Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Improving Accident Tolerance of Nuclear Fuel with Coated Mo-alloy Cladding

  • Received : 2015.12.18
  • Accepted : 2015.12.19
  • Published : 2016.02.25
Download PDF
⟨ Previous Next ⟩

Abstract

In severe loss of coolant accidents (LOCA), similar to those experienced at Fukushima Daiichi and Three Mile Island Unit 1, the zirconiumalloy fuel claddingmaterials are rapidlyheateddue to nuclear decay heating and rapid exothermic oxidation of zirconium with steam. This heating causes the cladding to rapidly react with steam, lose strength, burst or collapse, and generate large quantities of hydrogen gas. Although maintaining core cooling remains the highest priority in accident management, an accident tolerant fuel (ATF) design may extend coping and recovery time for operators to restore emergency power, and cooling, and achieve safe shutdown. An ATF is required to possess high resistance to steam oxidation to reduce hydrogen generation and sufficient mechanical strength to maintain fuel rod integrity and core coolability. The initiative undertaken by Electric Power Research Institute (EPRI) is to demonstrate the feasibility of developing an ATF cladding with capability to maintain its integrity in $1,200-1,500^{\circ}C$ steam for at least 24 hours. This ATF cladding utilizes thin-walled Mo-alloys coated with oxidation-resistant surface layers. The basic design consists of a thin-walled Mo alloy structural tube with a metallurgically bonded, oxidation-resistant outer layer. Two options are being investigated: a commercially available iron, chromium, and aluminum alloy with excellent high temperature oxidation resistance, and a Zr alloy with demonstratedcorrosionresistance.Asthese composite claddings will incorporate either no Zr, or thin Zr outer layers, hydrogen generation under severe LOCA conditions will be greatly reduced. Key technical challenges and uncertainties specific to Moalloy fuel cladding include: economic core design, industrial scale fabricability, radiation embrittlement, and corrosion and oxidation resistance during normal operation, transients, and severe accidents. Progress in each aspect has been made and key results are discussed in this document. In addition to assisting plants in meeting Light Water Reactor (LWR) challenges, accident-tolerant Mo-based cladding technologies are expected to be applicable for use in high-temperature helium and molten salt reactor designs, as well as nonnuclear high temperature applications.

Keywords

References

  1. B. Cheng, Fuel behavior in severe accidents and Mo-alloy based cladding to improve accident tolerance, Paper #A0034, TopFuel, Birmingham, UK, 2012.
  2. S. Bragg Sitten, Application of MELCOR to ATF Concepts for Severe Accident Analysis, Presented at EPRI/INL/DOEWorkshop on Accident Tolerant Fuel, San Antonio, February 27, 2014.
  3. B. Cheng, P. Chou, Y. J. Kim, Feasibility evaluations of Mo-alloy cladding to enhance accident tolerance, Paper #0204, TopFuel, Zurich (Switzerland), September 14, 2015.
  4. IAEA Symposium on Accident Tolerant Fuel Concepts for Light Water Reactors, Oak Ridge National Laboratory, Tennessee, USA, Oct. 13-16, 2014 (Proceedings to be published by IAEA).
  5. B.V. Cockeram, R.W. Smith, K.J. Leonard, T.S. Byun, L.L. Snead, Irradiation hardening in unalloyed and ODS molybdenum during low dose neutron irradiation at $300^{\circ}C$ and $600^{\circ}C$, J. Nucl. Mater. 382 (2008) 1-23. https://doi.org/10.1016/j.jnucmat.2008.08.052
  6. T.S. Byun, M. Li, B.V. Cockeram, L. Snead, Deformation and fracture properties in neutron irradiated pure Mo and Mo alloys, J. Nucl. Mater. 376 (2008) 240-246. https://doi.org/10.1016/j.jnucmat.2008.03.004
  7. B. Cheng, P. Chou, Y.-J. Kim, Characterization of Coated Molybdenum-alloy Cladding for Accident-tolerant Fuel, Progress Report, EPRI, Palo Alto (CA), 2015, p. 3002005557.
  8. G. Liu, G.J. Zhang, F. Jiang, X.J. Sun, J. Sun, Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility, Nat. Mater. 12 (2013) 344-350. https://doi.org/10.1038/nmat3544
  9. Y-J. Kim, B. Cheng, P. Chou, Steam oxidation behavior of protective coatings on LWR molybdenum cladding for enhancing accident tolerance at high temperatures, Paper #A0172, TopFuel, Zurich (Switzerland), September, 2015.

