• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.195-197
• /
• 2022

In this paper, we intend to study the fundamental blocking methodology for the use of external commercial mail systems in the corporate internal Internet network, which is a common concern of public and administrative agencies. By checking the limitations of the blacklist-based blocking method used in the past, and by analyzing packet of the mail sending web page, the delimiter used for mail transmission is extracted, and the purpose is to monitor and block the leakage of intenal information of the company using whitelist technology.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.5
• /
• pp.83-91
• /
• 2018

Purpose - The purpose of this study is to explore the introduction and activation of smart training for the effective training of vocational ability development of companies in the 4th industrial revolution era, we analyze the present status of smart training introduction and related difficulties and propose concrete activation plan. Research design, data, and methodology - Through the online survey, we tried to confirm the recognition of corporate about smart training. Questionnaires include what are the benefits, expectations, and difficulties of smart training, etc. The survey was conducted from August 21, 2017 to September 4, 2017. A total of 69 companies participated in the questionnaire. The questionnaire results were analyzed through frequency analysis and contents analysis. Based on the results of the questionnaire, we found out the cause of inhibition of smart training activation and suggested activation strategies. Results - The main reason for the provision of smart training is the expectation of the training performance and the recognition that it is possible to provide training in a flexible manner. The effectiveness of smart training operation was evaluated as a high level of contribution to the development of creative training course and the capacity of training institute. As a result of checking factors that hinders the activation of smart training, the most important reason is that the time and cost burden of the training institutes is excessive. The lack of expertise in the design of smart training courses and the burden of employers and trainees. Conclusions - In order to activate smart training, it is necessary to find solutions to the obstacles at the internal or external level of training institutions. The internal barriers to the training organization are lack of internal competence for preparation and course management. In this regard, we need to consider providing consulting, best practices or guidance in the process of designing and operating smart training. On the other hand, as an external obstacle factor, it is necessary to provide incentives to participate in smart training. In addition, further research is needed on strategies that can lead to participation in smart training from the viewpoint of employers and learners.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.72-81
• /
• 2011

In this paper, we proposed and designed a novel floating point converter which supports single and double precisions of IEEE754 standard. The proposed convertor supports conversions between floating point number single/double precision and signed fixed point number(32bits/64bits) as well as conversions between signed integer(32bits/64bits) and floating point number single/double precision and conversions between floating point number single and double precisions. We defined a new internal format to convert various input types into one type so that overflow checking could be conducted easily according to range of output types. The internal format is similar to the extended format of floating point double precision defined in IEEE754 2008 standard. This standard specifies that minimum exponent bit-width of the extended format of floating point double precision is 15bits, but 11bits are enough to implement the proposed converting unit. Also, we optimized rounding stage of the convertor unit so that we could make it possible to operate rounding and represent correct negative numbers using an incrementer instead an adder. We designed single cycle data path and 5 cycles data path. After describing the HDL model for two data paths of the convertor, we synthesized them with TSMC 180nm technology library using Synopsys design compiler. Cell area of synthesis result occupies 12,886 gates(2 input NAND gate), and maximum operating frequency is 411MHz.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.771-781
• /
• 1994

The heat generation of cement causes the internal temperature rise and volume change at early age, particulary in massive concrete structures. As the results of the temperature rise and restraint conditions, the thermal stress may induce cracks in concrete. Therefore, the prediction of the thermal stress is very important in the design and construction in order to control the cracks developed in mass concrete. In case of young concrete, creep effect by the temperature load is larger than that of old concrete. Thus, the effect of creep must be considered for checking the cracks, serviceability, durability and leakage. This paper is concentrated on the development of a finite element program which is capable of simulating the temperature history and the thermal stress considering creep and the modified elastic modulus due to inner temperature change and maturity. The analytical results in the inner parts highest important to control cracks are in good agreement with experimental data. Therefore this study may provide available method to control the cracks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.663-666
• /
• 2012

Since September 30 2011, depending on Personal Information Protection Act article 29 and Act standard securing personal information safety the fifth clause of article 7, in case personal information manager of public and private enterprise saves unique indentifying information to internal network, the manager can enforce that decide checking of cryptographic application and a range of application following risk analysis criteria result. Until December 31 2012, enterprises complete the application of cryptographic technology or the equivalent. The paper is research and development on supporting tool that suggest risk analysis criteria based on personal information risk analysis criteria that be provided by MOPAS(Ministry Of Public Administration and Security) and KISA(Korea Internet Security Agency) for personal information processing.

