• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.692-702
• /
• 2001

In this paper, a new block-matching algorithm for standard video encoder is proposed. The algorithm finds a motion vector using the increasing SAD transition curve for each predefined candidates, not a coarse-to-fine approach as a conventional method. To remove low-probability candidates at the early stage of accumulation, a dispersed accumulation matrix is also proposed. This matrix guarantees high-linearity to the SAD transition curve. Therefore, base on this method, we present a new fast block-matching algorithm with the slice competition technique. The Candidate Selection Step and the Candidate Competition Step makes an out-performance model that considerably reduces computational power and not to be trapped into local minima. The computational power is reduced by 10%~70% than that of the conventional BMAs. Regarding computational time, an 18%~35% reduction was achieved by the proposed algorithm. Finally, the average MAD is always low in various bit-streams. The results were also very similar to the MAD of the full search block-matching algorithm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.32-38
• /
• 2007

This paper represents a Doherty amplifier (DPA) with analog predistorter (PD) to improve the linearity of the DPA while preserving the high efficiency. A third-order PD cancels fifth-order intermodulation (IM5) as well as third-order intermodulation (IM3) components by their same phase difference in the PD and DPA. This is accomplished by independently controlling their phase by using the phase-controlled error generator in the PD. Also, we confirm the phase-control ability of the error generator experimentally with a simple and accurate phase measurement setup. For experimental verification, a third-order PD has been implemented and tested in a 180-W DPA at the wide-band code division multiple access (WCDMA) band of 2.11-2.17 GHz. Two-tone test results show that significant cancellation of IM3 and IM5 components can be obtained. For four-carrier WCDMA applications, significant adjacent channel leakage ratio (ACLR) improvement is achieved over a wide range of output power levels. This technique is cost-effective and convenient due to its simple structure, compact size, and three control parameters.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.517-521
• /
• 1999

Gas chromatography using sulfur chemiluminescence detection (GC-SCD) which exhibits very good selectivity, linearity, and sensitivity was applied to the analysis of suIfur compounds in gaseous fuel. The expectmental method used in this study was to resolve the problems of repeatability and reproducibility by means of the adsorption of sulfur compounds, which is different from the existing analysis method of these compounds by GC-SCD. The calibration curves of the standard gases including dimethyl sulfide, t-butylmercaptan and ethyl methyl sulfide exhibited an excellent linearity. As the result of precision tests for the above three compounds, the high reproducibility for tests showed while repeating three times during four days, respectively. In addition, the coefficient of variation was less than 3%. In consequence, the expectmental method of this study is very effective not only with low uncertainty but also with better accuracy, which can quickly determine the concentration of gas odorants in LPG (Liquefied Petroleum Gas) from oil reservoirs and filling stations.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2015

4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), a tobacco specific nitrosamine found only in tobacco products. The ability to monitor biomarker concentrations is very important in understanding environmental tobacco smoke (ETS). In this study, an efficient and sensitive method for the analysis of NNK in dust was developed and validated using liquid chromatography tandem mass spectrometry. Dust was collected with filter paper soaked in methanol. The standard solution and dust sample were diluted with 100 mM ammonium acetate and extracted using dichloromethane. Our calibration curves ranged from 25 to $10^4pg/mL$. Excellent linearity was obtained with correlation coefficient values between 0.9996 and 1.0000. The limit of detection (LOD) was 5 pg/mL ($S/N{\geq}3$) and the retention time was 10 min. The limit of quantification (LOQ) was 25 pg/mL, and the acceptance criteria was the rate of 98-103% (80-120% at levels up to $3{\times}LOQ$). The coefficient of variations (CV) was 2.8%. Accuracies determined from dust samples spiked with four different levels of NNK racurves ranged that from 25 to 104 pg/mL. Excellent linearity was obtained between 92.1% and 114%. The precision of the method was acceptable (5% of CV). The recovery rates of the whole analytical procedure at low, medium, and high levels were 105.7-116.5% for NNK. The carry-over effects during LC-MS/MS analysis were not observed for NNK. This manuscript summarizes the scientific evidence on the use of markers to measure ETS.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.228-238
• /
• 2017

In coastal region, tidal harmonic constants of semi-diurnal tides and nonlinear tides were collected. The observed tide data of KHOA were analyzed by a tide harmonic analysis method. In the southwestern coasts and Han river estuary, nonlinear tides are clearly generated. The generation of tide non-linearity and tide asymmetry is closely related with tide form factor in Korean coastal zone. Tide non-linearity and asymmetry in Mokpo harbour have increased by a series of coastal development projects. The increase has caused rise of high water level and drop of low water level, and increase of tidal range. In Kunsan Outport, tidal range has been declined due to inter-annual change of nonlinear tides after completion of Samangeum sea-dyke.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.1
• /
• pp.104-108
• /
• 2018

