• 대한소아치과학회지
• /
• 제33권4호
• /
• pp.722-727
• /
• 2006

치아가 정상적으로 맹출해야 하는 시기를 지나서도 골조직 내에서 맹출하지 않을 수 있으며, 이러한 치아를 매복치라 한다. 유치의 매복은 드물게 나타나며, 더구나 과거의 문헌 고찰에 의하면 현재까지 보고된 계승 영구치 하방에 매복된 유치는 극히 드물다. 대부분의 경우 매복된 유치는 제 2 유구치이다. 유치의 매복에 대한 병인은 유치 치배의 비정상적인 발달로 인해 조기에 유착이 일어나는 것으로 추측되어지고 있으나, 아직까지 정확하게 밝혀진 바는 없다. 전위는 동일한 사분악 내의 인접한 두 개 치아의 위치가 서로 바뀐 것을 말하며, 영구 상악 견치와 제 1소구치 사이에 가장 많이 발생한다. 그 빈도는 1% 내외로 낮으며, 특히 유치열의 전위는 거의 발표된 바가 없다. 본 증례는 양악 양측 제 2유구치의 매복을 주소로 본과에 의뢰된 환자의 구강 및 방사선 검사 결과 매복된 제 2유구치와 후속 제 2소구치 사이의 수직 전위가 관찰되었기에 보고하는 바이다.

• 구강회복응용과학지
• /
• 제33권1호
• /
• pp.25-33
• /
• 2017

매복된 하악 제2대구치의 임상적 증상은 제3대구치의 매복 상황과 유사하나 발치가 주된 치료법인 제3대구치와 달리 저작기능의 회복, 대칭적인 안면 성장, 치열궁의 대칭성 유지, 안정된 교합관계 회복등을 위하여 가능한 직립하여야 한다는 점에서 치료 방법이 다르다. 매복 하악 제2대구치의 직립 치료시 치질의 노출 정도, 직립에 방해되는 제3대구치의 존재여부, 제2대구치의 예후, 대합치의 정출여부 등에 따라 치료 전략이 달라야 하며, 이러한 전략에 따라 사용하는 장치와 고정원의 종류도 결정된다. 심미적 개선은 기대하기 어렵지만, 저작기능을 회복하고 치아우식증, 치주질환, 악관절 장애등 여러 문제를 예방할 수 있는 하악 제2대구치 직립은 기능회복과 질환의 예방이라는 관점에서 중요한 치료이다.

• 대한소아치과학회지
• /
• 제30권3호
• /
• pp.495-501
• /
• 2003

매복은 임상적 또는 방사선학적으로 인식할 만한 맹출로의 장애물이나 잘못된 치배의 위치로 인하여 치아의 맹출에 진전이 없는 것을 말한다. 제 3 대구치와 상악 견치를 제외하고 제 2 소구치에서 가장 흔히 매복이 발생하며, 소구치의 매복은 전체 매복의 0.5%를 차지한다. 소구치 매복의 치료에는 교정적 견인과 외과적 재위치가 필요할 수도 있지만, 만기 잔존된 유구치에 의해 발생한 소구치 매복은 유구치의 발거 및 공간 유지로서 소구치의 맹출을 유도할 수 있다. 본 증례는 제 2 소구치의 미맹출을 주소로 경북대학교병원 소아치과에 내원한 환아에서 만기 잔존된 제 2 유구치를 발거하고 공간 유지를 하여 제 2 소구치의 자발적 맹출을 시도하였는 바 다음과 같은 결과를 얻을 수 있었다. 1. 만기 잔존된 제 2 유구치와 연관된 매복된 제 2 소구치는 유치 발거를 통한 최소한의 치료로 양호한 결과를 얻을 수 있다. 2. 제 2 소구치가 맹출할 때까지 적절한 공간 유지와 정기적인 방사선 검사가 필요하다. 3. 교정적 견인 또는 외과적 재위치를 시도하기 전 치아의 이동을 확인하기 위한 충분한 시간이 허용되어야 한다. 4. 치근이 미완성된 치아에서 좀 더 성공적인 결과를 얻을 수 있다.

