• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.331-338
• /
• 2013

For this research, 27 out of 52 patients with chronic low back pain involving sacroiliac joint pain were classified into the experimental group to conduct pelvic exercise program and traditional physical therapies in parallel, and the remaining 25 ones were classified into the control group to only apply traditional physical therapies for 6 weeks. After that, their clinical samples were randomly extracted. Before the experiment, both of the experimental group and the control group had the Oswestry disability index test to see how big their pain was and their hip joint angles were analyzed during walking. After the post-test, finally, the results of the Oswestry disability index test and hip joint angles while walking before and after the experiment were compared between two groups to know the effect of pelvic stability exercise program. Within-group results and between-group results both displayed significantly reduced low back pain, and when comparing hip joint angles of the experimental group, there were differences between mid stance phase, terminal stance phase, pre swing phase and early swing phase of the right hip joint, and mid stance phase, terminal stance phase, pre swing phase and early swing phase of the left hip joint. In the control group, there were significant differences between mid stance phase, terminal stance phase and early swing phase of the right hip joint, and loading response phase, mid stance phase, terminal stance phase and pre swing phase of the left hip joint. as a result, pelvic stability exercise program is helpful to gait rhythm on stance phase and swing phase although effective to decrease Oswestry disability index including pain.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.213-219
• /
• 2010

The purpose of this study is developing a method to analyze and evaluate a golf swing motion using the ground reaction force (GRF) data. Proper weight shifting is essential for a successful shot in golf swing and this could be evaluated by means of the forces between the feet and ground. GRF during the swing were measured from 15 low-handicapped male golfers including professionals. Four clubs(driver, iron 3, iron 5, and iron 7) were selected to analyze the differences due to different characteristics of club. Swings of each subject were taken using a high speed video camera and GRF data were taken simultaneously by two AMTI force platforms. To simplify the GRF data, forces of the three major component of GRF(vertical, lateral, anterior-posterior force) at 10 predefined temporal events for each trial were selected and the mean of each event were calculated and evaluated. Analyzed vertical GRF (VGRF) data could be divided into two different styles, one-legged and two legged. One-legged style shows good weight transfer to the target leg and most of the previous study shows this style as a typical pattern of good players. Therefore the data from the iron 5 swing obtained from 10 one-legged style golfers are provided as criteria for the evaluation of a swing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.2
• /
• pp.104-109
• /
• 2009

At a lower supply voltage, voltage-mode drivers draw less current than current-mode drivers. In this paper, we newly propose a voltage-mode driver with an additional current path that reduces the output voltage swing without the need for complicated additional circuitry, compared to conventional voltage-mode drivers. The prototype driver is fabriccated in a 0.13-$^{\mu}m$ CMOS technology and used to transmit data streams at the rate of 2.5 Gb/s. Deemphasis is also implemented for the compensation of channel attenuation. With a 1.2-V supply, it dissipates 8.0 mA for a 400-mV output voltage swing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.115-116
• /
• 2023

This study aims to investigate and improve the carbon dioxide sequestration capability and the mechanical properties of non-hydraulic low calcium silicate cement especially designed for CO₂ reaction and ordinary Portland cement subjected to the carbonation curing facilitating pH swing method. Nitric acid (HNO₃) was utilized as an liquid for the mixing of cement paste to enhance the initial dissolution of Ca ions from the cements by promoting low pH environment and prevent the direct precipitation of Ca with the anion, owing to the high solubility of Ca(NO₃)₂ in water. The results presented that the higher the concentration of HNO₃, the higher the compressive strength and CO₂ sequestration (until 0.1 M). Ca dissolution caused by the harsh acid attack onto the anhydrous cement particle lead to the higher carbonation reaction degree, forming abundant CaCO₃ crystals after the reaction. However, cement paste mixed with excessively high concentration of HNO₃ presented deterioration due to the too harsh pH environment and abundant NO₃- ions which are known to retard the reaction of cement.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.49-58
• /
• 2014