• Steel and Composite Structures
• /
• v.19 no.4
• /
• pp.861-876
• /
• 2015

Composite sections design consists on checking that the point defined by axial load and bending moment keeps included within the surface enclosed by the section interaction curve. Eurocode 4 suggests a method for tracing this diagram based on the plastic stress distribution method. However curves obtained according to this criterion overvalue concrete encased sections bearing capacity, especially when axial force comes with high bending moment values, so a correction factor is required. This article proposes a method for tracing this diagram based on the strain compatibility method. When stresses on the section are integrated by considering the Navier hypothesis, the use of the materials nonlinear constitutive equations provides curves much more adjusted to reality. This process requires the use of rather complex software which might reveal as too complex for practitioners. Preserving the same criteria of an elastic-plastic stress distribution, this article presents alternative expressions to obtain the failure internal forces in five significant points of the interaction diagram having considered five different positions of the neutral axis. These expressions are simply enough for their practical application. Concordance of curves traced strictly relying on these five points with those obtained by computer assisted stress integration considering the strain compatibility method and even with Eurocode 4 weighted curves will be presented for three different cross-sections and two different concrete strengths, revealing very good results.

• Journal of architectural history
• /
• v.11 no.3 s.31
• /
• pp.21-34
• /
• 2002

This study is to analyse the transformation process of spatial structure of traditional small city structure in Jeollabuk-Do in the process of modern urbanization between 19th century and the year 2000. The small cities, IM-PI, YONG-AN, YEO-SAN, OK-GOO, GO-SAN, MU-JANG, GUM-MA, GO-BU, which have been local administrative center in CHO-SUN dynasty, have role of local administrative center of subdivision of country-myon, except OK-GOO. The method of this study is to investigate the transformation process of spatial structural elements of with the actual field surveys, the analysis of Gunhyun map made in 1872, land registration maps in 1910s and 2000, and various topological maps. The elements of analysis are the topological site and geographical situation conditions, the urbanized areas, the street systems, the function of streets, the focal points of urban land use, the land use systems, and the location of major facilities such as administration facilities, markets, bus terminals. The analytical point of view and the results are as follows. There is strong relationship between the transformation of internal matrix route system and the growth pattern of urbanized areas, Especially on the contrary to the matrix route with East-West direction which has the role of checking the growth of urbanized area, the South-North direction route acts as the leading line of the growth. The focal points structure of urban land use shows transformation process from the point of central space of administrative district in front of Nae-A, to the access point to administrative district or to the access point to housing and neighborhood commercial area. From the point of functional area structure and major facilities location, line-type commercial area is developed along the line of central axis route and access route to administrative district. Especially direction of the growth of commercial area is strongly connected with the interrelationship between the study area and its neighboring cities. Pattern of commercial district development is varied with the direction of matrix route. That is, commercial district, which shows one side development pattern along the East-West direction route, is developed on both sides of street along the South-North direction route.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.965-968
• /
• 2008

The KS F 2403 method used on domestic sites for checking the compressive strength of a structure, sets the compressive strength of the concrete used in structural specimens as the compressive strength of testing specimens. Under this regulation, the curing method used for testing the specimens must be the standard ponding curing method (20$\pm$2$^{\circ}$C). However, because in-placed concrete is exposed to open air and cured under the seasonal temperature changes, the compressive strength of a real structure is different from the tested compressive strength. (Therefore,) This thesis first identifies the distinct characteristics of the strength development by applying the curing method listed under the KS and used for testing specimens on compressive strength tests; the atmospheric curing method, the sealed curing method, and the structural specimen core strength testing methods used for the in-sites quality checks including reckoning of the compressive strength of the structural specimens and form-demolding period; and the curing method suggested in this research, which sets the internal conditions of the structural specimens as the conditions of the applied curing method. Then, the thesis suggests the specimen curing method that most closely reenacts the compressive strength of the concrete used on the structural specimens

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.235-242
• /
• 2018

The purpose of this study is to provide basic data for human resource management and efficient hospital management of organization by checking the effect of psychological contract of nurses on voice behavior. It is a descriptive research study that survey nurses who consented responded to the research questions. As a result, nurse practitioners showed a low level of perceptions of organizational commitment, psychological contracts, transactional contract and relational contract. There was a positive correlation between transactional contract and constructive voice(p<.05), and there was a negative correlation between relational contract and destructive voice(p<.05). Therefore, it is necessary to establish a system in which internal and external compensation can be made according to changes in roles of nurses in order to carry out new polices and organizational changes. It is also necessary to improve the organizational culture so that nurses can actively participate in policy and organizational change.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.233-239
• /
• 2014

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analyzer in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. The combustion analysis is desperately needed in order to induce a correct judgment on the condition of the engine and suggest the specific ways to improvement as well as the correct engine output. And these tool is advantageous to reduce fuel consumption and maintenance of the engine. In this study, using the developed measuring kit, combustion analysis of marine generator engine which was adapted as test engine was carried out. It was verified that the good operation condition of the engine as well as contributing to fuel savings by checking and readjusting accurately the irregular combustion of the test engine were accomplished. From the results all above, it was recognized that the measuring kit by new method for engine output was developed and verified for its utilities.