• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1132-1138
• /
• 2005

Fatigue life of metal material can be predicted by the use of fracture theory and experimental database. Although prediction of fatigue life of rubber material uses the same way as metal, there are many reasons to make it almost impossible. One of the reasons is that there is not currently used fracture criteria for rubber material beacuse of non-standardization, various way of composition process of rubber and so on. Tearing energy is one of the fracture criteria which can be applied to a rubber. Even if tearing energy relaxes the restriction of rubber composition, it is also not currently used because of complication to apply in. Research material about failure process of rubber and tearing energy was reviewed to define the process of fatigue failure and the applicability of tearing energy in estimation of fatigue life for rubber. Also, 1file element formulation of tearing energy which can be used in FE analysis was developed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.191-197
• /
• 2006

본 논문은 터널 콘크리트 구조물의 보수를 위한 무기계 균열주입기술의 표준화에 관한 연구이다. 본 연구를 위하여 균열보수공사가 필요한 터널 라이닝 및 박스 구조물을 선정하여, 균열폭에 따른 주입량, 주입시간 및 주입압력, 주입압력과 주입시간, 구조물 규모에 따른 주입량, 구조물별 균열 위치에 따른 주입량, 균열폭 및 구조물 두께와 주입시간의 관계에 관하여, 현장 조사와 시험평가를 수행하여 구조물의 종류 및 균열의 크기에 따른 균열보수재의 주입압력, 주입량 및 주입시간 등을 명확히 파악하였다.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.95-102
• /
• 1997

The technique of the calculation for probabilistic functions used in the reliability analysis of agricultural structures is proposed in this paper for adapting the standardization method using a numerical intergration. The proposed standardization method deals with the structures whose deviations of material properties and loads are large such that the deviation range from 20% to 70%. The results computed by the proposed method are compared with those obtained by the Monte Carlo Simulation. Deterministic values such as deflection, stress, obtained by conventional structural analysis can be directly changed to probabilistic distributions by the proposed method.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.485-490
• /
• 2009

The present study has been conducted to accomplish the investment and analysis, to make the construction manuals, to draw the standards, and to build quality and standards informations of the plumbing/drainage facilities materials. The application plan and the anticipation effect of this results include as follows. (1) The investment and analysis of the plumbing/drainage facilities materials is able to suggest the technology trends and the trends analysis in the construction materials. (2) The quality and standards informations of the plumbing/drainage facilities materials are possible to be the construction faculty and the cost/energy reduction in the construction materials. (3) The standards methods of the plumbing/drainage facilities materials are useful for the reliability guarantee and quality escalation in the construction materials. (4) The standard manuals of the plumbing/drainage facilities materials are applied to the specifications in the construction materials.

• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.137-140
• /
• 2009

Chromated copper arsenate (CCA), a long history of successful preservative, have raised environmental concerns. Adsorption characteristics of domestic soils for chromium, copper, and arsenic were assessed by measuring distribution coefficient ($K_d$) values of these metal components in a laboratory scale. The results revealed that $K_d$ values were higher in chromium, followed by arsenic and copper in soil matrix. Different soil matrixes resulted in varying mobilities of CCA components. The values of $K_d$ for all three metals increased with organic matter contents. The results suggest that the mobility of metal components may be very limited to the surface area adjacent to CCA-treated wood due to their fairly large distribution coefficient ($K_d$). However, the metal components would be persistent and accumulated in the soil, resulting in high chemical concentration in service area of treated wood.

• 생약학회지
• /
• 제40권2호
• /
• pp.103-108
• /
• 2009

GCSB-5 preparation is a purified extract from a mixture of 6 medicinal plants(Acanthopanacis Cortex, Achyranthis Radix, Saposhnikoviae Radix, Cibotii Rhizoma, Glycine Semen Nigra, Eucommiae Cortex) that have been widely used for the treatment of various bone disorders. The aim of this study was to investigate HPLC analysis method and screening of standard compound on Saposhnikoviae Radix for quality standardization of a medicinal crude drug GCSB-5. Standard compound of Saposhnikoviae Radix was decided with cimifugin by isolation and instrumental analysis such as NMR. HPLC analysis method for the simultaneous determination of cimifugin was established for the quality control of the medicinal plants of Saposhnikoviae Radix species, GCSB-5 raw material and preparation. And validation of HPLC analysis methods were conformed for verification of HPLC methods by check to specificity, linearity, intra-day precision, inter-day precision and accuracy following ICH guideline.

• 생약학회지
• /
• 제31권4호
• /
• pp.416-420
• /
• 2000

Ursolic acid was isolated from Prunellae Herba (Prunella vulgaris var. lilacina) and identified by direct comparison with an authentic sample. A method of analysis for the evaluation of ursolic acid was developed based on extraction of ground plant material, followed by quantitative determination using capillary gas chromatography of the TMS derivative. Quantitative analysis by GC after derivatisation under mild silylating conditions showed 0.31% ursolic acid in 20 samples collected throughout regions of Korea while no ursolic acid was detected in the samples of the whole plant of Thesium chinense, a substitute for Prunellae Herba in southern regions of Korean peninsula.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.172-177
• /
• 2004

Fatigue life prediction is based on fracture mechanics and database which is established from experimental method. Rubber material also uses the same way for fatigue life prediction. But the absence of standardization of rubber material, various way of composition by each rubber company and uncertainty of fracture criterion makes the design of fatigue life by experimental method almost impossible. Tearing energy which has its origin in energy release rate is evaluated as fracture criterion of rubber material and the applicability of fatigue life prediction method are considered. The system of measuring tearing energy using the principal of virtual crack extension method and fatigue life prediction by the minimum number of experiments are proposed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.306-310
• /
• 1996

In this paper a series of developing process for an insulator which can be employed in overhead distribution lines, using polymeric composite materials, is introduced. In order to design an insulator for heavily polluted area, weathershed of alternating type was adopted, which could have longer leakage distance. Modified EVA was used as surface material which has good electrical and mechanical characteristics as well as superior chemical stability. FRP core was covered with above surface material through heat shrinking process. By standardization of each process, higher productivity and lower production cost could be ensured. The developed insulator has been put under various tests including long-term field test and artificial aging test and satisfactory results were obtained.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2059-2063
• /
• 2004

Most power plants have operated many independent computerize systems for maintenance. Independence of systems have caused complexity of business process and inconvenience of computer system management. Because the equipment and material master data is not standardize and structurize, it is difficult to manage equipment maintenance history and material delivery. Especially equipment classification criterion is important for standardization of every maintenance information. It is necessary to integrate function of independent systems for business process simplification and rapid work flow. this paper provides equipment classification criterion design and system integration method with the case of live system development.