• 한국주조공학회지
• /
• 제20권2호
• /
• pp.122-128
• /
• 2000

Strip casting process is a new technology that makes a near net shape thin strip directly from molten metal. With this process, a large amount of energy and casting cost could be decreased from the abbreviation of reheating and/or hot rolling process. Ductile cast iron which has spheroidal graphite in the matrix is the most commercial and industrial material, because of its supreme strength, toughness, and wear resistance etc. But it cannot be produced to the thin strip owing to difficulty in rolling of ductile cast iron. In this study, ductile cast iron strips are produced by the twin roll strip caster, with different chemical compositions of C, Si, and Mn contents. And then heat-treated, microstructures and mechanical properties are examined. The microstructures of as-cast strip are that of white cast iron which consists of the mixture of cementite and pearlite, but the equiaxed crystal zone of the pearlite or segregation zone of cementite exists in the center region of the strip thickness, which cannot be observed in the rapidly solidified metallic mold cast specimens. This structure is supposed to be formed from the thermal distribution of strip and the rolling force. Comparing with the structures of each strips after heat treatment, increasing Si content makes smaller spheroidal graphite and more compact in the matrix, furthermore the less of Mn content makes the ferrite matrix be obtained clearer and easier. As a result of the tensile test of graphitization heat-treated strips, the yield strengths are about 250 MPa, the tensile strengths are about $430{\sim}500$ MPa, and the elongations are about $10{\sim}13%$. In the case of the strip which has the smaller and more compact spheroidal graphite in the ferrite matrix, the higher tensile strength and better drawability could be obtained.

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.511-520
• /
• 2000

초음파 펄스-에코법을 매우 얇은 층을 갖는 다층구조물에 적용할 때 그 얇은 층의 상하면에서의 반사파가 중첩되게 되면 검사가 곤란하게 된다. 이런 문제는 반도체 내부에서의 심한 감쇠를 피하기 위해 20MHz 이하의 비교적 저주파수를 사용하는 초음파 현미경으로 반도체의 얇은 실리콘 칩을 검사하는 경우에 쉽게 볼 수 있다. 기존에 이런 초음파 신호의 중첩을 분리하기 위해 디컨볼루션 기법이 사용되어 왔으나, 송신파의 파형이 전파하면서 왜곡되어 수신되는 경우에는 적절치 못하다. 본 논문에서는 기존의 디컨볼루션 기법에 비하여 우수한 성능으로 중첩 신호를 분리해 낼 수 있는 새로운 신호처리 기법으로서 웨이브렛 변환 기반 디컨볼루션 (WTBD) 기법을 제안하였다. 여기서 웨이브렛 변환은 송신파와 왜곡된 수신 신호의 공통 파형을 추출하기 위해 사용되고 추출된 공통 파형에 대해 디컨볼루션 처리한다. 제안하는 방법의 성능은 모형신호에 대한 컴퓨터 시뮬레이션과 인위적으로 실리콘 칩 상면에 들뜸 결함을 만든 반도체 시편에 대한 실험을 통해 검증되었다.

• 패션비즈니스
• /
• 제9권6호
• /
• pp.12-28
• /
• 2005

The purpose of this study is to help develop high quality brassieres with functionality and comfort, fitting adolescents' physical features during their growth period. This study conducts a comparative analysis of juvenile brassiere and adult brassiere to identify the problems of brassieres in the market. The raw data for this study was processed by SPSS 10.1. The results of this study are summarized as follows: 1. The results of this survey show that the girls' satisfaction of their breasts has correlations between breast protrusion degree and volume. The girls think that if they have protrusive breasts their breast volume is big, and their breast satisfaction level shows high. 2. The results show that the objective of brassiere wearing is to prevent breasts sag and rupture, make good breast shape, balance their entire body shape, and make beautiful outer garment line. Brassiere functions are to prevent jiggle of breasts, make a good body line, and cover the nipples. For the grader school students, they are wearing brassiere to make a good balanced body and as their breasts developed, they are wearing brassiere for beautiful body shape not just to cover up their breasts. 3. In regard to brassiere cup size recognition, as students have higher grade at school, they have better recognition abouxt their cup size. As they are better aware of their cup size, they have better satisfaction with their cup size. Therefore, choosing the right size of brassiere for their bust is very important. 4. Girl students' brassiere preference shows that 317 students (56.9%) prefer white for brassiere colors, following pink and flesh color. Their most preferred brassiere material is cotton (354 people, 63.6%) because cotton is not sensitive even for weak skin. For brassiere style, 273 students (49%) prefer round style, following spots and mold. Their most preferred brassiere style is stake. In addition, brassiere should not press their breasts because their breasts are developing during puberty period.

• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.76-84
• /
• 2021

In this study, an optimal stiffness model of the C-frame, which was supporting the mold and tool load, was proposed to obtain quality self-piercing riveting (SPR) joining. First, the load path acting on the C-frame structure was identified using topology optimization. Then, a final suggested model was proposed based on the load path results. Stiffness and strength analyses were performed for a rivet pressing force of 7.3 [t] to compare the design performance of the final proposed model with that of the initial model. Moreover, to examine the reliability of continuous and repeated processes, vibration analysis was performed and the dynamic stiffness of the final proposed model was reviewed. Additionally, fatigue analysis was performed to ascertain the fatigue characteristics due to simple repetitive loading. Finally, stiffness test was performed for the final proposed model to verify the analysis results. The obtained results differed from the analysis result by 2.9%. Consequently, the performance of the final proposed model was superior to that of the initial model with respect to not only the SPR fastening quality but also the reliability of continuous and repetitive processes.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.521-528
• /
• 2021

진공 압출성형 방법에 의하여 생산되는 섬유 시멘트 복합체는 연속 생산이 가능하고 고밀도 무기질 재료의 구성이 가능한 제품이다. 보강섬유로 사용하고 있는 폴리프로필렌과 펄프의 연소에 따른 가스의 발생과 이로 인하여 불연성능 시험 중 중심부에 지속적으로 불꽃이 발생하여 성능을 충족하지 못하는 경우가 발생한다. 본 연구에서는 불연 특성 개선을 위하여 내알칼리 성능을 개선한 ARG(Alkali resistant glass)섬유를 보강섬유로 사용하여 시험체를 제조하고 성능 평가를 실시하였다. 섬유량은 부피비를 기준으로 하여 적용하였다. 측정결과 폴리프로필렌을 전량 유리섬유로 대체하고 펄프 사용량을 50% 감소하여 배합할 경우 불꽃은 발생하지 않거나 5초 이내 소화 되는 것을 확인하였다. 패널의 압출성과 생산성, 그리고 경화 후 적정한 인성 및 취성재료의 개선을 위하여 펄프 사용량은 기존 사용량의 50%를 유지하는 것이 바람직하며, 불연성능의 개선을 위하여 별도의 결합재 변경은 필요하지 않은 것으로 확인되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권12호
• /
• pp.1903-1912
• /
• 2018

Objective: To evaluate the effect of lactic acid bacteria and storage temperature on the microbial, chemical and mycotoxin composition of corn silage. Methods: Corn was harvested at 32.8% dry matter, and chopped to 1 to 2 cm. The chopped material was subjected to three treatments: i) control (distilled water); ii) $1{\times}10^6$ colony forming units (cfu)/g of Lactobacillus plantarum; iii) $1{\times}10^6cfu/g$ of Pediococcus pentosaceus. Treatments in triplicate were ensiled for 55 d at $20^{\circ}C$, $28^{\circ}C$, and $37^{\circ}C$ in 1-L polythene jars following packing to a density of approximately $800kg/m^3$ of fresh matter, respectively. At silo opening, microbial populations, fermentation characteristics, nutritive value and mycotoxins of corn silage were determined. Results: L. plantarum significantly increased yeast number, water soluble carbohydrates, nitrate and deoxynivalenol content, and significantly decreased the ammonia N value in corn silage compared with the control (p<0.05). P. pentosaceus significantly increased lactic acid bacteria and yeast number and content of deoxynivalenol, nivalenol, T-2 toxin and zearalenone, while decreasing mold population and content of nitrate and 3-acetyl-deoxynivalneol in corn silage when stored at $20^{\circ}C$ compared to the control (p<0.05). Storage temperature had a significant effect on deoxynivalenol, nivalenol, ochratoxin A, and zearalenone level in corn silage (p<0.05). Conclusion: Lactobacillus plantarum and Pediococcus pentosaceus did not decrease the contents of mycotoxins or nitrate in corn silage stored at three temperatures.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.45-49
• /
• 2019

