• Korean Journal of Environmental Biology
• /
• v.21 no.3
• /
• pp.286-291
• /
• 2003

We investigated the effects of molting-hormone insecticide tebufenozide on D7 (the day of hatching from egg) larvae of the midge Chironomus riparius in growth developments. D7 instar larvae were exposed test concentrations were chosen control, 10${\mu}g \;L^{-1}$, 30${\mu}g \;L^{-1}$, 60${\mu}g \;L^{-1}$ and 100${\mu}g \;L^{-1}$ of tebufenozide. In general, dead larvae showed 16% on the next day after insecticide treatments (D12), and observed 44% from D12 to D16 in this exposed days. Dead larvae of C. riparius was abruptly increased on D12 and also continuously increased along the days in 10${\mu}g \;L^{-1}$ treatments. The converged day was from D12 to D16 at move 30${\mu}g \;L^{-1}$ treatments in this study. Therefore, dead larvae obviously increased along these concentrations of tebufenozide. In control condition,78% of the test individuals have grown the pupae. But the larvae have developed the pupa stage from 5% to 17% of the test organism in 10${\mu}g \;L^{-1}$ and 30${\mu}g \;L^{-1}$ treatments. And 75% of the test individuals was arrived the adult through the molting process in control condition. While the other condition was rarely observed the adult. Usually, the emerged period of the test individuals was gathered the D26-D29 in control. The dead pupa showed from D19 to D20 in 30${\mu}g \;L^{-1}$ treatments, D32 in control and D33 in 10${\mu}g \;L^{-1}$ treatments. The observed periods of dead pupa were D32-D34 in control and D33-D37 in 10${\mu}g \;L^{-1}$ treatments. Consequently, due to molting hormone disruption, development of midge was postponed relatively low concentration such as 10 treatments of tebufenozide.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.599-610
• /
• 2016

This paper reports the results of a systematic review (SR) and meta-analysis research to compare the effect of Kangaroo care, targeting mothers and premature infants. A randomized clinical trial study was performed until February 2015. The domestic literature contained the non-randomized clinical trial research without restriction according to the level of the study design. A search of the Ovid-Medline, CINAHL, PubMed and KoreaMed, the National Library of KOREA, the National Assembly Library, NDSL, KISS and RISS. Through the KMbase we searched and combined the main term ((kangaroo OR KC OR skin-to-skin) AND (care OR contact)) AND (infant OR preterm OR Low Birth Weight OR LBW), ((kangaroo OR kangaroo OR kangaroo) AND (care OR nursing care OR management OR skin contact)) was made; these were all combined with a keywords search through the selection process. They were excluded in the final 25 studies (n=3051). A methodology checklist for randomized controlled trials (RCTs) designed by SIGN (Scottish Intercollegiate Guidelines Network) was utilized to assess the risk of bias. The overall risk of bias was regarded as low. In 16 studies that were evaluated as a grade of "++", 9 studies were evaluated as a grade of "+". As a result of meta-analysis, kangaroo care regarding the effects of premature mortality, severe infection/sepsis had an insignificant effect. Hyperthermia incidence, growth and development (height and weight), mother-infant attachment, hypothermia incidence, length of hospital days, breast feeding rate, sleeping, anxiety, confidence, and gratification of mothering role were considered significant. In satisfaction of the role performance, depression and stress presented contradictory research results for individual studies showing overall significant difference. This study has some limitations due to the few RCTs comparing kangaroo care in the country. Therefore, further RCTs comparing kangaroo care should be conducted.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Journal of Chest Surgery
• /
• v.37 no.6
• /
• pp.482-491
• /
• 2004

Background: The xenogenic or allogenic valves after in Vitro repopulation with autologous cells or in vivo repo-pulation after acellularization treatment to remove the antigenicity could used as an alternative to synthetic polymer scaffold. In the present study, we evaluated the process of repopulation by recipient cell to the acellu-larized xenograft treated with NaCl-SDS solution and grafted in the right ventricular outflow tract. Material and Method: Porcine pulmonary valved conduit were treated with. NaCl-SDS solution to make the grafts acellularized and implanted in the right ventricular outflow tract of the goats under cardiopulmonary bypass. After evaluating the functions of pulmonary valves by echocardiography, goats were sacrificed at 1 week, 1 month, 3 months, 6 months, and 12 months after implantation, respectively. After retrieving the implanted valved conduits, histopathologic examination with Hematoxylin-Eosin, Masson' trichrome staining and immunohistochemical staining was performed. Result: Among the six goats, which had been implanted with acellularized pulmonary valved conduits, five survived the expected time period. Echocardiographic examinations for pulmonary valves revealed good function except mild regurgitation and stenosis. Microscopic analysis of the leaflets showed progressive cellular in-growth, composed of fibroblasts, myofibroblasts, and endothelial cells, into the acellularized leaflets over time. Severe inflammatory respon-se was detected in early phase, though it gradually decreased afterwards. The extracellular matrices were regenerated by repopulated cells on the recellularized portion of the acellularized leaflet. Conclusion: The acellularized xenogenic pulmonary valved conuits were repopulated with fibroblasts, myofibroblasts, and endothelial cells of the recipient and extracellullar matrices were regenerated by repopulted cells 12 months after the implantation. The functional integrity of pulmonary valves was well preserved. This study showed that the acellularized porcine xenogenic valved conduits could be used as an ideal valve prosthesis with long term durability.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.348-353
• /
• 1997

