• 한국대기환경학회지
• /
• 제31권4호
• /
• pp.368-377
• /
• 2015

Bunker C fuel oil is a high-viscosity oil obtained from petroleum distillation as a residue. The sulfur content of bunker C fuel oil is limited to 4.0% or even lower to protect the environment. Because bunker C fuel oil is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, carbon dioxide is emitted as a result of combustion. The objective of this study is to investigate $CO_2$ emission characteristics of bunker C fuel oil by sulfur contents. Calorific values and carbon contents of the fuels were measured using the oxygen bomb calorimeter method and the CHN elemental analysis method, respectively. Sulfur and hydrogen contents, which were used to calculate the net calorific value, were also measured and then net calorific values and $CO_2$ emission factors were determined. The results showed that hydrogen content increases and carbon content decreases by reducing sulfur contents for bunker C fuel oil with sulfur contents less than 1.0%. For sulfur contents between 1.0% and 4.0%, carbon content increases as sulfur content decreases but there is no evident variation in hydrogen content. Net calorific value increases by reducing sulfur contents. $CO_2$ emission factor, which is calculated by dividing carbon content by net calorific value, decreases as sulfur content decreases for bunker C fuel oil with sulfur contents less than 1.0% but it showed relatively constant values for sulfur contents between 1.0% and 4.0%.

• 한국약용작물학회지
• /
• 제15권2호
• /
• pp.105-111
• /
• 2007

The protective effect of ethanol extract of Korean mistletoe (KM; Viscum album coloratum) on hydrogen peroxide $(H_{2}O_{2})-induced$ neurotoxicity was examined in primary cultured rat cortical neurons. $H_{2}O_{2}$ reduced viability of cortical neurons in a concentration-dependent manner. The addition of KM, over a concentration range of 10 to 100 ${\mu}g/ml$, concentration-dependently prevented the $H_{2}O_{2}(100\;{\mu}M)-induced$ neuronal cell death, as assessed by a 3-[4,5-dimethylthiazol-2-yl]-2,5-di-phenyl-tetrazolium bromide (MTT) assay and Hoechst 33342 staining. KM significantly inhibited $H_{2}O_{2}-induced$ elevation of the cytosolic $Ca^{2+}$ concentration $([Ca^{2+}]_{c})$, which was measured by a fluorescent dye, fluo-4 AM. KM inhibited glutamate release into medium and generation of reactive oxygen species (ROS) induced by $H_{2}O_{2}$. These results suggest that KM may mitigate the $H_{2}O_{2}-induced$ neurotoxiciy by interfering with the increase of $[Ca^{2+}]_{c}$, and inhibiting glutamate release and generation of ROS in cultured neurons.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.633-638
• /
• 2008

열화학적 물분해에 의한 수소 생산 공정 중의 하나인 IS(Iodine-sulfur) 사이클에서 요오드와 이산화황, 그리고 물을 반응물로 하여 요오드화수소와 황산을 제조하는 분젠 반응에 대한 연구를 수행하였다. 요오드의 투입 몰수에 관계없이 황산의 생성량은 일정하였으나 요오드화수소의 생성량은 요오드의 투입 몰수가 증가함에 따라 감소하는 경향을 나타내었다. 이는 생성된 요오드화수소와 미 반응된 요오드가 $HI_3$ $HI_5$ or $HI_7$와 같은 착화합물인 polyiodide를 형성하기 때문인 것으로 생각된다. 이들 착화합물의 형성은 생성물의 2액상 분리 특성의 향상을 가져온다. 또한 요오드 투입 몰수의 증가함에 따라 반응 속도는 향상되었다. 반응물인 요오드의 투입 몰수 및 반응 온도가 증가함에 따라 생성 용액의 2액상 분리 특성이 향상되었으며 모든 실험의 조건 하에서 부반응은 발생 되지 않는 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.405-410
• /
• 2020

