• Korean Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.228-236
• /
• 2008

The purpose of this study was to evaluate fish metric attributes using a model of Lentic Ecosystem Health Assessment (LEHA) and apply the model to the dataset sampled from six sites of Namyang Reservoir during October 2005$\sim$May 2006. The model was composed of 11 metries and the metric attributes were made of physical, chemical and biological parameters. Trophic composition's metrics showed that tolerant species ($M_3$, 80%) and omnivore species ($M_4$, 92%) dominated the fish fauna, indicating a biological degradation in the aquatic ecosystem. The metric of $M_7$, relative proportions of exotic species, also showed greater than 8% of the total, indicating a ecological disturbance. The average value of LEHA model was 24.3 (n= 12) in the reservoir, indicating a "poor condition" by the criteria of An and Han (2007). Spatial variation based on the model values was low (range: $21{\sim}26$), and temporal variation occurred due to a monsoon rainfall. Electrical conductivity (EC) and tropic state index of chlorophyll-$\alpha$ [TSI(CHL)] was greater in the premonsoon than the postmonsoon.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.21-24
• /
• 2001

For very large multimedia traffic to be supported successfully in wireless network environment, it is necessary to provide Quality-of-Service(QoS) guarantees between mobile hosts(clients). In order to guarantee the Qos, we have to keep the call blocking probability below target value during handoff session. However, the QoS negotiated between the client and the network may not be guaranteed due to lack of available channels for traffic in the new cell, since mobile clients should be able to continue their on-going sessions. In this paper we propose a efficient load-balancing algorithm based on the adaptive bandwidth reservation scheme for enlarging available channels in a cell. We design a new method to predict the mobility of clients using MPT(mobility profile table). This method is then used to reserve a part of bandwidths for handoff calls to its adjacent cells and this reserved bandwidth can be used for handoff call prior to new connection requests. If the number of free channels is also under a low threshold value, our scheme use a load-balancing algorithm with a adaptive bandwidth reservation. In order to evaluate the performance of our algorithm, we measure the metrics such as the blocking probability of new calls and dropping probability of handoff calls, and compare with other existing schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.115-125
• /
• 2011

Cryptographic hash functions are also called one-way functions and they ensure the integrity of communication data and command by detecting or blocking forgery. Also hash functions can be used with other security protocols for signature, authentication, and key distribution. The SHA-1 was widely used until it was found to be cryptographically broken by Wang, et. al, 2005. For this reason, NIST launched the SHA-3 competition in November 2007 to develop new secure hash function by 2012. Many SHA-3 hash functions were proposed and currently in review process. To choose new SHA-3 hash function among the proposed hash functions, there have been many efforts to analyze the cryptographic secureness, hardware/software characteristics on each proposed one. However there are few research efforts on the SHA-3 from the point of power consumption, which is a crucial metric on hardware module. In this paper, we analyze the power consumption characteristics of the SHA-3 hash functions when they are made in the form of ASIC hardware module. Also we propose power efficient hardware architecture on Luffa, which is strong candidate as a new SHA-3 hash function. Our proposed low power architecture for Luffa achieves 10% less power consumption than previous Luffa hardware architecture.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.3
• /
• pp.191-201
• /
• 2015

Measuring and mapping connectivity among habitats is a key component of sustainable urban planning and design process. In this study, we examined how functional corridors connect forest bird habitats in a metropolitan area of Korea using graph theory-based techniques. High-quality forest habitat was defined as a function of forest cover, presence of residential areas, and road networks. We then constructed a network of high-quality forest habitats using the FunConn (functional connectivity) tools, and computed metrics ($T_i$) of patch importance based on the minimum ($Q_1$) and the 25th percentile ($Q_{25}$) rank least-cost distance values. We investigated the relative influence of two values of patch importance on forest bird species richness. As a result, the patch importance index based on the $Q_{25}$ effective distance threshold was most positively correlated with species richness (P < 0.001) after controlling for the area effect. Thus, using the $Q_{25}$ effective distance threshold, we mapped not only the locations of important habitat patches and functional corridors, but also the network backbone of forest bird habitats. The network developed in this study can help guide urban planning for biodiversity conservation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2010

