• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.7-9
• /
• 2011

본 논문은 LED 백라이트 구동을 위한 전력변환 제어기 설계 및 동특성에 대해 설명한다. 또한 근래 산업계에서 널리 사용하는 operational transconductance amplifier(OTA)와 operational amplifier(op-amp)의 상관관계를 분석하여 각각의 소자를 이용한 최적 제어기를 설계하였다. 설계와 해석을 위해 PSIM 시뮬레이션을 사용하였으며 구현한 PSIM 모델은 실험을 통하여 타당성을 증명하였다.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.189-192
• /
• 1991

This paper presents a modular structure design of analog Hopfield neural network. Each multiplier consists of four MOS transistors which are connected to an op-amp at the front end of a neuron. A pair of MOS transistor is used in order to maintain linear operation of the synapse and can produce positive or negative synaptic weight. This architecture can be expandable to any size neural network by forming tree structure. By altering the connections, other nework paradigms can also be implemented using this basic modules. The stength of this approach is the expandability and the general applicability. The layout design of a four-neuron fully connected feedback neural network is presented and is simulated using SPICE. The network shows correct retrival of distorted patterns.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.849-852
• /
• 2001

본 눈문에서는 뒤틀림, 응력, 압력[1], 토크, 가속도 등의 물리적인 동적 현상을 측정하여 수집된 데이터를 처리하기 위한 신호처리(Signal Processins) 기능이 결합되어 넓은 용도로 활용할 수 있는 센서 신호 수집 시스템을 구현하였다. 구현된 시스템은 data acquisition board 의 하드웨어와 소프트웨어로 나누어 볼 수 있다. 하드웨어의 구성은 아날로그부, 디지털부, 그리고 시스템 인터페이스 처리부로 되어 있다. 아날로그부에서는 센서신호를 받아서, PGA (Programmable Gain Amplifier)[2]와 Op-Amp를 사용하여 signal conditioning 처리하여 8차 Lowpass Filter 로 보낸다. Filtering 된 신호는 ADC (Analog to Digital Converter) 가 내장되어 있는 PIC(3) microcontroller로 보내져 AD변환과 디지털 신호 처리를 한다. 처리된 신호는 RS232 인터페이스를 통해 호스트 컴퓨터로 보내 사용자가 분석할 수 있도록 한다. 또한 LCD display 실시간으로 확인, 분석할 수 있으며 동시에analog output에서 센서신호의 특징을 분석 할 수 있도록 한다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.791-794
• /
• 1998

This paper presents a constant gm input stagefor low-voltage rail-to-rail operational amplifier. A proposed scheme uses two current paths to keep sum of the biasing currents of the complimentary input pairs. The op amp was designed in a $0.8\mu\textrm{m},$ n-well CMOS, double-polysilicon and double-metal technology. This achieved in weak inversion. The circuit can operate in power supply voltage from 1.5V up to 3V. An open-loop gain, AV, was simulated as 84dB for 15pF load. An unit-gain frequency, fT was 10MHz.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.166-170
• /
• 1997

A Single phase induction motor is the predominant fractional horsepower power rated, extensively used in domestic and industrial application. For example, these motors provide the motive power to washing machines, fans, refrigerators, etc. In this paper, single phase induction motor input current was detected by a small current transformer and determined TRIAC gate signal by using op-amp analog circuit. The soft-start strategy is based on limited auxiliary current angle during starting period in the closed-loop control. The Simulation and experimental result show the motor's starting characteristics of the proposal starting system and are compared with centrifugal switch starting motor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.277-279
• /
• 2002

This paper is an experimental research of the design of a cell battery charger using switching methods. The developed charger in this paper can do both the equalizing current charge and floating charge. Also, it is easily transferable. Power MOS FET was used for the full bridge converter of the charger, and ZVS was applied for the switching method of the converter. Also, Customized IC was used for the control circuit in order to simplify ZVS mode. The setting current and floating current used for the charger were designed by using OP AMP. Based on the process provided by the current research, a sample converter with the power rating of 5KVA was developed and is field-testing to improve its validity and stability.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.177-180
• /
• 1998

높은 Q가 요구되는 고주파 신호 처리용 필터 설계에서는 흔히 SC 필터를 사용하고 있다. 처리하고자 하는 신호가 고주파수이고, 선택도 Q 값이 매우 높은 경우에는, SC 필터에 사용하는 증폭기의 성능이 빠르고, 직류 성분 이득이 커야만 한다. 이와 같은 속도와 이득이 요구됨에 따라 일반적인 범용 증폭기는 이득이 충분치 못하여 사용이 제한되고, 설사 범용 증폭기를 이용하여 필터를 구성하였다 해도 그 특성에 많은 제한을 줄 수밖에 없다. 또한 GaAS MESFET op amp의 경우, 최근의 논문에서도 60[dB] 이상의 이득이 제안된 바 없으므로, 필터 구성시 또 다른 설계 기술이 요구된다. 따라서 본 논문에서는 GaAS MESFET 능동 SC 적분기의 유한한 이득과 offset 전압을 보정한 새로운 구조의 적분기를 제안한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.553-561
• /
• 2001

Chua's oscillator is a simple electronic circuit which exhibits a variety of bifurcation phenomena and attractors, It consist of two capacitors, an inductor, two linear resistors, and a nonlinear resistor. When the circuit exhibits chaotic signals, the nonlinear resistor of Chua's oscillator may have six different voltage - current characteristics. In this paper, the design methodology for practical implementation of the nonlinear resistors which have all these characteristics is described. In addition, the effectivness of result is shown by not only the computer simulation but also the experimental test.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.584-591
• /
• 2004

The conventional analog-based firing circuit can be implemented by comparing a linearly decreasing periodic sawtooth waveform synchronized to the ac supply, with a control signal corresponding to the desired converter delay angle. This circuit requires a large number of passive components (resistance and capacitor) and careful adjustment of the synchronization circuity. In this paper a novel firing circuit is proposed for thyristor switch. The proposed circuit is implemented by using digital components(FPGA, A/D, and DSP etc.) on the basis of the analog cosine method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.985-988
• /
• 2001

A piezo-buzzer being used for the purpose of generation of audible frequency, which is a electric-acoustic transducer utilizing the inverse piezoelectric effect. Also it can be used for a pressure sensor according to the piezoelectric effect. But the output of a piezo-buzzer is a differential signal. In this study, we've made a system that can measure a real pressure by integration of output signal. According to our results, it could be found a possibility of application for pressure sensor by measurement of output characteristics when a piezo-buzzer was pressurized and depressurized, and by measuring of an error by means of the drift current of OP-Amp, etc..