• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.786-795
• /
• 2015

In this paper, an active damping control scheme for LLCL filters based on the PR (proportional-resonant) regulator is proposed for grid-connected three-level T-type PWM converter systems. The PR controller gives an infinite gain at the resonance frequency. As a result, the oscillation can be suppressed at that frequency. In order to improve the stability of the system in the case of grid impedance variations, online grid impedance estimation is applied. Simulation and experimental results have verified the effectiveness of the proposed scheme for three-phase T-type AC/DC PWM converters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.307-310
• /
• 1996

In this paper, we deal with some numerical analyses of a re-entry vehicle in a 2-dimensional plane as an optimal control problem. To reduce the dynamic load, the heat load and the oscillation in the trajectory, we researched the trajectories in which the load factor or the rate of flight path angle was minimized during re-entry. In addition to that, taking advantage of the monotonous subarc method and the folded time-axis method, we tried to find the heat-less and load-less trajectory with combinations of some sectional functionals so that we can achieve more comfortability.

• 대한전자공학회논문지
• /
• 제11권6호
• /
• pp.16-24
• /
• 1974

본 논문은 종래의 NIC회로의 구성방법을 종합하여 일반화하는 방법으로써 파라미터 제어회로와 전압 또는 전류제어회로에 의한 NIC구성방법을 제시하였다. 그리고 FET에 의해 개방 및 단락안정형 NIC회로를 구성하고 회로해석에 의한 임피던스와 실험치를 비교하여 NIC특성을 확인하고 회로해석이 타당함을 검토 확인하였다. 또한 병렬 LC를 NIC와 직렬로 연결하여 발진상태를 실험으로 확인하고 NR에 의한 발진상태와 비교 검토하였다.

• 대한물리의학회지
• /
• 제3권2호
• /
• pp.121-125
• /
• 2008

Purpose : The objective of this study was conducted to find out the treatment of joint problems. Methods : This is a literature study with books, seminar note and international course books. Results : Passive oscillation and distraction movement therapy is only joint mobilization and pain control. In the joint therapy need muscle strengthening, training of eccentrical control and neurophysiological therapy for joint mobility, stability, stability of mobility and skill. Conclusion : Joint therapy is not only joint mobility but also strengthening of soft tissue. Need the neurophysiological therapy those are use of ventromedial motor nucleus and dorsolateral motor nucleus, reciprocal inhibition, eccentrical muscle contraction training, proprioceptors and exteroceptor for structures and functional activities. For the pain control, reduce swelling, keeping GAGs and functional activities need direct and indirect therapy.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.616-623
• /
• 2003

Conventional P/PI speed controller of today's servo drives should be manually tuned the controller switching set-point by trial-and-errors, which may translate the drive system down-time and loss of productivity. The adjustable drive performance is heavily dependent on the quality of the expert knowledge and becomes inadequate in applications where the operating conditions change in a wide range, i.e., tracking command, acceleration/deceleration time, and load disturbances. In this paper, the demands on simple controls/setup are discussed for industry servo drives. Analyzing the frequency content of motor torque command, P/PI control mode switching is automatically performed with some prior knowledge of the mechanical dynamics. The dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of traditional P/PI control scheme, extensive test is carried out on actual servo system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.553-557
• /
• 1994

We propose a design method that uses H$_{\infty}$ optimization method to suppress oscillation of a shaft between motor and load for high precision (0.001 % of reference input) position controls. PI speed control loop was introduced as a minor loop. Standard problem is used for the modeling of the system and Glover-Doyle's algorithm is used for the optimization in the H$_{\infty}$ space. Friction is considered to be an important factor that makes it difficult for the system to reach steady state in short time. In this paper, we propose a hybrid controller that includes PI speed feedback loop, which is expected to have a role to reject torque disturbance like friction.n.n.

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.786-791
• /
• 2009

Recently, digital camera module has been extensively utilized in mobile devices. The digital camera module should be smaller and lighter than digital still camera module to be used in mobile device. But, mobile camera can't get high quality image as good as the one of digital still camera due to the optical limitation of minimized module. Especially, AE system of mobile camera occurs excessive hunting and oscillation due to miniaturization of module. In this paper, improved AE algorithm which is applied fuzzy PI control is suggested to compensate this point.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.463-468
• /
• 2009

Torsional oscillations of the drivetrain in electric vehicles are generated under rapid driving conditions. These lead to an uncomfortable jerking of the vehicle and an increased stress of the mechanical components. To suppress torsional oscillations, the low pass and notch filters between the torque command from the acceleration pedal and electric motor input torque are suggested. The filter parameters are optimized based on Taguchi method with $L_{18}(3^5)$ orthogonal array. The signal to noise (S/N) ratio mainly depends on slew rate of motor input torque, damping ratio and natural frequency of notch filter. With the proposed suppression control scheme, the S/N ratio is shown to be increased by 4.7dB and the torque overshoot of the drive shaft is reduced to 30%.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.166-169
• /
• 2002

The purpose of this paper is to develop systematic analysis and automatic tuning rule of PID controller for industry servo applications. Considering the coupling of inner current control loop and speed loop delay, the target plant fit into second-order plus time delay model. Based on PID controller design for high-order plus known/unknown time delay plant model, some formulars are provided for the control gain calculation and system-based theoretical analysis is developed, and it also allows an automatic controller setup to benefit the inexperienced user. In addition, the proposed design rule gives uniformly satisfactory performance and the motor speed stays on a desired response curve with minimal oscillation and settling time. This approach can be applicable in conjunction with the cascaded control loop which is widely used in practice.