• Korean journal of applied entomology
• /
• v.56 no.3
• /
• pp.253-259
• /
• 2017

Fumigation using chlorine dioxide ($ClO_2$) has been regarded as a potential control technique against stored grain insect pests. The control efficacy can be enhanced with increase of opening rates of spiracles by facilitating the toxic gas delivery to internal body. To test this hypothesis, this study used the Indianmeal moth, Plodia interpunctella, which was known to be susceptible to $ClO_2$, and analyzed the opening rate of spiracles. A total of 9 pairs of spiracles were observed in P. interpunctella larvae, in which one pair was located on the prothorax and eight pairs were on the abdomen. Within the body, the spiracles were connected to longitudinal and transverse tracheal trunks. The open spiracles were determined by the dye-infiltration method. Based on this method, the opening rate of spiracles increased up to about 60% with increase of ambient temperatures. Furthermore, exposure to carbon dioxide stimulated the opening rate of spiracles up to about 95%. In contrast, exposure to $ClO_2$ prevented the spiracle opening and resulted in only 25% of spiracles in an opening state. The addition of carbon dioxide to $ClO_2$ treatment rescued the opening rate of spiracles as much as the carbon dioxide single treatment. Based on this modulatory activity of carbon dioxide against spiracles, the combined treatment of $ClO_2$ with carbon dioxide resulted in significant increase of its toxicity against P. interpunctella compared to a single $ClO_2$ treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.42-52
• /
• 2017

DASH (Dynamic Adaptive Streaming over HTTP) is an adaptive streaming technique that enables transmission of multimedia content when clients request the multimedia contents to server. In this system, to ensure the best quality of the content to satisfy users, it is necessary to precisely measure the residual bandwidth. However, the measured residual bandwidth by the DASH, which is not considering the transmission features of TCP, varies by the size of previous media segment, which makes it hard to ensure QoE to users. In this paper, we excluded the TCP Slow start range from measurement of residual bandwidth and suggested the new DASH bandwidth measuring method to decrease the error. Then, we realized the method in DASH system based on open source, and compared the existing measuring method. The new method showed that the accuracy of result has increased by 20%. Also, it could improve the QoE of users in terms of service quality and number of changes of segment quality.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.4
• /
• pp.23-32
• /
• 1988

The rates of infiltration contributed to the flow fo water in an unconfined aquifer under the partially penetrated stream at an ungaged station and the corresponding base flow in channel are coupled by using the hydraulic and/or hydrologic characteristics obtained from the geomorphologic and soil maps. For the determination of groundwater flow, the linearized model which is originally Boussinesq's nonlinear equation is applied in this study. Also, a stream flow routing model for base flow in channel is based on a simplification of the Saint-venant. The distributed runoff model with piecewise spatial uniformity is presented for obtaining its solution based on a finite difference technique of the kinematic wave equations. The method developed in this study was tested to the Bocheong watershed(area : $475.5km^2$) of the natural stream basin which is one of tributaries in Geum River basin in Korea. As a result, it is suggested that the rationality of hydro-graph separation according to a wide variability in hydrogeologic properties be worked out as developing the physically based subsurface model. The results of the present model are shown to be possible to simulate a base flow due to an arbitrary rate of infiltration for ungaged basins.

• BMB Reports
• /
• v.39 no.5
• /
• pp.502-510
• /
• 2006

2C-methyl-D-erythritol 2, 4-cyclodiphosphate synthase (MECPS, EC: 4.6.1.12) is the fifth enzyme of the non-mevalonate terpenoid pathway for isopentenyl diphosphate biosynthesis and is involved in the methylerythritol phosphate (MEP) pathway for ginkgolide biosynthesis. The full-length mecps cDNA sequence (designated as Gbmecps) was cloned and characterized for the first time from gymnosperm plant species, Ginkgo biloba, using RACE (rapid amplification of cDNA ends) technique. The full-length cDNA of Gbmecps was 874 bp containing a 720 bp open reading frame (ORF) encoding a peptide of 239 amino acids with a calculated molecular mass of 26.03 kDa and an isoelectric point of 8.83. Comparative and bioinformatic analyses revealed that GbMECPS showed extensive homology with MECPSs from other species and contained conserved residues owned by the MECPS protein family. Phylogenetic analysis indicated that GbMECPS was more ancient than other plant MECPSs. Tissue expression pattern analysis indicated that GbMECPS expressed the highest in roots, followed by in leaves, and the lowest in seeds. The color complementation assay indicated that GbMECPS could accelerate the accumulation of $\beta$-carotene. The cloning, characterization and functional analysis of GbMECPS will be helpful to understand more about the role of MECPS involved in the ginkgolides biosynthesis at the molecular level.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.113-125
• /
• 2007

Improved numerical method to obtain the exact stiffness matrices is newly proposed to perform the spatially coupled elastic and stability analyses of non-symmetric and open/closed thin-walled beam on elastic foundation. This method overcomes drawbacks of the previous method to evaluate the exact stiffness matrix for the spatially coupled stability analysis of thin-walled beam-column This numerical technique is accomplished via a generalized eigenproblem associated with 14 displacement parameters by transforming equilibrium equations to a set of first order simultaneous ordinary differential equations. Next polynomial expressions as trial solutions are assumed for displacement parameters corresponding to zero eigenvalues and the eigenmodes containing undetermined parameters equal to the number of zero eigenvalues are determined by invoking the identity condition. And then the exact displacement functions are constructed by combining eigensolutions and polynomial solutions corresponding to non-zero and zero eigenvalues, respectively. Consequently an exact stiffness matrix is evaluated by applying the member force-deformation relationships to these displacement functions. In order to illustrate the accuracy and the practical usefulness of this study, the numerical solutions are compared with results obtained from the thin-walled beam and shell elements.