A low-swing differential near-ground signaling (NGS) transceiver for low-power high-speed mobile I/O interface is presented. The proposed transmitter adopts an on-chip regulated programmable-swing voltage-mode driver and a pre-driver with asymmetric rising/falling time. The proposed receiver utilizes a new multiple gain-path differential amplifier with feed-forward capacitors that boost high-frequency gain. Also, the receiver incorporates a new adaptive bias generator to compensate the input common-mode variation due to the variable output swing of the transmitter and to minimize the current mismatch of the receiver's input stage amplifier. The use of the new simple and effective impedance matching techniques applied in the transmitter and receiver results in good signal integrity and high power efficiency. The proposed transceiver designed in a 65-nm CMOS technology achieves a data rate of 13 Gbps/channel and 0.3 pJ/bit (= 0.3 mW/Gbps) high power efficiency over a 10 cm FR4 printed circuit board.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.332-338
• /
• 2017

The objective of this work was to study the low temperature vacuum adsorption technology applicable to small and medium scale painting plants, which is the main emission source of volatile organic compounds. The low-temperature vacuum swing adsorption (VSA) technology is the way that the adsorbates are removed by reducing pressure at low temperature ($60{\sim}90^{\circ}C$) to compensate disadvantages of the existing thermal swing adsorption (TSA) technology. Commercial activated carbon was used and the absorption and desorption characteristics of toluene, a representative VOCs, were tested on a lab scale. Also based on the lab scale experimental results, a $30m^3min^{-1}$ VSA system was designed and applied to the actual painting factory to assess the applicability of the VSA system in the field. As a result of lab scale experiments, a 2 mm pellet type activated carbon showed higher toluene adsorption capacity than that of using 4 mm pellet type, and was used in a practical scale VSA system. Optimum conditions for desorption experiments were $80{\sim}90^{\circ}C$ and 100 torr. In the practical scale system, the adsorption/desorption cycles were repeated 95 times. As a result, VOCs discharged from the painting factory can be effectively removed upto 98% or more even after repeated adsorption/desorption cycles when using VSA technology indicating potential field applicabilities.

• Journal of the Korean Vacuum Society
• /
• v.14 no.1
• /
• pp.7-16
• /
• 2005

Oil-Hydraulic pump consisting of swing twin-cylinder becomes to be used as a next generation of low vacuum pump. However, there is no enough flow-analysis for design improvement. It is essential to develope a numerical method for flow-analysis before manufacturing, in economic sense. Using a commercial code (Fluent), developed for flow-analysis, useful informations for design of pump were provided. Two-dimensional analysis has been performed to investigate the flow parameters such as pressure and velocity distributions between the swing twin-cylinder and the fixed cylinder. This numerical method will be used to design a better performance of pump consisting of swing twin-cylinder.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.42-48
• /
• 2014

In this paper, we propose a new small swing domino logic that reduces the swing amplitude by using twist-connected PMOS and NMOS transistors. The output swing range of the proposed circuit is adjusted by the size of the twist-connected transistors and the load capacitance. The designed RCA with the proposed circuit technique shows reduction of the power consumption by 37% and PDP performance by 43% compared with the domino CMOS logic.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.714-723
• /
• 2003

An effective technique to increase the signal swing and reduce noise is to use fully-differential -circuits. However, design of a common-mode feedback (CMFB) circuit that stabilizes the common-mode output level is essential. In this paper, a general description is given to fully-differential amplifiers with their CMFB loops, then a new error amplifier that is just composed of transistors and stabilizes the DC output level is proposed. We designed a simple and efficient bias circuit that allows the stability and maximum input swing. Simulation result shows the enhanced phase margin and increased differential-mode input swing with a proposed error amplifier.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3764-3773
• /
• 2012

In this study, modeling and optimization works were completed for the separation of 99.9 mol% of methyl ethyl ketone from water through a pressure-swing distillation process since the azeotropic composition varies very sensitively with the change of system pressure. PRO/II with PROVISION release 9.1 was used for the computer simulation and Wilson activity coefficient model was chosen as a modeling equation. A pressure-swing distillation process can be classified into a low-high pressure columns configuration and a high-low pressure columns configuration. In this work, each configurations were optimized for the minimization of steam consumptions, respectively and were compared.