nodes and initial weight. For example, one of them is a one-dimension map of k output-layer nodes, if they want to make k clusters. This approach has problems to classify elaboratively. This paper suggests one-dimensional output-layer nodes in SOFMs. The number of output-layer nodes is more than those of clusters intended to find and the order of output-layer nodes is ascending in the sum of the output-layer node's weight. We can find input data in SOFMs output node and classify input data in output nodes using Euclidean distance. We use the well known IRIS data as an experimental data. Unsupervised clustering of IRIS data typically results in 15 - 17 clustering error. However, the proposed algorithm has only six clustering errors.

• 대한전자공학회논문지SD
• /
• 제45권3호
• /
• pp.54-59
• /
• 2008

본 논문에서는 광범위 출력전압을 위한 고정밀 BiCMOS cascode 전류미러를 제안하였다. 제안한 전류미러는 베이스 전류에러를 보상하는 BJT 전류미러를 기본으로 하고 있다. NMOS-NMOS cascode 구조 대신에 npn-NMOS cascode 구조를 사용하여, 출력저항과 출력전압 범위를 증가시켰다. npn 전류 복사 트랜지스터는 입력전류를 출력전류로 복사하고, NMOS 트랜지스터는 출력저항을 증가시켜 정밀한 전류 복사를 가능케 한다. 제안한 전류미러는 광범위 출력전압에서 정밀하게 전류를 복사한다. 5V/16V 0.5um BCD 공정을 이용하여 제작한 칩을 측정하여 검증하였고, $0.3V{\sim}16V$의 출력전압 범위에서 전류 에러는 $-2.5%{\sim}1.0%$이다.

• Journal of Biosystems Engineering
• /
• 제21권3호
• /
• pp.283-292
• /
• 1996

Automatic guidance of farm tractors would improve productivity by reducing operator fatigue and increasing machine performance. To control tractors within $\pm$5cm of the desired path, fuzzy and adaptive steering controllers were developed to evaluate their characteristics and performance. Two input variables were position and yaw errors, and a steering command was fed to tractor model as controller output. Trapezoidal membership functions were used in the fuzzy controller, and a minimum-variance adaptive controller was implemented into the 2-DOF discrete-time input-output model. For unit-step and composite paths, a dynamic tractor simulator was used to test the controllers developed. The results showed that both controllers could control the tractor within $\pm$5cm error from the defined path and the position error of tractor by fuzzy controller was the bigger of the two. Through simulations, the output of self-tuning adaptive controller was relatively smooth, but the fuzzy controller was very sensitive by the change of gain and the shape of membership functions. Contrarily, modeling procedure of the fuzzy controller was simple, but the adaptive controller had very complex procedure of design and showed that control performance was affected greatly by the order of its model.