• 대한치과교정학회지
• /
• 제34권3호
• /
• pp.219-227
• /
• 2004

본 연구의 목적은 치아의 이동양상을 관찰하기 위해 고안된 Calorific machine system(typodont simulation system)과 precision TPA를 이용하여, 근심 회전된 (mesial-in rotation) 상악 대구치를 회전 (derotation)시킨 후 해당 치아 및 반대측 고정 원의 공간변화를 확인하기 위함이다. 우측 상악 제 1대구치를 고정원으로 사용하였고 좌측 상악 제 1대구치를 근심 회전된 치아로 사용하였으며, TPA에 부여한 회전각은 $20^{\circ},\;40^{\circ},\;60^{\circ}$였다. 먼저 수동형의 precision TPA를 제작한 후, TPA의 왼쪽 삽입부위(tag)를 각각 $20^{\circ},\;40^{\circ},\;60^{\circ}$로 구부려 실험하였다. 각 군별 실험은 동일한 조건에서 5회 반복한 후 ANOVA와 Tucky's Studentized Range (HSD) test로 검정 하였다. 실험 결과, 교합면에서는 precision TPA의 구부리는 각도가 증가할수록 회전된 구치의 원심 설측 교두가 근심 설측 방향으로 움직이는 동안, 근심 협측 교두는 협측으로 더 많이 움직였고(p<0.001) 원심방향으로는 더 적게 움직였다. (p<0.001) 시상면에서 회전 구치의 구개측 치근은 더욱 근심으로 움직였다. (p<0.001) 횡단면에서는 회전된 치아가 약간의 정출을 보였다(p<0.001). 고정원으로 사용된 우측 상악 제1대구치는 세 평면에서 의미 있는 변화를 보이지 않았다.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.77-90
• /
• 1990

The purpose of this study was to compare the amount of the vertical pin opening of $33^{\circ}$ resin and $0^{\circ}$ resin teeth during processing and to determine whether the changes in tooth contacts by using articulation ribbon and T-Scan system follow any identifiable pattern, and to determine if there is any correlation between the changes in tooth contacts and the amount of the vertical pin opening after processing. Through statistical analyses on the data from this study, the following conclusions were obtained. 1. The amounts of the vertical pin opening were 0.78m, 0.87mm for $0^{\circ}$ teeth and $33^{\circ}$ teeth, respectively. But there was no significant difference between them. 2. The total number of contact points recorded by articulating ribbon after processing was decreased to 442.5% of that before processing. 3. The mean values for the number of contact points per tooth recorded by articulating ribbon after processing were 4.3 for the second molar, 3.8 for the first molar, 1.3 for the second premolar, 0.8 for the first premolar. The reduction of contact points per tooth became greater moving in an anterior direction. 4. The correlation between the reduction of contact points and the amount of the pin opening after processing was not significant. 5. The mean values for the numbers of contact points per tooth recorded by T-Scan system after processing were 2.2, 2.5, 1.0, and 0.5 at the second molar, the first molar, the second premolar, and the first premolar, respectively. 6. The correlation between the number of contact points by using articulating ribbon and TScan system after processing was not significant.

