• 한국식물병리학회지
• /
• 제12권3호
• /
• pp.363-367
• /
• 1996

배나무잎 이상반점증상의 이병여부를 조기에 판별할 수 있는 가장 간편한 검정방법을 개발코자 시험하였다. 접목시기는 늦어질수록 병징발현율이 감소하였다. 접목방법은 2중절접, 2중삭아절접 순으로 양호하였으나 숙련된 기술이 필요한 이중절접방법보다 간편한 2중삭아절접 방법이 대량검정에 적합하였다. 이상반점증상의 전염에 필요한 최소 접촉시간은 1일 이상이었고 칼루스가 형성되어 접목부위가 활착된 21일 이후에서 발병이 가장 높았다.

• 한국정보과학회논문지:정보통신
• /
• 제27권1호
• /
• pp.88-97
• /
• 2000

이동 컴퓨팅 기술에 멀티캐스팅 기법을 적용하게 되는 경우, 고정 네트워크에서 멀티캐스트 수행 시 발생하지 않는 여러 문제점들이 발생하게 되는데, 그 중 하나로 이동 호스트가 새로운 셀로 진입할 때 해당 셀에 같은 멀티캐스트 그룹의 멤버가 존재하지 않는다면 호스트가 멀티캐스트 그룹에 새로 가입 할 때 발생하는 참가 지연(join delay)과 접합 지연(graft delay)을 추가적으로 겪게 된다. 뿐만 아니라, 낮은 대역폭과 에러율이 높은 전송 매체의 특성으로 인한 잦은 수신 확인과 패킷 재전송은 많은 부가 트래픽을 발생시킨다. 본 논문에서는 이동 지원국의 신호세기에 따라 이동 호스트가 이동하게 될 셀의 이동 지원국이 미리 멀티캐스트 그룹에 가입하는 예측 가입 기법과 송신자와 이동 지원국, 이동 지원국과 이동 호스트 사이의 수신 확인을 별개로 수행하는 다단계 수신 확인 전략을 제안한다. 이 기법은 주변에 멀티캐스트 그룹의 멤버가 존재하지 않는 셀이 많아지고 이동 호스트의 이동성이 적을수록 좋은 효율을 보인다.

• The Plant Pathology Journal
• /
• 제33권3호
• /
• pp.345-349
• /
• 2017

Tomato chlorosis virus (ToCV), a member of the genus Crinivirus, has caused an epidemic disease in tomato worldwide. ToCV is phloem-limited and transmitted by whiteflies in a semi-persistent manner, but not by mechanical inoculation. Experimental propagation of ToCV has been performed primarily by using whitefly-mediated inoculation. To develop a simple and convenient method for transmission of ToCV, we investigated grafting single-leaflets from tomato plants infected with ToCV to recipient tomato seedlings. Forty-one of 46 tomato seedlings tested were grafted successfully with single-leaflets infected with ToCV. Among them, 36 seedlings (87.8%) were systemically infected with ToCV and developed typical symptoms. Our results demonstrated that single-leaflet grafting could provide a sufficient amount of inoculum for the transmission of ToCV to the grafted seedlings.

• Journal of Periodontal and Implant Science
• /
• 제35권4호
• /
• pp.863-875
• /
• 2005

Bovine bone-derived bone substitutes are widely used for treatment of bone defects in dental and orthopedic regenerative surgery. The purpose of this study was to evaluate the basic characteristics of deproteinized bovine bone mineral as a bone graft substitute. Commercially available products from three different bovine bone minerals-Bio-Oss(GeistlichPharma, Switzerland), BBP(Oscotec. Korea), Osteograf/N-300(Dentsply Friadent Ceramed, USA) - were investigated. They were evaluated by scanning electron microscopy(SEM), energy dispersive X-ray spectrometer(EDS), surface area analysis(BET), and Kjeldahl protein analysis. Cell viability on different products was evaluated by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide(MTT) assay. The results of this study indicated that each bone substitute displayed distinct surface properties. Furthermore, Kjeldahl protein analysis indicated that residual crude proteins are present in deproteinized bovine bone mineral. BBP showed relatively large amount of residual protein, which indicated that the possibility of disease transmission can not be safely ruled out. Based on the results of this study, it is suggested that active quality management is strongly needed in operations that involve processing bovine bone tissue for medical use.

