• 한국재료학회지
• /
• 제4권5호
• /
• pp.516-523
• /
• 1994

이논문에서는 metal organic chemical vapor deposition(MOCVD)에 의해서 성장된 InGaAsP/InP이종접합구조의 격자부정합이 Photoluminescence(PL)효율에 미치는 영향을 연구하였다. 격자부정합은 (400)과 {511} x-ray reflection을 통해 측정하였고, 부정합 전위의 유무는 x-ray to-pography와 PL imaging을 통해 확인했다. PL강도 측정결과, 상대적으로 높은 PL강도는 탄성적으로 스트레인을 받은 시료에, 낮은 PL강도는 전위로 인해 비탄성적으로 변형된 시료에서 얻어졌다. 성장온도에서 격자정합된 시료의 PL효율이 실온에서 가장 높은 것을 알 수 있었다. PL강도와 X-ray반치폭과 관계에서, 시료의 광전자 특성이 구조적 특성과 밀접하게 연관됨을 알 수 있었다.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.228-232
• /
• 2019

Copper electroplating and electrode patterning using a screen printer are applied instead of lithography for heterostructure with intrinsic thin layer(HIT) silicon solar cells. Samples are patterned on an indium tin oxide(ITO) layer using polymer resist printing. After polymer resist patterning, a Ni seed layer is deposited by sputtering. A Cu electrode is electroplated in a Cu bath consisting of $Cu_2SO_4$ and $H_2SO_4$ at a current density of $10mA/cm^2$. Copper electroplating electrodes using a screen printer are successfully implemented to a line width of about $80{\mu}m$. The contact resistance of the copper electrode is $0.89m{\Omega}{\cdot}cm^2$, measured using the transmission line method(TLM), and the sheet resistance of the copper electrode and ITO are $1{\Omega}/{\square}$ and $40{\Omega}/{\square}$, respectively. In this paper, a screen printer is used to form a solar cell electrode pattern, and a copper electrode is formed by electroplating instead of using a silver electrode to fabricate an efficient solar cell electrode at low cost.

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.74-81
• /
• 2021

Silicon (Si) is recognized as a promising anode material for high-energy-density lithium-ion batteries. However, under a condition of electrode comparable to commercial graphite anodes with low binder content and a high electrode density, the practical use of Si is limited due to the huge volume change associated with Si-Li alloying/de-alloying. Here, we report a novel core-shell composite, having a reversible capacity of ~ 500 mAh g-1, by forming a shell composed of a mixture of nano-Si, graphite nanosheets and a pitch carbon on a spherical natural graphite particle. The electrochemical measurements are performed using electrodes with 2 wt % styrene butadiene rubber (SBR) and 2 wt.% carboxymethyl cellulose (CMC) binder in an electrode density of ~ 1.6 g cm-3. The core-shell composites having the reversible capacity of 478 mAh g-1 shows the outstanding capacity retention of 99% after 100 cycles with the initial coulombic efficiency of 90%. The heterostructure of core-shell composites appears to be very effective in buffering the volume change of Si during cycling.

• 대한금속재료학회지
• /
• 제48권5호
• /
• pp.445-448
• /
• 2010

For an enhanced thermoelectric performance, one-dimensional heterostructure nanowires were created that consisted of aBi core and Te shell. The structure was fabricated by depositing Te in-situ onto a Bi nanowire grown by our unique OFF-ON (on-film formation of nanowires) method. After examining a cross-sectional TEM image, it was found that diffusive interface was formed between Bi and Te. Selected area electron diffraction revealed that the crystallinity of the Te shell was some what lower compared to the highly single-crystalline Bi core. The Bi-Te core/shell nanowires can be a smart structure that suppresses phonon transport by several scattering mechanisms, making the OFF-ON method the simplest way to realize that structure.

