• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1064-1066
• /
• 2001

In this paper, the harmonic components generated by those two sources are analyzed separately based on the transfer function and shown as the closed form considering the switching frequency, speed of the control processor, gain of the controller, and the inductor and capacitor value of L-C filter. A design procedure is described with one flow chart and explained step by step.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.287-290
• /
• 1999

This paper describes an optimal design method of VSI output filter for CVCF system. The cost function is used for design, and all parameters are described in p.u(per unit) so that can be adapted to the change of CVCF rating. The capacitor current feedback scheme is proposed to control the damping ratio of the filter plant to meet the system more stable. This means that the LC resonance can be suppressed well in transient condition and can use the same control gains under the change of system capacity. The validity of the proposed method is well verified with the theoretical analysis and simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.506-511
• /
• 1998

This paper gives and analytical expression of the average and rms currents of switching devices in volt-age-fed PWM inverters. It is shown that the device currents are represented by a function of the power factor of the load and the normalized output voltage of the inverter. The validity of the derived formulas is confirmed with simulation and experiment, showing that the modulation method has a minor effect on the characteristics of the device current.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.444-445
• /
• 2010

This paper deals with the development of an IPMSM motor drive for NEVs. The drive system consists of 7kW IPMSM motor, DSP-based controller, and MOSFET-based inverter. The controller provides the same accelerator function as the conventional vehicle for an easy NEV drive.

• 대한전기학회논문지
• /
• 제37권3호
• /
• pp.146-154
• /
• 1988

The computer simulation of speed and phase control system has been carried out in this study. The load of permanent magnet type synchronous motor is not constant in this system. The cost function method has been used in obtaining the optimal gain of PI controller and the rotor position angle of phase controller has been compensated depending on the load and speed variation. This analysis also shows that the current of d-axis component is zero under the variable a load conditions and the torque per unit current can be maximized.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.321-322
• /
• 2012

This paper presents the study of standard family of power inverters, SEMIKUBE. One of key points of SEMIKUBE is that it's a combination of cubes, each of which achieves a given function, as specified. To drive this inverters, SEMIKRON's advanced technologies was applied. We proved the performance by various experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.38-40
• /
• 2019

태양광발전설비 보급확대에 따른 전력계통의 안정도 확보를 위해 태양광인버터 계통안정도 향상을 위한 기능들의 추가가 요구되고 있다. 계통안정도 향상 기능 중 가장 대표적인 것이 LVRT(Low Voltage Ride-Through)이고, 태양광인버터의 계통 연계에서 효과적으로 LVRT 기능을 수행하기 위한 제어기 설계 방법을 제안하고 이를 PSIM 시뮬레이션 및 실험을 통해 검증하였다.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.712-720
• /
• 2015

A model predictive current control (MPCC) method that does not employ a cost function is proposed. The MPCC method can decrease common-mode voltages in loads fed by three-phase voltage-source inverters. Only non-zero-voltage vectors are considered as finite control elements to regulate load currents and decrease common-mode voltages. Furthermore, the three-phase future reference voltage vector is calculated on the basis of an inverse dynamics model, and the location of the one-step future voltage vector is determined at every sampling period. Given this location, a non-zero optimal future voltage vector is directly determined without repeatedly calculating the cost values obtained by each voltage vector through a cost function. Without utilizing the zero-voltage vectors, the proposed MPCC method can restrict the common-mode voltage within ± V_dc/6, whereas the common-mode voltages of the conventional MPCC method vary within ± V_dc/2. The performance of the proposed method with the reduced common-mode voltage and no cost function is evaluated in terms of the total harmonic distortions and current errors of the load currents. Simulation and experimental results are presented to verify the effectiveness of the proposed method operated without a cost function, which can reduce the common-mode voltage.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.195-198
• /
• 2008

최근 태양광 발전시스템 등 낮은 전압을 발생하는 전원소스를 이용하여 높은 승압효과를 얻기 위한 멀티레벨 인버터에 대한 관심이 높아지고 있다. 본 논문은 FPGA 기반 멀티레벨 인버터용 스위칭 함수를 구현하고자 한다. FPGA는 프로그램 가능한 로직 디바이스로써 풀 디지털 스위칭함수를 구현하는 효율적이다. 본 논문에서는 FPGA 기반 스위칭 함수를 구현하기 위해서 마이크로프로세서로부터 출력되는 클럭과 동기신호로 독립적으로 구동이 되도록 하였다.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.294-302
• /
• 2004

본 연구에서는 수직순환식 입체주차설비용 유도전동기를 제어할 수 있는 인버터장치를 개발하였다 차량의 주차 공간인 파렛트를 호출하는 경우 종래 시스템에 있어서의 승강장 정위치 제어 불능 문제와 이동속도가 잔존한 상태에서의 강제 제동에 따른 제동장치계통의 급속한 마모현상을 근본적으로 해결하도록 하였다. 또한 전원회생기능을 구비한 컨버터제어기를 적용함으로써 수전단 전원용량의 축소와 동작빈도수의 증가에 따른 소비전력의 절감 효과를 기하도록 하였다. 본 연구를 통해 수직순환식 기계식 주차설비의 구동제어에 있어서 부하에 따른 위치 및 속도제어를 효과적으로 구현함으로써 정숙한 운전 특성을 확보하였고 역률제어에 따른 에너지 절감 효과를 기하였다. 실험은 55㎾급 유도전동기를 대상으로 하여 그 결과를 확인하였다.