• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.7
• /
• pp.604-611
• /
• 2004

It is well known that wall impedance essentially determines how sound wave transmits from one place to another. The wall impedance is related with its dynamic properties : for example, the mass, stiffness, and damping characteristics. It is noteworthy, however, that the wall impedance is also function of spatial characteristics of two spaces that is separated by the wall. This is often referred that the wall is not locally reacting. In this paper, we have attempted to see how the acoustic characteristics of the two spaces is affected by various structure parameters such as density, applied tension, and a normalized length of the wall. Calculations are conducted for two different modally reacting boundary conditions by modal expansion method. The variation of the Helmholtz mode and the structural-dominated mode are analyzed as the structure parameters vary. The displacement distribution of the structure, pressure and active intensity of the inside and outside cavity are presented at the Helmholtz mode and the structure-dominated mode. It is shown that the frequency characteristics are governed by both structure-and fluid-dominated mode. The results exhibit that the density of the structure is the most sensitive design parameter on the frequency characteristics for the coupling system as we could imagine in the beginning. The Helmholtz mode frequency decrease as density increases. However. it increases as applied tension and an opening size increase. The bandwidth of the Helmholtz mode is mainly affected by density of the structure and its opening size.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.92-100
• /
• 2009

In this paper, we analyze the hardware architecture of Low Density Parity Check (LDPC) decoder using Log Likelihood Ration-Belief Propagation (LLR-BP) decoding algorithm. Various design issues that affect the decoding performance and the hardware complexity are discussed and the tradeoffs between the hardware complexity and the performance are analyzed. The message data for passing error probability is quantized to 7 bits and among them the fractional part is 4 bits. To maintain the decoding performance, the integer and fractional parts for the intrinsic information is 2 bits and 4 bits respectively. We discuss the alternate implementation of $\Psi$(x) function using piecewise linear approximation. Also, we improve the hardware complexity and the decoding time by applying overlapped scheduling.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.47-54
• /
• 1998

Refining is one of the most important processes of fiber treatment that provides optical and physical properties of final paper products. The evaluation method of refining progress is usually freeness (CSF) or wetness (SR) test because of its rapidity and convenience. However, there are some deficiencies in using freeness or wetness test to evaluate pulp fibers accurately because its results are more influenced by fines contents than extent of fibers treatment. The objective of this study is to show the deficiency of wetness in evaluating the refining process. For this, beating is done by varying the beating load. Handsheets are made after beating until 25 and $32^{\circ}C$ SR, and then paper properties are measured. Refined fibers are analyzed by fiber length, fines contents, curl, kink, WRV, and zero-span tensile strength. The results show that longer beating time is required to reach the same wetness at lower beating load. There are differences in the average fiber length, distribution curve of fiber length, fines contents, curl, kink, WRV of long fiber fraction, drainage time, and zero-span tensile strength of rewetted sample at different beating load. At the low beating load in the same wetness, apparent density, breaking length, burst strength, and tear strength are higher, while opacity and air permeability are lower than those of the high beating load. Using Page s equation, which shows the relationship among tensile strength, intrinsic fiber strength, and interfiber bonding strength, interfiber bonding strength is calculated and analyzed to explain final paper properties. At $25^{\circ}C$ SR, interfiber bonding strength is only slightly higher at 2.5kgf beating load, while the intrinsic fiber strength is substantially higher. At $32^{\circ}C$ SR, intrinsic fiber strength is a little bit higher at 2.5kgf beating load, and interfiber bonding strength is remarkably higher than those of 5.6kgf beating load. These results can be used to explain the different properties of the final paper at selected beating loads.

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.360-371
• /
• 2019

Objective: We sought to determine the predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion (MARPE) in young adults. Methods: The following variables were selected as possible predictors: chronological age, palate length and depth, midpalatal suture maturation (MPSM) stage, midpalatal suture density (MPSD) ratio, the sella-nasion (SN)-mandibular plane (MP) angle as an indicator of the vertical skeletal pattern, and the point A-nasion-point B (ANB) angle for anteroposterior skeletal classification. For 31 patients (mean age, 22.52 years) who underwent MARPE treatment, palate length and depth, MPSM stage and MPSD ratio from the initial cone-beam computed tomography images, and the SN-MP angle and ANB angle from lateral cephalograms were assessed. The midpalatal suture opening ratio was calculated from the midpalatal suture opening width measured in periapical radiographs and the MARPE screw expansion. Statistical analyses of correlations were performed for the entire patient group of 31 subjects and subgroups categorized by sex, vertical skeletal pattern, and anteroposterior skeletal classification. Results: In the entire patient group, the midpalatal suture opening ratio showed statistically significant negative correlations with age, palate length, and MPSM stage (r = -0.506, -0.494, and -0.746, respectively, all p < 0.01). In subgroup analyses, a strong negative correlation was observed with the palate depth in the skeletal Class II subgroup (r = -0.900, p < 0.05). Conclusions: The findings of this study indicated that age, palate length, and MPSM stage can be predictors of midpalatal suture expansion by MARPE in young adults.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.841-849
• /
• 2007

