• International Journal of Reliability and Applications
• /
• v.2 no.3
• /
• pp.189-197
• /
• 2001

The estimation of mean lifetimes in presence of interval censoring with mixed replacement procedure is examined when the distributions of lifetimes are exponential. It is assumed that, due to physical restrictions and/or economic constraints, the number of failures is investigated only at several inspection times during the lifetime test; thus there is interval censoring. The maximum likelihood estimator is found in an implicit form. The Cramor-Rao lower bound, which is the asymptotic variance of the estimator, is derived. The estimation of mean lifetimes for competing failures model has been expanded.

• Tribology and Lubricants
• /
• v.16 no.6
• /
• pp.448-454
• /
• 2000

The roughness effects are very important due to the presence of interacting asperities in partial lubrication regime. An average Reynolds equation using flow factors is very useful to determine the effects of surface roughness on mixed lubrication. In this paper, the pressure flow factors for surfaces having Gaussian and non-Gaussian distribution of roughness height are evaluated in terms of various kurtosis. The effect of kurtosis on pressure flow factors is investigated using random rough surface generated numerically. The pressure flow factor increases with increasing kurtosis in mixed lubrication regime (h/$\sigma$<3). As h/$\sigma$ increases, the pressure flow factors approach to 1 asymptotically regardless of kurtosis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.353-354
• /
• 2009

The different sized slag powder, which have been used widely as a cement binder, was obtained by using 3 kind of mills. Two kinds of slag powder with different size was mixed and then investigated the relationship between the rheological properties and the particle packing ratio or particle distribution. It was found that the rheological properties of two mixed slag powder was proportional to the particle packing ratio of it. And the paste flowability of the mixed slag powder with wide particle distribution was very good.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.380-382
• /
• 2002

An important aspect of the study of power system markets involves the assessment of strategic behavior of participants for maximizing their profits. In models of imperfect competition of a deregulated electricity system the key task is to find the Nash equilibrium. In this paper, the bimatrix approach for finding Nash equilibria in electricity markets is investigated. This approach determines pure and mixed equilibria using the complementarity pivot algorithm. The mixed equilibrium in the matrix approach has the equal number of non-zero property. This property makes it difficult to reproduce a smooth continuous distribution for the mixed equilibrium. This paper proposes an algorithm for adjusting the quantization value of discretization to reconstruct a continuous distribution from a discrete one.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.201-209
• /
• 2003

In the mixed lubrication regime, the roughness effects are very important due to the presence of interacting asperities. An average Reynolds equation using flow factors is very useful to determine effects of surface roughness on mixed lubrication. In this paper, the pressure flow factors and shear stress factor for Gaussian and non-Gaussian surfaces are evaluated in terms of kurtosis and skewness. particularly, the elastic deformation of the surface is considered.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.85-107
• /
• 1993

The cosmetic fine powders were mixed with variation of mixing time(5) in the mixers (ribbon mixer, powder mixer, micropulverizer and fine impact mill). The powders were nixed with small amount of ferric oxide. as tracer. The mixed powders ere measured the particle size distribution, specific surface area and surface color with mixing time (s). The color variation, particle size distribution and specific surface area of the mixed powder exist a relationship with mining time(s) that can be expressed as mathematical equations to show the degree of the mixing of the powder mixture. The linear velocity of the impellar tip is the main factor contributing to he mixing efficiency of the mixers un this study. According to the linear velocity, he mixers used are devieded as convection mixing (ribbon mixer), sclera mixing powder mixer) and diffusion mixing (micropulverizer/fine impact mill).

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.591-596
• /
• 2006

In order to analyze the tailorbility of different fabrics for men's suit, FAST system has been used for measuring the distribution of mechanical properties in this study. As results, cashmere mixed woolen fabrics showed the minimum degree in relaxation shrinkage, formability, and shear rigidity than any other fabrics, and also showed more than 6% as maximum level of extensibility. Thus, cashmere mixed woolen fabrics requires careful tailoring in lay-out, marking, and cutting. It is necessary to establish new tailoring criteria for automatic sewing with cashmere mixed woolen fabrics than any other fabrics, because they show more failure rate of tailorbility. There have been noticeably more variation of shrinkage and extension for woolen fabrics with cashmere mixed than 100% woolen fabrics by evaluating the formability of the suits when these are completed to suits through cutting and tailoring from fabrics. Especially nylon mixed woolen fabrics showed shrinkage overall, but polyester mixed woolen fabrics showed extension at waist area. Thus, it is necessary to adjust the appropriate overfeed rate considering the amount of shrinkage and extension while tailoring.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.172-180
• /
• 2006

This study was to analyze the effect of mixed fuel composition and mass fraction on the characteristics of evaporating diesel spray and combustion under the various ambient conditions. The characteristics of vaporization distribution and combustion were visualized by laser induced fluorescent method and direct photography. The experiments were conducted in the constant volume vessel and rapid compression expansion machine with optical access. Multi-component fuels mixed i-octane, n-dodecane and n-hexadecane were injected the vessel and rapid compression expansion machine with electronically controlled common rail injector. Experimental results show that fuel vapor formed stratified distribution. And vaporization and diffusion are become actively increasing in mass fraction of low boiling point component. Consequently multi-component fuels were expected to control the evaporating behavior according to their suitable mass fraction.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.1
• /
• pp.92-100
• /
• 2009

Today international trade through maritime transportation is significantly increasing. Due to this increase, shipping companies are faced with problems concerning the repositioning of empty containers from import dominant ports. The liner shipping service network has been provided to transport containers which load customers' freights. Container ships are moved on the liner shipping service network by observing the predetermined route and transportation time. This research deals with the empty containers distribution problem considering the container ship route. A mathematical model based on the mixed integer program has been introduced in this study. The objective is to minimize the total relevant costs of empty containers such as handling, leasing, and inventory holding, etc. Due to the complexity of the problem, a genetic algorithm has been suggested to solve large sized problems within a reasonable time. Numerical experiments have been conducted to show the efficiency of the genetic algorithm.

• The Korean Journal of Ecology
• /
• v.22 no.2
• /
• pp.65-68
• /
• 1999

In December-January of 1996-1997 and 1997-1998, information was gathered about vertical distribution of foraging sites of tits in 34 flocks in coniferous and deciduous forests. There was a significant effect of forest type on the distribution of foraging sites of each species. Habitat was classified into 5 height layers vertically: ground, bushes (usually＜1.5 m, up to 3 m), tree layer 1 (up to 1/3 of tree height), tree layer 2 (1/3-2/3 tree height). and tree layer 3 (＞2/3 tree height). There were differences among species: great tit (Parus major) foraged mostly on the ground, coal tit (P. ater) and long-tailed tit (Acrocephalus caudatus) - on the highest tree layer, marsh tit (P. palustris) was often seen on bushes, and varied tit (P. varius) - in tree layer 2. Smaller species used upper and outer parts of trees. suggesting that, like in most other similar studies. larger dominant species prevented smaller species from using inner parts of trees.