Hydrogenated amorphous carbon(a-C:H) films were deposited on p-type Si(100) by DC saddle-field plasma enhanced CVD to investigate the effect of substrate bias on optical properties and structural changes. They were deposited using pure methane gas at a wide range of substrate bias at room temperature and 90 mtorr. The substrate bias voltage ($V_s$) was employed from $V_s=0 V$ to $V_s=400 V$. The information of optical properties was investigated by photoluminescence and transmitance. Chemical bondings of a-C:H have been explored from FT-IR and Raman spectroscopy. The thickness and relative hydrogen content of the films were measured by Rutherford backscattering spectroscopy (RBS) and elastic recoil detection (ERD) technigue. The growth rate of a-C:H film was decreased with the increase of $V_s$, but the hydrogen content of the film was increased with the increase of $V_s$. The a-C:H films deposited at the lowest $V_s$ contain the smallest amount of hydrogen with most of C-H bonds in the of $CH_2$ configuration, whereas the films produced at higher $V_s$ reveal dominant the $CH_3$ bonding structure. The emission of white photoluminescence from the films were observed even with naked eyes at room temperature and the PL intensity of the film has the maximum value at $V_s$=200 V. With $V_s$ lower than 200 V, the PL intensity of the film increased with V, but for V, higher than 200 V, the PL intensity decreased with the increase of $V_s$. The peak energy of the PL spectra slightly shifted to the higher energy with the increase of $V_s$. The optical bandgap of the film, determined by optical transmittance, was increased from 1.5 eV at $V_s$=0V to 2.3 eV at $V_s$=400 V. But there were no obvious relations between the PL peak and the optical gap which were measured by Tauc process.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.129-138
• /
• 2006

It is expected that the typical lifestyle of the future will be transformed into an opulent and comfortable existence as the quality of life improves due to the increase in household income and reduction in working hours. In the meantime, as the standard of living becomes increasingly more comfortable and plentiful, the toll on physical health becomes magnified as a result of obesity and insufficient exercise caused by super nutrition and change in labor conditions (from physical labor to mental labor). This has instigated a deep awareness in fitness on the part of many people, forcing them to recognize the significance of daily exercise and physical activity. The high annual growth rate in the fitness and athletic apparatus market, which is more than 20%, is attributed to this phenomenon. The Elliptical Cross Trainer(ECT), which has drawn wide attention recently, is a non-impact athletic apparatus that not only promotes exercise of the upper body parts in such sports as skiing but also the exercise of lower parts of the body on a treadmill. It is a type of cross training athletic gear that has been developed for aerobic exercise throughout the entire body. It has already formed a market as big as that of the treadmill in Europe, America, etc. Recently, its demand is growing sharply in the Korean markets as well as those in Northeast Asian countries, Despite such demand increase and expansion, since most of the expensive ECTs are exclusively supplied by suppliers in only a few advanced countries, localization of the ECT is urgently required in order to enhance competitiveness of Korean manufacturers and to expand the market. This paper introduces the process and results of a design-engineering cooperative study that was peformed for the development of the ECT.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.101-112
• /
• 2018

This study was carried out to enhance the competitiveness of blackbox design for domestic and international companies, based on the explosive growth of the blackbox market due to development of blackbox design for vehicle accident prevention and post-treatment. In the past, the blackbox market has produced products indiscriminately to meet the ever-increasing demand of consumers. Therefore, we thought a new design method was necessary to effectively investigate the needs of rapidly changing consumers. In this study, we aimed to identify the best-selling blackbox to understand the design flow, and the optimum area for a blackbox, considering the uniqueness of associated vehicle. Based on discussion with blackbox design experts, we studied the direction of design and the problems with blackbox use, which were reflected in blackbox development. Through this research, two types of design - leading blackbox (A type) and mass production blackbox (B type) - were proposed for compatibility of the blackbox with the car. The leading type of blackbox was positioned so that it was wrapped with the room mirror hinge before the screw was fastened, in order to achieve an integrated design. Therefore, we designed an integrated form and resolved the placement problem of an adhesive blackbox. To blend, the mass production blackbox implemented material and surface processing in the same way with the car, and adopted the slide structure to automatically turn off the main body power when removing the SDcard, reflecting consumer needs. This study considers evolving consumer needs through a case study and collective intelligence and deals with implementation of the whole design process during mass production. In this study, we aimed to strengthen the competitiveness of the blackbox design based on design method and its realization.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.273-278
• /
• 2007