In this literature, we are introduce a basic design of multi energy hub based on natural gas governor station. Multi energy hub consists of turbo expender generator, phosphoric acid fuel cell, pressure swing adsorption, H₂ charging station, utilities and etc. We design a hybrid energy hub system that provides energy using these complex energies, and calculates the amount of electricity that can be produced and the amount of hydrogen charged through the process analysis. TEG and phosphoric acid fuel cell produce 2,290 to 2,380 kW and can supply electricity to 500 houses. In addition, By-product H₂ gas is refined to H₂ vehicle fuel. This will help maximize the balance of energy demand and supply and improve national energy efficiency by integrating unused decompression energy power generation technology and various power generation/heat source technologies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.602-608
• /
• 2014

저탄소 친환경 대체 에너지의 한 분야인 수소에너지는 화석연료의 개질 및 물의 전기분해 등 다양한 방법을 통해 얻어진다. 수소를 연료로 사용하는 연료전지인 PEMFC용 1kW급 평판형 수소생산시스템을 자체 개발하였다. FEMFC는 CO에 의한 오염에 민감하므로 공급되는 개질가스 중에 CO 농도는 10ppm 이하로 제거되어야 한다. 본 연구에서는 다양한 실험조건에서 $H_2$ 및 CO의 농도를 측정하여 최적의 운전조건을 확립하였다. 결과적으로 A/F ratio ${\alpha}=1.3$, STR temperature 1023K, S/C ratio 3, and $PrOx1{\cdot}2$ 30cc/min에서 최적임을 확인하였다. 또한 PrOx 2단이 CO 농도를 줄이는데 더욱 효과적임을 알 수 있었다.

• 동의생리병리학회지
• /
• 제19권6호
• /
• pp.1594-1598
• /
• 2005

Scopoletin (6-methoxy-7-hydrorycournarin) is a phenolic coumarin and a member of the phytoalexins. In this study we investigated whether scopoletin causes apoptosis in human hepatoma HepG2 cells and, if so, by what mechanisms. We report that scopoletin induced apoptosis as confirmed by a chromatin condensation. The signal cascade acivated by scopoletin included the activation of caspase-3 as evidenced by increased pretense activity. Activation of caspase-3 resulted in the cleavage of 116 kDa poly(ADP-ribose) polymerase (PARP) to 85 kDa cleavage product in a dose-dependent fashion. Also, scopoletin-induced apoptotic mechanism of HepG2 cells involved the generation of hydrogen peroxide. Taken together, these results suggest that scopgletin induces hydrogen peroxide generation, which, in turn, causes activation of caspase-3, degradation of PARP, and eventually leads to apoptotic cell death in HepG2 cells.

• 한국약용작물학회지
• /
• 제17권1호
• /
• pp.68-74
• /
• 2009

Vitis amurensis (VA; Vitaceae) has long been used in oriental herbal medicine. It has been reported that roots and seeds of VA have anti-inflammatory and antioxidant effects. In the present study, the protective effect of ethanol extract from stems and leaves of VA on hydrogen peroxide (${H_2}{O_2}$) (100 ${\mu}M$)-induced neuronal cell damage was examined in primary cultured rat cortical neurons. VA (10-100 ${\mu}g$/ml) concentration-dependently inhibited ${H_2}{O_2}$-induced apoptotic neuronal cell death measured by 3-[4,5-Dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT) assay and Hoechst 33342 staining. VA inhibited ${H_2}{O_2}$-induced elevation of intracellular $Ca^{2+}$ concentration (${[Ca^{2+}]}_i$) and generation of reactive oxygen species (ROS), which were measured by fluorescent dyes. Pretreatment of VA also prevented glutamate release into medium induced by 100 ${\mu}M$ ${H_2}{O_2}$, which was measured by HPLC. These results suggest that VA showed a neuroprotective effect on ${H_2}{O_2}$-induced neuronal cell death by interfering with ${H_2}{O_2}$-induced elevation of ${[Ca^{2+}]}_i$, glutamate release, and ROS generation. This has a significant meaning of finding a new pharmacological activity of stems and leaves of VA in the CNS.

• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.170-179
• /
• 2017

본 논문은 소듐냉각고속로 원형로 소듐-물 반응 압력완화계통의 급수배출부와 수소방출부의 설계요건 도출을 목적으로 한다. 증기발생기 전열관 누설에 의한 소듐-물 반응 발생 시, 증기발생기 내의 급수 증기를 신속하게 배출하는 조건을 도출하기 위해 급수덤프탱크 가스방출배관의 단면적과 증기발생기 급수배출배관의 수직길이를 변화시켜 연구를 수행하였다. 정상운전과 재장전운전에 대해 각각 계산을 수행하여 급수덤프탱크 가스방출배관의 단면적과 증기발생기 급수배출배관의 수직길이를 결정하였다. 정상운전 조건에서 소듐-물 반응 발생 시, 생성물인 수소에 의해 형성되는 과압이 소듐덤프탱크의 설계압력을 만족시킬 수 있도록 하는 가스방출배관의 직경을 도출하였고, 이 때 대기로 방출되는 수소의 유량과 농도를 계산하였다. 본 논문의 계산결과는 향후 소듐냉각고속로 원형로의 소듐-물 반응 압력완화계통의 설계요건으로 활용될 예정이다.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.1-8
• /
• 2004

두께가 3nm인 게이트 산화막을 사용한 n-MOSFET에 정전압 스트레스를 가하였을 때 관찰되는 SILC 및 soft breakdown 열화 및 이러한 열화가 소자 특성에 미치는 영향에 대해 실험하였다. 열화 현상은 인가되는 게이트 전압의 극성에 따라 그 특성이 다르게 나타났다. 게이트 전압이 (-)일 때 열화는 계면 및 산화막내 전하 결함에 의해 발생되었지만, 게이트 전압이 (＋)일 때는 열화는 주로 계면 결함에 의해 발생되었다. 또한 이러한 결함의 생성은 Si-H 결합의 파괴에 의해 발생할 수 있다는 것을 중수소 열처리 및 추가 수소 열처리 실험으로부터 발견하였다. OFF 전류 및 여러 가지 MOSFET의 전기적 특성의 변화는 관찰된 결함 전하(charge-trapping)의 생성과 직접적인 관련이 있다. 그러므로 실험 결과들로부터 게이트 산화막으로 터널링되는 전자나 정공에 의한 Si 및 O의 결합 파괴가 게이트 산화막 열화의 원인이 된다고 판단된다. 이러한 물리적 해석은 기존의 Anode-Hole Injection 모델과 Hydrogen-Released 모델의 내용을 모두 포함하게 된다.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.16-25
• /
• 2016

In severe loss of coolant accidents (LOCA), similar to those experienced at Fukushima Daiichi and Three Mile Island Unit 1, the zirconiumalloy fuel claddingmaterials are rapidlyheateddue to nuclear decay heating and rapid exothermic oxidation of zirconium with steam. This heating causes the cladding to rapidly react with steam, lose strength, burst or collapse, and generate large quantities of hydrogen gas. Although maintaining core cooling remains the highest priority in accident management, an accident tolerant fuel (ATF) design may extend coping and recovery time for operators to restore emergency power, and cooling, and achieve safe shutdown. An ATF is required to possess high resistance to steam oxidation to reduce hydrogen generation and sufficient mechanical strength to maintain fuel rod integrity and core coolability. The initiative undertaken by Electric Power Research Institute (EPRI) is to demonstrate the feasibility of developing an ATF cladding with capability to maintain its integrity in $1,200-1,500^{\circ}C$ steam for at least 24 hours. This ATF cladding utilizes thin-walled Mo-alloys coated with oxidation-resistant surface layers. The basic design consists of a thin-walled Mo alloy structural tube with a metallurgically bonded, oxidation-resistant outer layer. Two options are being investigated: a commercially available iron, chromium, and aluminum alloy with excellent high temperature oxidation resistance, and a Zr alloy with demonstratedcorrosionresistance.Asthese composite claddings will incorporate either no Zr, or thin Zr outer layers, hydrogen generation under severe LOCA conditions will be greatly reduced. Key technical challenges and uncertainties specific to Moalloy fuel cladding include: economic core design, industrial scale fabricability, radiation embrittlement, and corrosion and oxidation resistance during normal operation, transients, and severe accidents. Progress in each aspect has been made and key results are discussed in this document. In addition to assisting plants in meeting Light Water Reactor (LWR) challenges, accident-tolerant Mo-based cladding technologies are expected to be applicable for use in high-temperature helium and molten salt reactor designs, as well as nonnuclear high temperature applications.