This study evaluated the effect of combined rainfall observation of using rain gauge and rain radar. The effect of combined observations is to be evaluated by considering the decrease of measurement error due to combined use of design orthogonal observation methods. As an example, this study evaluated the rain gauge network of the Keum river basin, and showed how the density of rain gauges could be decreased by combining the radar observation. This study applied the researches on sampling error by North and Nakamoto(1989), Yoo et al. (1996) and Yoo (1997), also the simple NFD model for representing the rainfall field. The model parameters were decided using the rainfall characteristics (correlation time and length) estimated using the data collected in the Keum River Basin by 28 rain gauges and the operation rule of radar was assumed arbitrarily. This study considered the rain gauge density criteria provided by WMO(1994) and the rain gauge density installed in the Keum river basin to decrease the rain gauge density under the condition of introducing the radar.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.116-124
• /
• 2007

An optical method to measure the size and number density of soot aggregates in diesel exhaust has been proposed in this study. Two laser beams in co-axial alignment transmit a soot loaded exhaust gas flow, and the transmittance at each wavelength is detected by a photo diode simultaneously. The volume equivalent diameter and number density of soot aggregates in the optical path can be theoretically given by the transmittance values measured at two wavelengths. A test conducted by a single cylinder, 4 cycle, small and DI diesel engine shows that the temporal variations of the size and number density of soot aggregates in the diesel exhaust can be measured by the proposed method at a transient mode operation. It is found that the volume equivalent diameter varied temporally from 70 to 110 nm during the period that high soot concentration is observed. One can also conclude that the optical length longer than 1 m in the dynamic range regarding this method is preferable for measuring soot concentration at the level of $1\;mg/m^3$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.50-59
• /
• 2014

This experiment was performed in order to study the relationship between physical properties of soil and the growth characteristics of Sedum reflexum. A correlation analysis and multiple regression analysis were performed using SPSS Ver 19.0 for Windows. The multiple regression analysis results of soil physical properties and growth characteristics were as follows. The regression equation: The length=$.993-14.070^*$(soil bulk density)+$.233^*$(solid phase)+$.038^*$(liquid phase)+$.068^*$(permeability). The significance of soil bulk density and solid phase was great. The width=$2.931-33.925^*$(soil bulk density)+$.566^*$(solid phase)+$.206^*$(liquid phase)+$.027^*$(permeability). The significance of soil bulk density and solid phase was great. The wet weight and dry weight of the upper and lower and soil physical properties did not have a direct relationship.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.1-6
• /
• 1984

The present study was made to establish the purification method of mature microsporidian spores by iso-density equilibrium technique using percoll and the serological discrimination by an indirect fluorescent antibody technique. The purification of new microsporidian spores took effect in the three steps purification method(precentrifugation-percoll iso-density equilibrium centrifugation-rising). There were clear differences in the size of spores between the new microsporidia and N. bombycis. The spores of N. bombycis is short elliptical of 2.07 in a ratio of length to width in diameter while that of new microsporidia is characterized with long elliptical shape which shows a ratio of 2.76 in length to width in diameter. The specific antigens of new microsporidia K79 spores was showed in the spores wall by the indirect fluorescent antibody reaction, and it was affected by the antibody against N. bombycis which antiserum was diluted in 1:20. It means that the new microsporidia K79 is serologically not identical to N. bombycis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.128-135
• /
• 2013

This letter presents the MISHFET with si-doped AlGaN/GaN heterostructure for power amplifier. The device grown on 6H-SiC(0001) substrate with a gate length of 180 nm has been fabricated. The fabricated device exhibited maximum drain current density of 837 mA/mm and peak transconductance of 177 mS/mm. A unity current gain cutoff frequency was 45.6 GHz and maximum frequency of oscillation was 46.5 GHz. The reported output power density was 1.54 W/mm and A PAE(Power Added Efficiency) was 40.24 % at 9.3 GHz.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.196-205
• /
• 2020

The purpose of this study was to investigate a method for improving the physical and mechanical properties of laminated board made from oil palm trunk (OPT). The effects of pretreating the lamina with heat-pressure and altering the lamina composition of the laminated board were investigated. The outer third of OPT in cross-section had high-density wood, while the underlying third had low to medium density. The hot press was applied to pretreat the lamina that had low to medium density. The lamina were 1.5 cm in thickness, 5 cm in width, and 65 cm in length. The hot press was applied at 2.94 MPa or 4.41 MPa at 150 ℃ for 60 minutes, and the target thickness of the lamina was 1 cm. The three layers of the laminated board samples were bonded with isocyanate adhesive at a glue spread of 300 g/㎡ and cold pressed at 0.98 MPa for 3 h. The laminated board samples were tested according to Japanese Agricultural Standard (JAS) 234-2003. The results showed that the densification of the inner lamina did not significantly affect the physical-mechanical properties of the laminated board produced. However, the laminated board made with high-density laminas for the outer layers fulfilled the JAS 234-2003 standard for the modulus of elasticity and the modulus of rupture.