The study objective was to compare the interior greening volume ratios for the change in concentration of fine particle, temperature and relative humidity, and to identify the level of interior landscape volume ratio as a suitable condition to achieve the desired indoor properties. Plants were moved into a room (88m3) randomly. After moving, the volume ratio of the interior greening level was set at 0%, 1%, 2% and 3%. The concentration of fine particles was measured with a mini-volume portable air sampler (Air Metrics, USA). The temperature and relative humidity were recorded with a digital sensor (Kiwi-LTH, USA) during the experiment under different volume ratios with three replications. 1. The results of the change in concentration of the fine particles revealed a trend towards an increased volume ratio of interior greening with decreasing concentration of fine particles, compared to non-plants (0%). The concentration of fine particles at volume ratios of 0%, 1%, 2% and 3% was 55ug/$m^3$, 233ug/$m^3$, 40ug/$m^3$ and 30ug/$m^3$, respectively. 2. The change in temperature, at volume ratios of 0%, 1%, 2% and 3% was $21.2^{\circ}C$, $17.4^{\circ}C$, $16.7^{\circ}C$ and $18.9^{\circ}C$, respectively, in near interior greening, and $22.1^{\circ}C$, $18.7^{\circ}C$, $18.4^{\circ}C$ and $20.5^{\circ}C$ respectively, at a distance of 3m from the interior greening. These study results suggested that temperature was affected by volume ratio and distance from the interior greening. 3. The relative humidity, at volume ratios of 0%, 1%, 2% and 3% was 34.2%, 32.5%, 36.7%, and 46.9%, respectively, in near interior greening, and 31.2%, 26.9%, 31.4% and 38.3%, respectively, at a distance of 3m from the interior greening. With increasing volume ratio of interior landscape, there were positive and significant results between the distance difference and the relative humidity more than temperature.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.2
• /
• pp.11-15
• /
• 2015

The Last PlannerSystem (LPS) has been implemented on construction projects to increase work flow reliability, a precondition for project performance againstproductivity and progress targets. The LPS encompasses four tiers of planning processes:master scheduling, phase scheduling, lookahead planning, and commitment / weeklywork planning. This research highlights deficiencies in the current implementation of LPS including poor lookahead planning which results in poor linkage between weeklywork plans and the master schedule. This poor linkage undetermines the ability of theweekly work planning process to select for execution tasks that are critical to projectsuccess. As a result, percent plan complete (PPC) becomes a weak indicator of project progress. The purpose of this research is to improve lookahead planning (the bridgebetween weekly work planning and master scheduling), improve PPC, and improve theselection of tasks that are critical to project success by increasing the link betweenShould, Can, Will, and Did (components of the LPS), thereby rendering PPC a betterindicator of project progress. The research employs the case study research method to describe deficiencies inthe current implementation of the LPS and suggest guidelines for a better application ofLPS in general and lookahead planning in particular. It then introduces an analyticalsimulation model to analyze the lookahead planning process. This is done by examining the impact on PPC of increasing two lookahead planning performance metrics: tasksanticipated (TA) and tasks made ready (TMR). Finally, the research investigates theimportance of the lookahead planning functions: identification and removal ofconstraints, task breakdown, and operations design.The research findings confirm the positive impact of improving lookaheadplanning (i.e., TA and TMR) on PPC. It also recognizes the need to perform lookaheadplanning differently for three types of work involving different levels of uncertainty:stable work, medium uncertainty work, and highly emergent work.The research confirms the LPS rules for practice and specifically the need to planin greater detail as time gets closer to performing the work. It highlights the role of LPSas a production system that incorporates deliberate planning (predetermined andoptimized) and situated planning (flexible and adaptive). Finally, the research presents recommendations for production planningimprovements in three areas: process related, (suggesting guidelines for practice),technical, (highlighting issues with current software programs and advocating theinclusion of collaborative planning capability), and organizational improvements(suggesting transitional steps when applying the LPS).

