• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1575-1579
• /
• 1999

Embedded processors often accommodate two instruction sets, a standard instruction set and a compressed instruction set. With the compressed instruction set, code size can be reduced while instruction count (and consequently execution time) can be increased. To achieve code size reduction without significant increase of execution time, this paper proposes a new compressed instruction set architecture, called TOE (Two Operations Execution). The proposed instruction set format includes the parallel bit that indicates an instruction can be executed simultaneously with the next instruction. To add the parallel bit, TOE instruction format reduces the destination register field. The reduction of the register field limits the number of registers that are accessible by an instruction. To overcome the limited accessibility of registers, TOE adapts non-homogeneous register partition in which registers are divided into multiple subsets, each of which are accessed by different groups of instructions. With non-homogeneous registers, each instruction can access only a limited number of registers, but an entire program can access all available registers. With efficient non-homogeneous register allocator, all registers can be used in a balanced manner. As a result, the increase of code size due to register spills is negligible. Experimental results show that more than 30% of TOE instructions can be executed in parallel without significant increase of code size when compared to existing Thumb instruction set.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.643-646
• /
• 2005

This paper presents CARMA (Cycle-Accurate Retargetable Micro-Architecture) as efficient framework for SoC-centric pipelined instruction-set architectures. It is based on ADL (Architecture Description Language) and provides more concise and manifest semantics to describe behavior of instruction set by mixing efficiency of instruction-set simulators and flexibility of RTL simulators. It exploits new timing model method based on process scheduling so it can support general timing model with cycle accuracy for large-scaled architectures usually used in SoC multimedia chip-set. According to experiments, the proposed framework was shown to be 5.5 times faster than HDL and 2.5 times faster than System-C in simulation speed so it is applicable for complex instruction-set pipelined architectures.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.161-164
• /
• 2000

The architecture of microprocessor for a embedded system should be one that can perform more tasks with fewer instruction codes. The machine codes that high-level language compiler produces are mainly composed of specific ones, and codes that have small size are more frequently used. Extended Instruction Set Architecture (EISC) was proposed for that reason. We have designed pipe-line system for 64 bit EISC microprocessor. function level simulator was made for verification of design and instruction set architecture was also verified by that simulator. The behavioral function of synthesized logic was verified by comparison with the results of cycle-based simulator.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.4
• /
• pp.229-234
• /
• 2007

In this paper, we present an efficient instruction set architecture using vector register file hardware to accelerate operation of general matrix-vector operations in DSP microprocessor. The technique enables in-situ row-access as well as column access to the register files. It can reduce the number of memory access significantly. The technique is especially useful for block-based video signal processing kernels such as FFT/IFFT, DCT/IDCT, and two-dimensional filtering. We have applied the new instruction set architecture to in-loop deblocking filter processing in H.264 decoder. Performance comparisons show that the required load/store operations for the in-loop deblocking filter can be reduced about 42%. The architecture would improve the processing speed, and code density in DSP microprocessor especially for video signal processing substantially.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.939-946
• /
• 2009

In this paper, we propose a new network ASIP(Application Specific Instruction-set Processor) which was designed for simulation models by a machine descriptions language LISA(Language for Instruction Set Architecture). This network ASIP is aimed for an exclusive engine undertaking packet processing in a router. To achieve the purpose, we added a new necessary instruction set for processing a general ASIP based on MIPS(Microprocessor without Interlock Pipeline Stages) architecture in high speed. The new instructions can be divided into two groups: a classification instruction group and a modification instruction group, and each group is to be processed by its own functional unit in an execution stage. The functional unit was optimized for area and speed through Verilog HDL, and the result after synthesis was compared with the area and operation delay time. Moreownr, it was allocated to the Macro function ana low-level standardized programming language C using CKF(Compiler Known Function). Consequently, we verified performance improvement achieved by analysis and comparison of execution cycles of application programs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1012-1017
• /
• 1993

In this paper, the instruction set and the architecture of a RISC processor for programmable logic controller is suggested. From the measurement of existing programs, the characteristics of ladder instructions are analyzed. The instruction set is defined so that the existing ladder program can be reused with simple translation. Because bit instructions controls the behavior of word instructions, the processor suits for high level language like SFC. Simulations show that the PLC with the suggested processor is twenty times faster than the PLC with the multi-purpose microprocessor.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.1-10
• /
• 2013

In this paper, the parallel branch instruction is proposed which executes a branch instruction and the frequently used instruction simultaneously to improve the performance of Thumb-2 instruction set architecture. In the proposed approach, new 32-bit parallel branch instructions are introduced which combine 16-bit branch instruction with each of the frequently used 16-bit LOAD, ADD, MOV, STORE, and SUB instructions, respectively. To provide the encoding space of the new instructions, the register field in less frequently executed instructions is reduced, and the new instructions are encoded by using the saved bits. Experiments show that the proposed approach improves performance by an average of 8.0% when compared to the conventional approach.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.11-23
• /
• 2012

To achieve efficient code size reduction, this paper proposes a new compressed instruction set architecture for the OpenRISC architecture. The new instructions and their corresponding formats are designed by the profiling information of the existing instruction usage. New 16-bit instructions and 32-bit instructions are proposed to compressed the existing 32-bit instructions and instruction sequences, respectively. The proposed instructions can be classified into three types. The first is the new 16-bit instructions for the frequent normal 32-bit instructions such as add, load, store, branch, and jump instructions. The second type is the new 32-bit instructions for the consecutive two load instructions, two store instructions, and 32-bit data mov instructions. Finally, two new 32-bit instructions are proposed to compress function prolog and epilog code, respectively. OpenRISC hardware decoder is extended to support the new instructions. Experiments show that the efficiency of code size reduction improves by an average of 30.4% when compared to the OR1200 instruction set architecture without loss of execution performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.331-340
• /
• 2021

As the communication industry develops, the development of SoC (System on Chip) is increasing. Accordingly, the paradigm of technology design of industries and companies is changing. In the existing process, companies purchased micro-architecture, but now they purchase ISA (Instruction Set Architecture), and companies design the architecture themselves. RISC-V is an open instruction set based on a reduced instruction set computer. RISC-V is equipped with ISA, which can be expanded through modularization, and an expanded version of ISA is currently being developed through the support of global companies. In this paper, we present benchmarking frameworks ARIA, LEA, and PIPO of Korean block ciphers in RISC-V. We propose implementation methods and discuss performance by utilizing the basic instruction set and features of RISC-V.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.3
• /
• pp.31-37
• /
• 1995

In this paper, we propose a programmable 16 bit DSP architecture using FIFO instruction memory. With this DSP architecture, System structure, BUS structure, instruction set ant and an assembler for system test are developed. The characteristic of this structure is that it simply fetches instructions not from RAM but from FIFO using shift operations. Accordingly, System can be designed regardless of RAM access time. One cycle is enough to execute an instruction, if instruction pipeline is operated. Another merit of this structure is that we can obtain the same effect as instruction pipelining without constructing a complex pipelined controller by decreasing the pipeline number.