Browse > Article

A study on structural analysis of GRINDING DISC ASS'Y for secondary battery material decompositiom  

Yun, Dong-Min (Department of Fire Protection Engineering, Sangji University)
Jeon, Yong-Han (Department of Fire Protection Engineering, Sangji University)
Publication Information
Design & Manufacturing / v.16, no.1, 2022 , pp. 36-42 More about this Journal
Abstract
Globally, as population growth and economic development continue, resource consumption is increasing rapidly. As an alternative to electric vehicles was suggested as the environmental pollution problem emerged, the number of registered electric vehicles in Korea increased by more than 137 times compared to 2013. Secondary batteries are expected to expand into various markets such as small IT devices and electric vehicles, and the most important part of electric vehicles is the battery (secondary battery). Therefore, in this study, to analyze the stability of the CSM (Classifier Separator Mill) grinding disc that crushes secondary battery raw materials, structural analysis and vibration analysis of the 1st to 4th grinding discs and the final model were performed. The change of bending by the weight of the Grinding Disc is at least 0.065㎛ and maximum 0.075㎛, and the change by the standard gravity is judged to be very low. The strain is at least 0.00031㎛/㎛ and maximum 0.00078㎛/㎛, and even if the number of Hamer increases, the change by the weight is judged to be insignificant. When the Grinding Disc rotates at a maximum of 6000rpm, the deformation and deformation rate of the first to third models are similar, but the fourth model (Hamer 10EA) is more than three times and the final model (Hamer 12EA) is about four times. However, the maximum deformation is 28.21㎛, which is considered to be insignificant when the change is 6000rpm. Six modes of natural Frequency analysis of the 1st~4th order and final model of the grinding disc appeared to be bent or twisted.
Keywords
Grinding Disc; Structural analysis; Dynamic Structure; Natural Frequency;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Yang, B.Y., Kim, S.H., Choi, S.G., Choi, U.G., Jang, Y.J., Yoon, T.H., Back, S.Y. "A study on the structural analysis of CNC multiple router system", J. Korea Society of Die & Mold Engineering, Vol. 9, No. 3, 2015.
2 Na, I.K., Goo, B.C. "Analysis and measurement of the natural modes of a C/C brake disc", JOURNAL OF THE KOREAN SOCIETY FOR RAILWAY Journal of the Autumn Conference, 972-976, 2013.
3 Kim, Y.H., Lim, J.W., Park, G.Y., Lim, O.T. "Electric Vehicle Market and Battery Related Technology Research Trends", Trans. of Korean Hydrogen and New Energy Society, Vol. 30, No. 4, pp. 362-368, 2019.   DOI
4 Park, J.Y., Kim, H.G., Kim, C.S. "Understanding Electric Vehicle Consumer in Korea Market Based Upon User and Prospective Survey", Journal of the Korea Convergence Society, Vol. 10. No. 6, pp. 191-201, 2019.   DOI
5 Wi, E.C., Ko, M.S., Kim, H.J., Kim, S.C., Lee, J.H., Back, S.Y. "A study on structural stability of Backgrinding equipment using finite element analysis", J. Korea Society of Die & Mold Engineering, Vol. 14 No. 4, 2020.
6 Shin, D.Y., Ahn, H.J. "Research Trends of Cathode Materials for Lithium-Ion Batteries used in Electric Vehicles", J. Korean Powder Metall. Inst., Vol. 26, No. 1, pp. 58-69, 2019.   DOI
7 Shin, S.I., Ha, M.W., Lee, B.G. "Evaluation of Electrochemical Properties Depending on Cathode Active Material Blending in Lithium-ion Battery", The Korean Institute of Electrical Engineers Journal of the Summer Conference, pp. 15-17, 2020.