• Archives of Pharmacal Research
• /
• 제29권8호
• /
• pp.712-719
• /
• 2006

In this study, we prepared core-shell type nanoparticles of a poly(DL-lactide-co-glycolide) (PLGA) grafted-dextran (DexLG) copolymer with varying graft ratio of PLGA. The synthesis of the DexLG copolymer was confirmed by $^1H$ nuclear magnetic resonance (NMR) spectroscopy. The DexLG copolymer was able to form nanoparticles in water by self-aggregating process, and their particle size was around $50\;nm{\sim}300\;nm$ according to the graft ratio of PLGA. Morphological observations using a transmission electron microscope (TEM) showed that the nanoparticles of the DexLG copolymer have uniformly spherical shapes. From fluorescence probe study using pyrene as a hydrophobic probe, critical association concentration (CAC) values determined from the fluorescence excitation spectra were increased as increase of DS of PLGA. $^1H-NMR$ spectroscopy using $D_2O$ and DMSO approved that DexLG nanoparticles have core-shell structure, i.e. hydrophobic block PLGA consisted inner-core as a drug-incorporating domain and dextran consisted as a hydrated outershell. Drug release rate from DexLG nano-particles became faster in the presence of dextranase in spite of the release rate not being significantly changed at high graft ratio of PLGA. Core-shell type nanoparticles of DexLG copolymer can be used as a colonic drug carrier. In conclusion, size, morphology, and molecular structure of DexLG nanoparticles are available to consider as an oral drug targeting nanoparticles.

• 멤브레인
• /
• 제21권1호
• /
• pp.39-45
• /
• 2011

원자전달 라디칼 중합(ATRP)에 의해 poly(vinyl chloride) (PVC) 주사슬과 poly(styrene sulfonic acid) (PSSA) 곁사슬로 되어있는 양쪽성 PVC-g-PSSA 가지형 공중합체를 합성하였다. 합성된 고분자 전해질막을 10 wt% $AgNO_3$ 수용액에 담가 은이온으로 이온교환을 하였으며, 환원제를 통하여 은 나노입자를 성장시켰다. UV분광학과 XRD 분석을 통해 은 나노입자 성장을 확인하였다. 투과전자현미경(TEM) 분석결과 $NaBH_4$를 사용하였을 때 10~20 nm 크기의 은 나노입자를 얻는데 가장 효과적임을 알 수 있었다. 또한 은 나노입자의 성장은 환원제의 농도와 환원 시간에 크게 영향을 받았다.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.27-46
• /
• 1996