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.85-94
• /
• 2011

QoS(Quality of Service) is defined as "The collective effect of service performance which determines the degree of satisfaction of a user of the service" by ITU-T Rec. E.800. While the use of VoIP(Voice Over Internet Protocol) has been widely implemented, persistent problems with QoS are a very important sue which needs to be solved. This research is finding the assignment of VoIP QoS to deduct how to manage the control system and presenting the QoS control process and framework under NGN(Next Generation Network) environment. The trial framework is the modeling of the QoS measurement metrics, instrument, equipment, method of measurement, the series of cycle & the methodology about analysis of the result of measurement. This research underlines that the vulnerability of the VoIP protocol in relation to its QoS can be guaranteed when the product quality and management are controlled and measured systematically. Especially it's very important time to maintain the research about VoIP QoS measurement and control because the big conversion of new network technology paradigm is now spreading. In addition, when the proposed method is applied, it can reduce an overall delay and can contribute to improved service quality, in relation to signal, voice processing, filtering more effectively.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.932-940
• /
• 1999

Object-oriented programming is often touted as promoting software reuse. However it is recognized that objected-oriented software often need to be restructured before it can be reused. refactoring is the process that changes the software structure to make it more reusable, easier to maintain and easire to be enhanced wit new functionalities. This paper desirbes experience gained and lessons learned from restructuring OODesigner, a Computer Aided Software Engineering(CASE) tool that supports Objects Modeling Technique(OMT). this tool supports a wide range of features such as constructing object modeler of OMT, managing information repository, documenting class resources, automatical generating C++ and java code, reverse engineering of C++ and Java cod, searching and reusing classes in the corresponding repository and collecting metrics data. although the version 1.x was developed using OMT(i.e the tool has been designed using OMT) and C++, we recognized that the potential maintenance problem originated from the ill-designed class architecture. Thus this version was totally restructured, resulting in a new version that is easier to maintain than the old version. In this paper, we briefly describe its restructuring process, emphasizing the fact that the Refactoring of the tool is conducted using the tool itself. Then we discuss lessons learned from these processes and we exhibit some comparative measurements of the developed version.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.92-102
• /
• 2013

A Project Financing (PF) is a form of project delivery system that is carried out for the purpose of trying to give help to the development of national economy and the construction industry in order attract private investment. However, in the case of Korea, many PF projects are only taking into account the aspect of maximizing development benefits, and the proliferation of PF results in project failure. In addition, the interruption of business has been one after another in the aftermath of the recent financial crisis. These major cause is the result of efforts to block the potential risk of objectively quantifying operations. Nowadays, PF risk analysis in terms of various factors is insufficient. The purpose of this study is to identify and quantify the extensive risk elements to classify the cause of affecting the success of the project PF study prior to propose a methodology for evaluating the integrity of the project PF based on this and to provide a quantitative system that can evaluate the business risk. This study identified the factors that affect the PF business success and failure and establish the metrics that can be quantified through existing research and expert interviews. Factors influencing the success of the PF obtained as a result of surveys and interviews in assessing the soundness of the PF development conditions in the future be able to take advantage of, as well as an objective assessment tool to be able to take advantage of the development is expected.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.743-749
• /
• 2016

We compared two different processing methods for preparing high quality frozen in-shell baby clam products. In the first method, sand and mud were removed from the clams, then they were vacuum packed in polyethylene film, boiled at $97^{\circ}C$ for 6 min, and snap frozen in a cold air blast freezer (sample 1). The second processing method was similar, except the boiling process was excluded (sample 2). Both frozen products were boiled for 4 min, and then shucked and minced. Various quality metrics, such as the opening rates of shells, chemical composition, pH, volatile basic nitrogen (VBN), salinity, thiobarbituric acid (TBA), amino-N, total amino acids and free amino acids were measured, and sensory evaluation was conducted. The opening rates of shells of sample 1 and sample 2 were 98.3% and 4.67%, respectively. The proximate composition of sample 1 and sample 2 was 75.2% and 78.7% moisture, 19.7% and 16.2% crude protein, 2.45 and 2.2% crude lipid, 2.8% and 2.1% ash, and 2.1% and 1.9% salinity, respectively. The L, a, b and ${\Delta}E$ values were similar: 48.6 and 49.2, 3.9 and 3.9, 15.7 and 15.5, and 50.7 and 50.1 for sample 1 and sample 2, respectively. The sensory evaluation score of sample 1 was higher than that of sample 2. Sample 1 was deemed to be superior to sample 2; therefore, we determined that the boiling process is needed for manufacturing high-quality frozen clam products.