• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.325-333
• /
• 2007

An OS requires the device driver to control hardware IPs at application level. Development of a device driver requires specific acknowledge for target hardware and OS. In this paper, we present a system which generates a device driver together with an interface circuit. In the proposed system, an efficient device driver is generated by selecting a basic device driver skeleton, a function module code, and a header file table from the pre-constructed library and an interface circuit is constructed such that the generated device driver operates correctly. The proposed system is evaluated by generating a TFT-LCD device driver on the ARM922T core with 3.5 inch Samsung TFT-LCD in ARM-Linux environment. Experiment result shows that the writing time on the LCD is decreased by 1.12% and the compiled code size is increased by 0.17% compared to the manually generated one. The automatically generated device driver has no performance degradation in the latency of hardware control at the application program level. The system development time can be reduced using the proposed device driver generation system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.715-722
• /
• 2010

This paper describes a hardware design of hash function processor which implements Korean Hash Algorithm Standard HAS-160. The HAS-160 processor compresses a message with arbitrary lengths into a hash code with a fixed length of 160-bit. To achieve high-speed operation with small-area, arithmetic operation for step-operation is implemented by using a hybrid structure of 5:3 and 3:2 carry-save adders and carry-select adder. It computes a 160-bit hash code from a message block of 512 bits in 82 clock cycles, and has 312 Mbps throughput at 50 MHz@3.3-V clock frequency. The designed HAS-160 processor is verified by FPGA implementation, and it has 17,600 gates on a layout area of about $1\;mm^2$ using a 0.35-${\mu}m$ CMOS cell library.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.63-72
• /
• 2012

In this paper, we proposed a parallel architecture of line & block edge filter for high-performance H.264/AVC deblocking filter for Quad Full High Definition(Quad FHD) video real time processing. To improve throughput, we designed 4-parallel block edge filter with 16 line edge filter. To reduce internal buffer size and processing cycle, we scheduled 4-parallel zig-zag scan order as deblocking filtering order. To avoid data conflicts we placed 1 delay cycle between block edge filtering. We implemented interleaving buffer, as internal buffer of block edge filter, to sharing buffer for reducing buffer size. The proposed architecture was simulated in 0.18um standard cell library. The maximum operation frequency is 108MHz. The gate count is 140.16Kgates. The proposed H.264/AVC deblocking filter can support Quad FHD at 113.17 frames per second by running at 90MHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.11-16
• /
• 2005

This paper proposes a bit manipulation accelerator (BMA) having application specific instructions, which efficiently supports scrambling, convolutional encoding, puncturing, and interleaving. Conventional DSPs cannot effectively perform bit manipulation functions since かey have multiply accumulate (MAC) oriented data paths and word-based functions. However, the proposed accelerator can efficiently process bit manipulation functions using parallel shift and Exclusive-OR (XOR) operations and bit jnsertion/extraction operations on multiple data. The proposed BMA has been modeled by VHDL and synthesized using the SEC $0.18\mu m$ standard cell library and the gate count of the BMA is only about 1,700 gates. Performance comparisons show that the number of clock cycles can be reduced about $40\%\sim80\%$ for scrambling, convolutional encoding and interleaving compared with existing DSPs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.76-84
• /
• 2009

This paper proposes a SOC platform which is eligible for education and application SOC design. The platform, fully synthesizable and reconfigurable, includes the OpenRISC embedded processor, some basic peripherals such as GPIO, UART, debug interlace, VGA controller and WISHBONE interconnect. The platform uses a set of development environment such as compiler, assembler, debugger and RTOS that is built for HW/SW system debugging and software development. Designed SOC, IPs and Testbenches are described in the Verilog HDL and verified using commercial logic simulator, GNU SW development tool kits and the FPGA. Finally, a multimedia SOC derived from the SOC platform is implemented to ASIC using the Magnachip cell library based on 0.18um 1-poly 6-metal technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.18-26
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n wireless LAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A novel memory reduction technique devised using the min-sum decoding algorithm reduces the size of check-node memory by 47% as compared to conventional method. From fixed-point modeling and Matlab simulations for various bit-widths, decoding performance and optimal hardware parameters such as fixed-point bit-width are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.18-${\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.38-45
• /
• 2018

An integrated cryptographic processor that efficiently integrates ARIA, AES block ciphers and Whirlpool hash function into a single hardware architecture is described. Based on the algorithm characteristics of ARIA, AES, and Whirlpool, we optimized the design so that the hardware resources of the substitution layer and the diffusion layer were shared. The round block was designed to operate in a time-division manner for the round transformation and the round key expansion of the Whirlpool hash, resulting in a lightweight hardware implementation. The hardware operation of the integrated ARIA-AES-Whirlpool crypto-processor was verified by Virtex5 FPGA implementation, and it occupied 68,531 gate equivalents (GEs) with a 0.18um CMOS cell library. When operating at 80 MHz clock frequency, it was estimated that the throughputs of ARIA, AES block ciphers, and Whirlpool hash were 602~787 Mbps, 682~930 Mbps, and 512 Mbps, respectively.

• Bioinformatics and Biosystems
• /
• v.1 no.1
• /
• pp.82-87
• /
• 2006

The most popular protein structure prediction method is comparative modeling. To guarantee accurate comparative modeling, the sequence alignment between a query protein and a template should be accurate. Although choosing the best template based on the protein sequence alignments is most critical to perform more accurate fold-recognition in comparative modeling, even more critical is the sequence alignment quality. Contrast to a lot of attention to developing a method for choosing the best template, prediction of alignment accuracy has not gained much interest. Here, we develop a method for prediction of the shift score, a recently proposed measure for alignment quality. We apply support vector regression (SVR) to predict shift score. The alignment between a query protein and a template protein of length n in our own library is transformed into an input vector of length n +2. Structural alignments are assumed to be the best alignment, and SVR is trained to predict the shift score between structural alignment and profile-profile alignment of a query protein to a template protein. The performance is assessed by Pearson correlation coefficient. The trained SVR predicts shift score with the correlation between observed and predicted shift score of 0.80.

• Parasites, Hosts and Diseases
• /
• v.31 no.3
• /
• pp.285-292
• /
• 1993

C. sinensis total RMh was containing large amount of 185 rRNA but little 285 rRNA. The size of the double-stranded cDNA synthesized from poly $(A)^{+}$ mRNA was 0.4-4.2 kb long with tapering unto 9.5 kb. Degenerated oligonucleotides (as 2 sense and 3 antisense Primers) were designed on the conserved regions of the known tropomyosin amino acid sequences. From one out of the PCR amplifications using total CDNA and matrix of primers, a specific gene product, 580 bp in size, was produced. Upon Southern hybridization of the PCR products with Schistosomn mnnsoni tropomyosin (SMTM) CDNA, only one signal appeared at the band of 580 bp product. This 580 bp product was considered to encode C. sinensis tropomyosin (CSTM) and cloned in pGEM-3Zf(-) for DNA sequencing. CSTM cDNA was 575 bp containing one open reading frame of 191 predicted amino acids, which revealed 86.3% homology with SMTM and 51.1% with rrichostronsylur coeubnlormis tropomyosin. CSTM cDNA obtained will serve as a probe in the studies of molecular cloning of CSTM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1355-1362
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. Our LDPC decoder adopts a block-serial architecture based on min-sum algorithm and layered decoding scheme. A novel way to store check-node values and parity check matrix reduces the sizes of check-node memory and H-ROM. An efficient scheme for check-node memory addressing is used to achieve stall-free read/write operations. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a $0.18-{\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.