The purpose of this study was designed to compare with the effects of 4 different surface active bioceramics on the healing process of alveolar bone defects in dogs. Artificial alveolar bone defects depth 4-6mm, width 3-4mm) were created with # 6 round bur at interproximal areas of maxillary canine, maxillary 2nd premolar, mandibular canine, and mandibular 3rd premolar. porous hydroxyapatite(Interpore $200^R$) , 45S5 bioglass, CJ4/lOC crystalline glass, and JJ crystalline glass were implanted in intrabony defects randomly. Experimental groups were divided into 4 categories according to its implant material. After implantation, all groups were examined postoperatively 4 weeks to 12 weeks. 3 dogs was selected randomly and sacrificed after vascular perfusion with 2.5% glutaraldehyde at every 4 weeks. Tissue blocks with surroundig alveolar bone and soft tissues were removed and immersed in formaldehyde/glutaraldehyde fixative. After 20 weeks decalcification with EDTA and formic acid, sections were made and observed under light microscope and transmission electron microscope. In all experimental groups, the encapsulation of inactive connective tissue was observed around graft particles in 4 weeks. As time elapsed, the thickness of surrounding connective tissue was decreased. Osteoconductive bone growth pattern was seen apparently in all groups. CJ4/lOC crystalline glass showed the most active bone formation until 8 weeks. 45S5 bioglass was, however, the most active in new bone formation at 12 weeks. Though there was difference in resorption rate among grafting materials, the size of graft particles was decreased gradually. 45S5 bioglass was resorbed faster than the others. On the other hand, porous hydroxyapatite was degraded most slowly. Phagocytosed particulate matters was observed in the cytoplasm of multinuclear multinuclear giant cell and macrophage under transmission electron microscope. The results suggested suggested that 45S5 bioglass and CJ4/lOC crystalline glass may have some enhanced reparative potential when compared to porous hydroxapatite in the treatment of periodontal defeds. JJ crystalline glass reguires a further investigation of the safety of its use.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권1호
• /
• pp.24-39
• /
• 2000

Various methods and graft materials have been used to fill in the defect adjacent to the implants and considered as clinically acceptable. But it is not clear whether the regenerated bone increases the implant-bone contact and supports the implant. The purpose of this study is to evaluate regenerated bone surrounding implants using bone morphogenetic protein(BMP) and demineralized freeze-dried bone(DFDB), and the interfaces between implants and regenerated bone. bBMP was extracted and partially purified from the bovine bone matrix using heparine chromatography. Demineralized freeze-dried bone was made from the dog. Inactive insoluble collagenous bone matrix(IBM) of dog was used as carrier of bBMP. Interfaces of titanium coated epoxy resin implants were processed for demineralized section for transmission electron microscopy(TEM) and those of screw type implants were for nondemineralized section for light and fluoromicroscopic examination. Implants were inserted in the inferior border of mandible of adult dogs and artificial bony defects($3{\times}3{\times}4mm$) were made at the mesial and distal side of implants. Defects were filled with BMP(BMP group) and DFDB(DFDB group). For the fluoromicroscopic examination, the fluorescent dyes(oxytetracycline, calcein green, alizarin red) were injected 2, 4, 6, 8, 12 weeks after implantation. The experimental animals were sacrificed at the 6th and the 12th week and their mandible were extirpated and processed for examination with light microscopy, fluoromicroscopy and TEM. The obtained results were as follows : 1. By the light microscopic findings, the defects were filled with woven bone at the 6th week and compact bone at the 12th week, and the osseointegrations were seen in both groups. There was no histological difference between them. 2. On the basis of the histomorphometric analysis, BMP group(6th week: 40.25%, 12th week: 56.04%) had higher bony contact ratio than DFDB group(38.37%, 42.63%). There was significant difference between two groups at the 12th week(p<0.05). 3. The amount of bone formation in BMP group was more prominent than in DFDB group. Significant difference was noted among two groups at the 6th and the 8th week(p<0.05). 4. By the transmission electron microscopic findings, $0.4-2{\mu}m$ soft tissue layer was found in adjacent to the interfaces and over the collagen fibrils of bone at the 6th week. However, about 100nm amorphous layer was noted at the interface or collagen fibrils directly extended to the titanium surface at the 12th week. There was no significant difference between two groups. 5. These results suggest that BMP and DFDB can be used as good graft materials in the regeneration of bone adjacent to implant, and BMP is more valuable as a bone inducer than DFDB.