• 전자통신동향분석
• /
• 제37권5호
• /
• pp.11-21
• /
• 2022

GaN (Gallium-Nitride) is a promising candidate material in various radio frequency applications due to its inherent properties including wide bandgap, high carrier concentration, and high electron mobility/saturation velocity. Notably, AlGaN/GaN heterostructure field effect transistor exhibits high operating voltage and high power-density/power at high frequency. In next-generation radar systems, GaN power transistors and monolithic microwave integrated circuits (MMICs) are significant components of transmitting and receiving modules. In this paper, we introduce technological trends for C-/X-/Ku-band GaN MMICs including power amplifiers, low noise amplifiers and switch MMICs, focusing on the status of GaN MMIC fabrication technology and GaN foundry service. Additionally, we review the research for the localization of C-/X-/Ku-band GaN MMICs using in-house GaN transistor and MMIC fabrication technology. We also discuss the results of C-/X-/Ku-band GaN MMICs developed at Defense Materials and Components Convergence Research Department in ETRI.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.128-131
• /
• 2012

The selective area growth light emitting diode on GaN substrate was grown using mixed-source HVPE method with multi-sliding boat system. The GaN substrate was grown using mixed-source HVPE system. Te-doped AlGaN/AlGaN/Mg-doped AlGaN/Mg-doped GaN multi-layers were grown on the GaN substrate. The appearance of epi-layers and the thickness of the DH was evaluated by SEM measurement. The DH metallization was performed by e-beam evaporator. n-type metal and p-type metal were evaporated Ti/Al and Ni/Au, respectively. At the I-V measurement, the turn-on voltage is 3 V and the differential resistance is 13 Ω. It was found that the SAG-LED grown on GaN substrate using mixed-source HVPE method with multi-sliding boat system could be applied for developing high quality LEDs.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.75-77
• /
• 2012

The AlGaN-based vertical light-emitting diodes (LEDs) on thick GaN epilayer were fabricated by a hydride vapor phase epitaxy with multi sliding boat system. The optical and electrical characteristics of AlGaN-based vertical LEDs were evaluated using a scanning electron microscopy, electroluminescence and I-V measurements. The AlGaN-based vertical LEDs structure has hexagonal symmetry, 500 ㎛ in diameter and above 67 ㎛ in growth thickness. At the room-temperature, the broaded strong peak and relatively high intensity peak were gradually measured at 405 nm with increasing injection current. And a forward operator voltage was measured to be about 7.5 V.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.46-51
• /
• 2023

We investigated the MoS₂ thin film layer by thermolytic deposition and applied it to the silicon solar cells. MoS₂ thin films were made by two methods of dipping and spin coating of (NH₄)₂MoS₄ precursor solution. We implemented two types of substrates of microtextured and nano-microtextured 6-in. Si pn junction wafers. The fabricated MoS₂ thin film layer was analyzed, and solar cells were fabricated by applying the standard silicon solar cell process. The MoS₂ thin film layer of sulfur-deficient form was deposited on the n-type emitter layer, and electrons, which are minority carriers, were well transported at the interface and exhibited photovoltaic solar cell characteristics. The cell efficiencies were achieved at 5% for microtextured wafers and 2.56% for nano-microtextured wafers.

• 한국결정학회지
• /
• 제5권2호
• /
• pp.85-92
• /
• 1994

펄스 레이저 증착법을 이용하여 강유전체 Bi4T13012 박막을 laA109(001) 위에 성장시켰다. 넓은 영역의 온도에서 증착한 박막의 상 형성과 구조적 성질을 X선 회절법을 이용하여 조사하였다. 740℃에서 증착한 박막은 박막의 c-축이 기판에 수직한 형태의 에피 성장의 경향을 보인다. 펄스 레이저 증착법을 이용하여 Bi4Ti3O12/YBa2Cu3O7-x/LaAlO3 복합구조를 in-situ 성장시켰다. Yba2Cu3O7-x의 a-, b-축이 LaAlO3와 완벽하게 평행하게 배열되어 있지 않음에도 불구하고, Bi4Ti3012 박막은 에피 성장의 경향을 보인다.

• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.9-19
• /
• 2002

본 논문에서는 thermionic emission 모델을 이용하여 SCH 양자우물 레이저 다이오드에 대한 L-I-V특성을 해석적으로 도출하였다. SCH의 bulk 캐리어와 양자우물 속박 캐리어의 관계를 도출하였고, 주입된 전류를 각 영역에서의 캐리어 재결합을 고려한 전류 연속 방정식을 만족하도록 하였다. 또한, high level injection과 전하 중성 조건하에 ambipolar 확산 방정식을 이용하여 캐리어 분포를 고찰하였다. 위 해석적인 모델을 이용하여 계산한 결과, 클래딩 영역의 전위장벽 변화가 전류 전압 특성 변화의 주요 원인으로 나타났다. 또한 thermionic emission에 의한 주입 전류의 forward flux 증가가 캐리어 주입을 증가시키고, 레이저 다이오드의 직렬 저항을 감소시키는 것을 보였다.