• Journal of Chest Surgery
• /
• v.35 no.11
• /
• pp.807-811
• /
• 2002

Due to its less invasive nature and superior visual field, video-assisted thoracescopic excision of mediastinal mass is thought to be comparable to open thoracotomy. Material and Method : From January 1995 to August 2001, the medical records of 38 patients who underwent video-assisted thoracoscopic excision of mediastinal mass was retrospectively analyzed. The outcome of these patients were compared with 5 patients who converted to thoracotomy Result: Male to female ratio was 13(34.2%) : 25(65.8%), and mean age was 39.2$\pm$35.4 years. Regarding the pathology, there were 8 neurilemmomas(21.1%), 6 thymic cysts (15.8%), 5 teratomas(13.2%), 5 ganglioneuromas(13.2%), 4 bronchogenic cysts(10.5%), 3 pericardial cysts(7.9%), 3 thymomas(7.9%), and 2 lymphangiomas(5.3%). The mean operation time was 110.6$\pm$7.0 minutes, mean postoperative tube stay was 4.2$\pm$0.4 days, mean postoperative hospital stay was 5.2$\pm$0.4 days, and mean number of injection of analgesics was 1.9$\pm$0.4 times. Although the mean values for the above indices were less than those of the thoracotomy conversion cases, they were statistically insignificant. Postoperative complications of videoassisted thoracoscopic excision included chylothorax, prolonged air leakage, and unilateral phrenic nerve palsy, all of which recovered before patient discharge. There was, however, permanent unilateral ptosis in one patient. Conclusion : As video-assisted thoracoscopic excision of mediastinal mass is safe, less painful, conducive to earlier recovery and cosmetically more appealing, a more active application of this technique is recommeded.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.433-445
• /
• 2010

The aim of this study was to evaluate the fixation effect by connecting impression copings and to compare the three types of impression trays which were used in open tray impression technique. Experimental groups used 3 types of impression trays which are custom tray, plastic metal combination tray and polycarbonate stock tray. These three groups were subdivided into splinted and non-splinted impression copings group. The total number of experimental groups was six. 10 specimens were made for each group. We used 1-screw test, observing the specimen on which only one side abutment of reference framework was fixated with 20 Ncm. The gap between implant analogue and abutment of the other side was observed by stereo microscope. It was measured at 6 points in each specimen. Measuring value was selected when same result was revealed 3 times. Recorded data were statistically analyzed. Whether impression copings were splinted or not, there was no significant difference among custom tray group, plastic metal combination tray group, and polycarbonate stock tray group. Significant statistical difference in vertical fit discrepancy was found between splinted and non-splinted impression copings group with custom tray, plastic metal combination tray and polycarbonate stock tray (p<0.05).

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2015

The number of mobile terminals equipped with a GPS module is steadily increasing today. However, because they using code pseudorange measurements in positioning, the positioning accuracy of mobile terminals is lower than that of those receivers using carrier phases. Especially, the multipath signal causes more significant errors in code pseudoranges. Therefore, the techniques of multipath detection and elimination is necessary. In this study, as an initial analysis of multipath detection and elimination technique development, we tested the feasibility of multipath signal detection using GPS signal strength information. We found that the GPS signal strength increases as the elevation angle gets higher in the open-sky environment. Also, we found that the signal strength decreases when there were some signal reflectors nearby. We checked the repeatability of the signal strength variation characteristics by reflecting repeat time of GPS satellites. As a result, this characteristics repeats almost perfectly when GPS satellites pass the same orbit. Therefore, we found that it is not a temporary phenomenon and the multipath signal detection should be possible by using GPS signal strength information.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.761-772
• /
• 2008

The object of this study is to develop the model that solves the numerically difficult problems in hydraulic engineering and to demonstrate the applicability of this model by means of various test examples, such as, verification in the gradually varied unsteady condition, three steady flow problems with the change of bottom slope with exact solution, and frictional bed with analytical solution. The governing equation of this model is the integral form of the Saint-Venant equation satisfying the conservation laws, and finite volume method with the Riemann solver is used. The evaluation of the mass and momentum flux with the HLL Riemann approximate solver is executed. MUSCL-Hancock scheme is used to achieve the second order accuracy in space and time. This study introduce the new and simple technique to discretize the source terms of gravity and hydrostatic pressure force due to longitudinal width variation for the balance of quantity between nonlinear flux and source terms. The results show that the developed model's implementation is accurate, robust and highly stable in various flow conditions with source terms, and this model is reliable for one-dimensional applications in hydraulic engineering.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.2
• /
• pp.1-9
• /
• 2010

This research was conducted as a part of a research project entitled 'A Fact-finding Survey and Improvement Method for Practical Engineer'. The aim of this research is to explore the educational development strategy for KUT, which is the Korea's leading university of practical engineering, by setting the relevant educational goal for training practical engineer and evaluating the core competencies of practical engineer as well as professors. The research is categorized as follow: the direction to be differentiated from other universities, the core competencies of practical engineer, the core curriculum for the training of practical engineer, professors's competencies for training of practical engineer, developing strategy for establishing the identity of KUT. Delphi technique was applied for survey and selected 32 panels including directors of Korean Institute for Practical Engineering Education, KUT professors and outside experts were involved in that survey. Delphi survey was conducted for three times. In the first survey, suggestions on five categories from an open questionnaire were summarized into 73 questions. 2nd and 3rd questionnaires were developed using the summarized questions, distributed and collected by email, thereafter, the suitability and necessity of each item were rated in five-point Likert scale, calculated and analyzed the results.