Recently, the demand for the powdered products to process raw grains and vegetables has been expanded, and the growth possibility of their fields(markets) in the future will be highly valued with the westernization of living environment and the change of the dietary life. We have bought and analyzed the 111 products of raw grains and vegetables from the large-sized marts, markets and internet orders from March to October 2006. The rate of moisture content was $1.7{\sim}12.5%$. We also found out that the foods over 10% moisture content was 8 of those samples we bought or collected. Their ash rates were averagely $0.3{\sim}8.6%$. The number of those foods that the alien substances were detected was 2. The tar pigments, artificial sweeteners and sulfur dioxides of components that contained food additives were not detected. Each detection range of Cadmium, Lead and Arsenic of the injurious heavy metals was non-detectable $(nd){\sim}0.55,\;nd{\sim}4.52,\;nd{\sim}0.10mg/kg$, while the average detection content were 0.08, 0.48, 0.01 mg/kg. By investigating the contamination degree of the microflora, we discovered that the number of the aerobic plate count, B. cereus over 1,000 cfu/g and C. perfringens over 100 cfu/g was 36 (32.4%), 9 (8.1%) and zero, and that the whole sanitation condition of the products of powdered raw grains and vegetables circulated in the market was not so good.

• Microbiology and Biotechnology Letters
• /
• v.40 no.2
• /
• pp.128-134
• /
• 2012

Foot and mouth disease (FMD) is one of the most notorious and contagious viral diseases afflicting cloven-hoofed animals. In this study, the physicochemical properties of leachate from a FMD landfill site at 773-1, Waryong, Andong, Korea and the ground water from 777, Waryong, Andong, Korea, were analyzed for 1 year from December $10^{th}$ 2010 to November $17^{th}$ 2011. The leachate was collected from the FMD landfill site during March, May, July, September and November, 2011 and changes in pH, brix, water content, insoluble solids, crude proteins, crude lipids, total and reducing sugars and ash content were determined. Considering the annual profiles of temperature and rainfall at the FMD landfill site, the dramatic changes in the physicochemical properties of the leachate from March to July, and especially from May to July, such as increases in pH, and a rapid reduction of brix and organic matter, may be closely linked to the growth of microorganisms in the leachate. The sharp decreases in the concentration of biominerals, such as Mg, Ca, and Fe from 1073, 4311 and 56.2 ppm in March to 151, 78, and 0.1 ppm in November, further suggest that decreases in organic matter in the leachate result from degradation by microorganisms originating from the intestines of the livestock. Analysis of the profiles of the organic materials in the leachate revealed that the properties of the leachate were similar to those of excremental matter-derived water. These results could be applied to a number of fields for the analysis of organic matter behavior, the development of the degradation process, and risk analysis in the environment for hygiene and food industries, of leachate from FMD landfill sites.

• Applied Biological Chemistry
• /
• v.45 no.1
• /
• pp.11-17
• /
• 2002

Fermentation characteristics with/without nitrogen source and quality of the fruit distillate of Opuntia ficus-indica var. saboten were investigated during the manufacturing process of a Korean traditional liquor. As the fermentation period increased, acidity, brix degree, and alcohol concentration increased, whereas pH and contents of reducing sugar decreased. Acidity, pH, and brix degree were higher, whereas the content of reducing sugar lower, in the nitrogen source-added distillate than in the distillate without nitrogen source. The growth of yeast increased, while that of bacteria decreased; this trend was more prominent with the addition of a nitrogen source. Sojues, distilled from two types of mashes and diluted with $H_2O$ and tails of distillate into 22% alcohol concentration, showed pH $3.7{\sim}4.0$, acidity $0.02{\sim}0.10$, and $5.4{\sim}6.1$ $^{\circ}Brix$. Analysis through GC using direct injection methods revealed common volatile flavor compounds in sojues, including acetaldehyde, acetyl acetone, acetic acid ethyl ester, ethyl alcohol, 2-propyl alcohol, acetone, n-propyl alcohol, butanoic acid methyl ester, 2-phenyl ethanol, thymol, acetic acid phenyl ester, and vanillic aldehyde. As revealed through the sensory evaluation, no significant difference (p>0.05) in overall acceptability was shown among four experimental groups, while color and flavor showed significant differences(p<0.05).