Cited by

  1. Opportunities for the LWR ATF materials development program to contribute to the LBE-cooled ADS materials qualification program vol.482, pp.None, 2016, https://doi.org/10.1016/j.jnucmat.2016.10.012
  2. Performance degradation of candidate accident-tolerant cladding under corrosive environment vol.35, pp.3, 2016, https://doi.org/10.1515/corrrev-2017-0014
  3. Performance degradation of candidate accident-tolerant cladding under corrosive environment vol.35, pp.3, 2016, https://doi.org/10.1515/corrrev-2017-0014
  4. Effects of La2O3 and annealing temperature on grain size and mechanical properties of Mo alloys vol.4, pp.11, 2017, https://doi.org/10.1088/2053-1591/aa977f
  5. Atomic-scale interface structure of a Cr-coated Zircaloy-4 material vol.53, pp.14, 2016, https://doi.org/10.1007/s10853-018-2333-1
  6. Assessment of Neutronic Characteristics of Accident-Tolerant Fuel and Claddings for CANDU Reactors vol.2018, pp.None, 2016, https://doi.org/10.1155/2018/5327146
  7. Development of cold spray process for oxidation-resistant FeCrAl and Mo diffusion barrier coatings on optimized ZIRLO™ vol.507, pp.None, 2016, https://doi.org/10.1016/j.jnucmat.2018.05.014
  8. Oxidation behavior of FeCrAl coated Zry-4 under high temperature steam environment vol.149, pp.None, 2016, https://doi.org/10.1016/j.corsci.2019.01.004
  9. Neutronic and mechanical evaluation of rare earth doped and undoped nitride-based coatings for accident tolerant fuels vol.518, pp.None, 2016, https://doi.org/10.1016/j.jnucmat.2019.02.044
  10. Interface reactions and mechanical properties of FeCrAl-coated Zircaloy-4 vol.519, pp.None, 2019, https://doi.org/10.1016/j.jnucmat.2019.03.004
  11. 200 MeV Ag15+ ion beam irradiation induced modifications in spray deposited MoO3 thin films by fluence variation vol.51, pp.8, 2016, https://doi.org/10.1016/j.net.2019.06.004
  12. Atmospheric pressure plasma jet and minimum quantity lubrication assisted micro-grinding of quenched GCr15 vol.106, pp.1, 2020, https://doi.org/10.1007/s00170-019-04469-5
  13. High-temperature oxidation behavior of HiPIMS as-deposited Cr–Al–C and annealed Cr2AlC coatings on Zr-based alloy vol.528, pp.None, 2016, https://doi.org/10.1016/j.jnucmat.2019.151855
  14. High temperature steam oxidation dynamics of U3Si2 with alloying additions: Al, Cr, and Y vol.533, pp.None, 2016, https://doi.org/10.1016/j.jnucmat.2020.152072
  15. Application and Development Progress of Cr-Based Surface Coatings in Nuclear Fuel Element: I. Selection, Preparation, and Characteristics of Coating Materials vol.10, pp.9, 2016, https://doi.org/10.3390/coatings10090808
  16. High Temperature Anti-Oxidation Behavior and Mechanical Property of Radio Frequency Magnetron Sputtered Cr Coating vol.10, pp.11, 2016, https://doi.org/10.3390/met10111509
  17. Mechanical and chemical properties of PVD and cold spray Cr-coatings on Zircaloy-4 vol.541, pp.None, 2016, https://doi.org/10.1016/j.jnucmat.2020.152420
  18. Synthesis of Functional Surface Layers on Stainless Steels by Laser Alloying vol.11, pp.3, 2016, https://doi.org/10.3390/met11030434
  19. Dynamic strain aging behavior of accident tolerance fuel cladding FeCrAl-based alloy for advanced nuclear energy vol.56, pp.14, 2021, https://doi.org/10.1007/s10853-021-05820-6
  20. Corrosion Behavior of Chromium Coated Zy-4 Cladding under CANDU Primary Circuit Conditions vol.11, pp.11, 2016, https://doi.org/10.3390/coatings11111417
  21. Oxidation behavior of Cr-coated zirconium alloy cladding in high-temperature steam above 1200 °C vol.5, pp.1, 2021, https://doi.org/10.1038/s41529-021-00155-8
  22. Effect of Al Concentration on Microstructure and Properties of AlNbTiZr Medium-Entropy Alloy Coatings vol.14, pp.24, 2016, https://doi.org/10.3390/ma14247661