• 멤브레인
• /
• 제21권3호
• /
• pp.222-228
• /
• 2011

Poly(vinyl chloride)-g-poly(oxyethylene methacrylate) (PVC-g-POEM) 가지형 공중합체를 원자전달라디칼 중합을 통해 합성하여 전기변색소자의 전해질에 적용하였다. 가소화된 고분자 전해질은 가소제로서 propylene carbonate (PC)/ethylene carbonate (EC) 혼합물을 도입하여 제조하였으며, Lithium tetrafluoroborate ($LiBF_4$), lithium perchlorate ($LiClO_4$), lithium iodide (LiI) and lithium bistrifluoromethanesulfonimide (LiTFSI)를 사용하여 염의 종류에 따른 영향을 조사하였다. 광각 x-선 산란(WAXS)과 시차주사 열량법(DSC) 측정 결과 고분자 전해질의 구조와 유리전이온도($T_g$)가 변하였고, 이는 POEM 내의 에테르의 산소와 리튬염 사이의 상호작용으로 인해 변했다는 것을 FT-IR 분광법을 통하여 확인하였다. 투과전자현미경(TEM) 측정 결과 PVC-g-POEM 가지형 공중합체의 미세상분리 구조가 PC/EC와 리튬염의 도입에도 변하지 않는 것을 관찰하였다. 가소화된 고분자 전해질은 poly(3-hexylthiophene) (P3HT) 전도성 고분자를 이용한 전기변색소자에 적용되었다.

• 미생물학회지
• /
• 제52권2호
• /
• pp.140-147
• /
• 2016

동물유래성분을 원재료로 사용하는 의료기기는 원료물질 유래 바이러스가 오염될 가능성이 있기 때문에 생산과정 중 바이러스가 오염되지 않도록 하여야 한다. 또한 생산공정은 오염될 가능성이 있는 바이러스들을 불활화하거나 제거하는 공정을 포함하여야 한다. 본 연구를 통해 돼지유래 이종골을 원재료로 사용한 바이러스 안전성이 보증된 치과용 골이식재(THE Graft$^{(R)}$) 제조공정을 개발하였다. THE Graft$^{(R)}$ 제조공정은 30% 과산화수소수와 80% 에탄올을 각각 처리하여 지방을 제거하는 공정과 $1,300^{\circ}C$ 열처리 공정을 통해 콜라겐과 유기물을 제거하는 공정을 포함한다. 또한 최종적으로 생산된 hydroxyapatite 성분의 골이식재에 25 kGy의 감마선을 조사하여 감염성 위해인자를 불활화하는 공정을 포함한다. THE Graft$^{(R)}$의 형태학적 특성을 소유래 hydroxyapatite 성분의 골이식재인 Bio-Oss와 SEM과 TEM을 이용하여 비교한 결과 구조적 특성이 유사함을 확인하였다. $1,300^{\circ}C$ 열처리 공정과 25 kGy 감마선 조사 공정의 바이러스 불활화 효과를 평가하기 위해 transmissible gastroenteritis virus (TGEV), pseudorabies virus (PRV), porcine rotavirus (PRoV), porcine parvovirus (PPV)를 모델 바이러스로 선정하였다. $1,300^{\circ}C$ 열처리 공정에서 TGEV, PRV, PRoV, PPV 모두 검출한계 이하로 불활화되었으며, 바이러스 로그 감소 값은 각각 ${\geq}4.65$, ${\geq}5.81$, ${\geq}6.28$, ${\geq}5.21$이었다. 또한 감마선 조사 공정에서도 TGEV, PRV, PRoV, PPV 모두 검출한계 이하로 불활화되었으며, 바이러스 로그 감소 값은 각각 ${\geq}4.65$, ${\geq}5.87$, ${\geq}6.05$, ${\geq}4.89$이었다. 두 공정에서 TGEV, PRV, PRoV, PPV의 누적 바이러스 로그 감소 값은 각각 ${\geq}9.30$, ${\geq}11.68$, ${\geq}12.33$, ${\geq}10.10$이었다. 이상의 결과에 의하면, THE Graft$^{(R)}$ 제조공정은 바이러스 안전성 보증을 위한 충분한 바이러스 불활화 능력을 가지고 있는 것으로 판단된다.