• Tribology and Lubricants
• /
• 제23권2호
• /
• pp.56-60
• /
• 2007

The main object of this study is to compare the results that have been concluded by the experiment and to estimate the temperature rise that can cause the contacting surface to be damaged. The former studies are based on the Blok and Jaeger formula. By these formulas we assume that two of the contacted objects are a kind of semi-infinite solid and with this assumption we can make a temperature analysis. But this method doesn't consider lubrication conditions and the calculation time requires a lot of time in that we have to face many difficulties in measuring the actual temperature rise. In this study we combines the semi-infinite solid method and the finite volume method to analyze the temperature of the contacting surface. And we measure temperature rise of the contact surface by dynamic thermocouple.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.131-136
• /
• 1997

It is well known that concrete is typical porous material. We pay attention to Hansen's idea that concrete may be expected to act as semi-permeable membrane, and report the effect of concentration of solution and temperature on water flux in forward osmosis. In order to measuring volume of water flux from distilled water to solution of sodium chloride through hardened cement paste, specially designed apparatus was constructed, and the following result were obtained: (1) hardened cement paste acts as semi-permeable membrane, consequently, water flux in forward osmosis may occur. (2) Rate of water flux is proportion to concentration of dilute solution, and this suggests hardened cement paste is agreeable to the theory of membrane. (3) Effect of temperature on water flux is agreeable to Arrehenius equation and is great.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2004년도 추계학술대회 논문집
• /
• pp.367-371
• /
• 2004

The purpose of this research is furnishing of basic material for acoustic planning hereafter, after understanding the acoustic merits and demerits through measuring and analyzing on room acoustic of small performance hall. As the result of the measurement, those physical evaluation indexes such as SPL, RT, EDT, $D_{50}$, $C_{80}$, RASTI have being kept the satisfiable acoustic condition for the service of performance hall. Therefore, as small performance hall is regarded as equipped with sufficient volume of sound, reverberatory feeling and diffusive feeling, it judges as an excellent performance place, also it is considered that it could be utilized as a useful material when design so similar performance hall, hereafter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.327-329
• /
• 1997

Current was generated from monolayers on a air/water surface by monolayer compression, and the measuring technique has been applied to the study on monolayers of Arachidic acid and the range of gas state, gas/fuid state and fluid state in the course of monolayer compression. Also, we measured that compression veloecity(30, 40, 50mm/min) when the sample's spread volume was about $500{\mu}{\ell}$ of sample. From the result, it is known that current is generated in the range of high surface pressures as compression velocity become faster.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1842-1846
• /
• 2008

This work reports development of novel liquid-level sensors based on the $3{\omega}$ method. The sensors determine the liquid level by measuring the thermal response as in the conventional hot-wire technique. However the sensors employ an AC heating method to enhance the sensitivity, noise resistance and time response. Also, the microfabricated thin-film structure of the sensor provides mass-producibility as well as improved sensor performance owing to the increase in the surface-volume ratio of the sensor. Two different types of the sensor are developed: one for point detection of the fluid phase and the other for monitoring continuous variation of liquid level. Notable is that the performance of the sensor is not considerably affected by the liquid flow.

• 대한공간정보학회지
• /
• 제15권4호
• /
• pp.111-116
• /
• 2007

본 연구의 목적은 DGPS와 음향측심기를 장착한 소형의 로봇선을 이용하여 저수지의 수심정보를 획득하고 이를 이용하여 정확도를 분석하는데 있다. 즉 로봇선의 속도를 변화시키고 이에 따른 속도별 수심측정의 정확도를 분석하였다. 현장실험 결과, 로봇선의 속도가 느릴수록 수심측정의 오차가 적었으며, 로봇선의 속도가 5km/hr까지는 정규분포의 신뢰구간인 95% 이내에 포함되는 것을 알 수 있었다.

• 대한수학회지
• /
• 제45권2호
• /
• pp.493-511
• /
• 2008

In this article, we study the relations of horizontally homothetic harmonic morphisms with the stability of totally geodesic submanifolds. Let $\varphi:(M^n,g)\rightarrow(N^m,h)$ be a horizontally homothetic harmonic morphism from a Riemannian manifold into a Riemannian manifold of non-positive sectional curvature and let T be the tensor measuring minimality or totally geodesics of fibers of $\varphi$. We prove that if T is parallel and the horizontal distribution is integrable, then for any totally geodesic submanifold P in N, the inverse set, $\varphi^{-1}$(P), is volume-stable in M. In case that P is a totally geodesic hypersurface the condition on the curvature can be weakened to Ricci curvature.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.515-523
• /
• 2003

Shape memory is physical phenomenon which a platically metal is restored to its original shape by a solid state phase change by heating. TiNi alloy the most effective material in the shape memory alloy(SMA). To study(measure) recovery stress of intelligent composite. Ti50-Ni50 shape memory matrix with prestrain SMA fiber. When SMA fiber of the intelligent composite is heated over austenite starting temperature(As) by electric heating. a recovery stress are generated. The recovery stress of the intelligent composite was measured by strain gage or photoelastic experiment. Measuring method of recovery stress by photoelastic experiment was developed in this research. It was certified that photoelastic experiment was more effective and more precise than strain gage method in the measurement of recovery stress.

• 한국지리정보학회지
• /
• 제10권4호
• /
• pp.14-21
• /
• 2007

일반적으로 수심측량은 해저면의 수심을 측량하는 방법이다. 해도상에 표시되는 모든 수심은 200Khz 주파수를 사용하는 에코사운더를 사용하여 측정된다. 이 연구에서는 부니층의 두께조사를 위해 이중 주파수인 33Khz와 200Khz를 사용하였다. 준설구역상에 부니층의 물량을 조사하는 방법을 알게 되며 부니층의 유무에 대한 검증을 위해 RI 테스트가 측량 후에 수행된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.141-148
• /
• 2002

Experimental investigation of the interaction between dual spray formed by swirl type injector was conducted. Experimental parameter was fuel temperature, varied in the range from $-20^{\circ}C$ to $120^{\circ}C$. Measuring parameter were vertical distance from injector tip to patternator and gap between injectors. Volumetric distiribution and SMD were measured for the various combination of parameters. The results of present study show that the arithmetic sum of each of spray is not equal to dual spray, but it is equal above specific fuel temperature. As the increases of fuel temperature, SMD decreases and becomes more uniform. As the increases of gap between injectors, fuel volume and SMD at collision area increases, but penetrated fuel decreases.