The purpose of this study was to establish valerenic acid as a marker compound for the standardization of ethanol extract of Valerinan officinalis (valerian) root as a functional health food. We established valerenic acid as a marker compound using HPLC. HPLC was used to quantify the marker compound in the valerian extract after validation of methods with linearity, accuracy, and precision. The specificity for retention time was met by comparative analysis of the valerian extract and standard compound using HPLC. The method showed high linearity of the calibration curve with a coefficient of correlation ($R^2$) of 0.9999. The limit of quantification (LOQ) was $10{\mu}g/mL$. The accuracy of measurement was 99.88~00.68% and the relative standard deviation (RSD) value was 0.59%. In addition, our analytical method yielded a 29% mean content of valerenic acid in the valerian ethanol extract. These results indicate that the established HPLC method facilitated the determination of marker compounds in the valerian extract for the standardization of health functional foods.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.3
• /
• pp.408-415
• /
• 2018

This study aimed to investigate the changes in the ${\gamma}$-aminobutyric acid (GABA) content of bitter melon (Momordica charantia L.) cultivated from different regions, with different harvest times and at various maturation stages. Methods for observing the changes in GABA content were validated by determining the specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), and precision and accuracy using the HPLC-FLD system. Results showed high linearity in the calibration curve with a coefficient of correlation ($R^2$) of 0.9999. The LOD and LOQ values for GABA were 0.29 and $0.87{\mu}g/mL$, respectively. The relative standard deviations for intra- and inter-day precision of GABA were less than 5%. The recovery rate of GABA was in the range of 98.77% to 100.50%. The average content of GABA was 0.93 mg/g and Cheongju showed highest GABA content of 1.88 mg/g. As the time of harvest increased from May to September, the GABA content decreased from 1.56 to 0.86 mg/g. Also, maturation of the bitter melon fruit was associated with a decreased in GABA content.

• YAKHAK HOEJI
• /
• v.55 no.1
• /
• pp.64-68
• /
• 2011

In this study, a high performance liquid chromatography-diode array detector method was established, for simultaneous determination of three compounds, berberine, palmatine and geniposide in Hwangryunhaedok-tang, To develop and validate method, $C_{18}$ column (5 ${\mu}M$, 4.6 mm${\times}$250 mm) was used with gradient mobile phase, water containing 0.1% trifluoroacetic acid (TFA) and MeOH at the column temperature of $30^{\circ}C$. UV wavelength was set at 230 and 280 nm. Validation of the chromatography method was evaluated by linearity, precision and accuracy test. Calibration curve of standard components showed good linearity ($R^2$ > 0.9999). The limits of detection (LOD) and limits of quantification (LOQ) varied from 0.05 to 0.17 ${\mu}g/ml$ and 0.15 to 0.53 ${\mu}g/ml$, respectively. The relative standard deviations (RSDs) data of intra-day and inter-day test were in less than 2.99% and 1.90%, respectively. The results of the accuracy test were in the range of 98.36 to 102.52% with RSDs values 0.32 to 1.98%. The results of validation indicated that this method was a very accurate and sensitive assay.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.32-37
• /
• 2007

A DMB CMOS power amplifier (PA) with high efficiency and linearity is present. For this work, a 0.13-um standard CMOS process is employed and all components of the proposed PA are fully integrated into one chop including output matching network and adaptive bias control circuit. To improve the efficiency and linearity simultaneously, an adaptive bias control circuit is adopted along with second harmonic termination circuit at the drain node. The PA is shown a $P_{1dB}$ of 16.64 dBm, power added efficiency (PAE) of 38.31 %, and power gain of 24.64 dB, respectively. The third-order intermodulation (IMD3) and the fifth-order intermodulation (IMD5) have been -24.122 dBc and -37.156 dBc, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.380-386
• /
• 2006

Electric fuel sender fur the vehicle fuel gauge system was designed and fabricated based on the CPW(Co-Planer Waveguide) transmission line theory. It is applied on this system that characteristic impedance of RF transmission line can be varied by the surrounded material of the line. By the characteristic impedance owing the level of gasoline or diesel fuel in vehicle fuel tank, CPW line has corresponding reflected signal as much as changed impedance. Detected signal is amplified, and delivered to fuel indicator into cluster unit on dash board. Conventional floating mechanical buoy level gauge has several defects as low reliability and high break down rate by mechanical operation, and has not good linearity for the fuel level difference. CPW line with electric circuits are constructed on 1.6 mm thickness epoxy substrate, and measurement shows that this system has more accurate level and better linearity than conventional mechanical system. New electric fuel sender which has good productivity with long lifetime and low-in-cost by the SMT chip assembling could be replaced this system with conventional floating buoy system.