높은 신뢰성의 n형 Bi-Te-Se계 열전소자 제조를 위한 열간압출 공정을 확립하였다. 용융-응고 공정을 이용하여 Bi-Te-Se 원료잉곳을 합성하였으며, 고에너지 볼밀을 이용하여 평균 ${\sim}30{\mu}m$ 크기의 분말로 분쇄하였다. 일축가압 공정으로 분말을 직경 20 mm의 디스크 형태로 성형한 후 압출용 몰드 설계-제작 및 열간압출 공정 온도와 압력을 제어하여 성형체로부터 00l 방향으로 결정 배향된 지름 1.8 mm의 원통형 고밀도 압출체를 제조하였다. 상온에서 최대 ${\sim}4.1mW/mK^2$의 높은 파워팩터를 나타냈으며, zone melting 공정으로 제조한 상용 열전소재와 비교하여 2배 이상 향상된 기계적 강도 (~50 MPa)를 구현하였다.

• 융합정보논문지
• /
• 제9권4호
• /
• pp.8-13
• /
• 2019

본 논문은 지역의 문화콘텐츠의 제작기술과 인프라를 기반으로 스토리텔링 중심의 캐릭터 브랜드 상품의 부재로 인하여 지역 문화자원의 재구성 및 상품화가 필요하다고 판단되어 전통적 문화소재인 캐릭터를 발굴하여 문화산업 기념품으로 개발하였다. 스토리텔링 기반의 캐릭터 상품 개발에 대한 차별화 전략을 통해 발전된 사업기반을 확립할 수 있는 토대가 되어, 다양한 콘텐츠 제작의 밑거름과 더불어 발전된 도예 상품들의 공급 확대에 기여할 것으로 보여 진다. 또한, 수작업 기반의 제작으로 인해 소량 생산만 가능하고 제작기간이 길어지는 반면 3D 프로그램 및 3D 프린팅을 통한 목업 제작으로 석고 틀 제작 기간이 단축되었으며, 대량생산의 발판이 마련되어 기존의 전통적인 도자기 인형에서 벗어나 다양하고 풍부한 도자기 제품 개발에 효과가 있었다.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.36-42
• /
• 2022

Globally, as population growth and economic development continue, resource consumption is increasing rapidly. As an alternative to electric vehicles was suggested as the environmental pollution problem emerged, the number of registered electric vehicles in Korea increased by more than 137 times compared to 2013. Secondary batteries are expected to expand into various markets such as small IT devices and electric vehicles, and the most important part of electric vehicles is the battery (secondary battery). Therefore, in this study, to analyze the stability of the CSM (Classifier Separator Mill) grinding disc that crushes secondary battery raw materials, structural analysis and vibration analysis of the 1st to 4th grinding discs and the final model were performed. The change of bending by the weight of the Grinding Disc is at least 0.065㎛ and maximum 0.075㎛, and the change by the standard gravity is judged to be very low. The strain is at least 0.00031㎛/㎛ and maximum 0.00078㎛/㎛, and even if the number of Hamer increases, the change by the weight is judged to be insignificant. When the Grinding Disc rotates at a maximum of 6000rpm, the deformation and deformation rate of the first to third models are similar, but the fourth model (Hamer 10EA) is more than three times and the final model (Hamer 12EA) is about four times. However, the maximum deformation is 28.21㎛, which is considered to be insignificant when the change is 6000rpm. Six modes of natural Frequency analysis of the 1st~4th order and final model of the grinding disc appeared to be bent or twisted.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.86-92
• /
• 2004

본 연구는 백탄보드와 오버레이 백탄보드를 비포름알데히드계 수지 접착제를 사용하여 습식공법으로 제조하고, 백탄보드의 포장용 상자로서의 기능을 검토하기 위하여 에칠렌가스 흡착과 딸기의 보관성을 측정하였다. 그결과, 백탄보드의 에칠렌 가스 흡착성능은 종이보다 월등히 좋았고 백탄 자체보다 높았으며, 오버레이 백탄보드와 비오버레이 백탄보드간 가스흡착성능은 차이가 없었다. 종이상자와 PVC상자 내 딸기와 백탄보드상자 내 딸기의 잿빛곰팡이 발생시간을 비교한 결과, 각각 2일 후, 4일 후로 나타났으며 박엽지와 부직포 사이의 흡착성의 차이도 역시 없었고, 백탄보드의 보관성 효과가 약 2배 좋았다. 결과적으로 백탄보드의 종류(혼합형, #40-60형)나 박엽지와 부직포 오버레이 백탄보드간의 신선도 유지효과의 차이는 없었다.