• The Journal of Advanced Prosthodontics
• /
• 제12권1호
• /
• pp.1-8
• /
• 2020

PURPOSE. To investigate the influence of crown material (lithium-disilicate, 3Y-TZP zirconia) and abutment type (rigid implant, resin tooth with artificial periodontium) on wear performance of their antagonist teeth and adjacent teeth. MATERIALS AND METHODS. A mandibular left first molar (#36) with adjacent human teeth (mandibular left second premolar: #35, mandibular left second molar: #37) and antagonistic human teeth (maxillary left second premolar: #25, maxillary left first molar: #26, maxillary left second molar: #27) was prepared simulating a section of the jaw. Samples were made with extracted human molars (Reference), crowned implants (Implant), or crowned resin tooth analogues (Tooth). Crowns (tooth #36; n = 16/material) were milled from lithium-disilicate (Li, IPS e.max CAD) or 3Y-TZP zirconia (Zr, IPS e.max ZirCAD, both Ivoclar Vivadent). Thermal cycling and mechanical loading (TCML) in the chewing simulator were applied simulating 15 years of clinical service. Wear traces were analyzed (frequency [n], depth [㎛]) and evaluated using scanning electron pictures. Wear results were compared by one-way-ANOVA and post-hoc-Bonferroni (α = 0.05). RESULTS. After TCML, no visible wear traces were found on Zr. Li showed more wear traces (n = 30-31) than the reference (n = 21). Antagonistic teeth #26 showed more wear traces in contact to both ceramics (n = 27-29) than to the reference (n = 21). Strong wear traces (> 350 ㎛) on antagonists and their adjacent teeth were found only in crowned groups. Abutment type influenced number and depth of wear facets on the antagonistic and adjacent teeth. CONCLUSION. The clinically relevant model with human antagonistic and adjacent teeth allowed for a limited comparison of the wear situation. The total number of wear traces and strong wear on crowns, antagonistic and adjacent teeth were influenced by crown material.

• 대한치과교정학회지
• /
• 제34권5호
• /
• pp.465-472
• /
• 2004

빠르며 정확하고 안전한 치아이동을 목표로 삼고 있는 교정치료에서 새로운 패러다임이라고 여겨지는 피질골 절제술과 견인 골형성술을 응용한 구치의 원심직립이동에 대하여 알아보았다. 일반적인 방법으로는 어렵거나 치료 기간이 길어질 것으로 판단되는 구치의 원심직립 이동을 피질골 절제술과 견인 골형성술을 응용하여 도모하였다 각각의 원심직립 증례를 통해 피질골 절제술과 견인 골형성술의 적용 술식, 견인장치 등을 논하고 그 효과를 파악하였다. 빠른 치아이동과 이에 따른 교정치료 기간의 단축이 가능하고 통상의 교정치료로는 이동에 한계가 있었던 치아이동을 구치의 정출이나 고정원의 상실 없이 도모할 수 있었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권2호
• /
• pp.110-115
• /
• 2012

Ankylosed tooth is defined as 'the discontinuance of normal passive tooth eruption without any mechanical barrier'. Ankylosed tooth treatment is a challenge to dental clinicians. In treatment of maxillary molar ankylosis cases there are risks of oro-antral fistula, displacement of root fragments into the maxillary sinus, as well as the necessity for providing additional sinus bone augmentation for future implant placement. In this study, we suggested a new technique using a piezoelectric device and a lateral side approach to the maxillary sinus leading to the simultaneous removal of the ankylosed maxillary molar and sinus grafting for the purpose of implant site development.

• Restorative Dentistry and Endodontics
• /
• 제45권3호
• /
• pp.27.1-27.9
• /
• 2020

Apical surgery for a mandibular molar is still challenging for many reasons. This report describes the applications of computer-guided cortical 'bone-window technique' using piezoelectric saws that prevented any nerve damage in performing endodontic microsurgery of a mandibular molar. A 49-year-old woman presented with gumboil on tooth #36 (previously endodontically treated tooth) and was diagnosed with chronic apical abscess. Periapical lesions were confirmed using cone-beam computed tomography (CBCT). Endodontic microsurgery for the mesial and distal roots of tooth #36 was planned. Following the transfer of data of the CBCT images and the scanned cast to an implant surgical planning program, data from both devices were merged. A surgical stent was designed, on the superimposed three-dimensional model, to guide the preparation of a cortical window on the buccal side of tooth #36. Endodontic microsurgery was performed with a printed surgical template. Minimal osteotomy was required and preservation of the buccal cortical plate rendered this endodontic surgery less traumatic. No postoperative complications such as mental nerve damage were reported. Window technique guided by a computer-aided design/computer-aided manufacture based surgical template can be considerably useful in endodontic microsurgery in complicated cases.