• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.9
• /
• pp.707-712
• /
• 2008

The fatigue characteristics of a material or a structure are generally derived from fatigue tests of standard specimens. However, test results of standard specimens are different from those of real structures or components. Therefore, to calculate more accurate fatigue life, the geometrical effect and surface condition must be considered by comparing test results of standard specimens with those of real structures or components. Thus the object of this paper is to evaluate the fatigue characteristics of a real waterwork pipe. Also, to evaluate fatigue characteristic based on life distribution, the statistical fatigue characteristics were analyzed by the normal distribution and related data of P-S-N curve.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.361-366
• /
• 2003

For regenerative pump performance test we made 5 times enlarged and 3 different kinds blade types impeller with similarity. Due to geometrical characteristic of regenerative pump, there are two kinds of groups which effect on performance of it. One is geometric shape of impeller blade and the other is clearance and inlet/outlet head loss. To study performance of regenerative pump with impeller shape changes, we tested it with reducing clearance. And we reconcile performance data in the case of zero clearance and zero inlet/outlet head loss. Finally we could verify the influence of each group.

• Computers and Concrete
• /
• v.23 no.3
• /
• pp.171-188
• /
• 2019

This study proposed a new and efficient 2D damage-plasticity model within the framework of Isogeometric analysis (IGA) for the geometrically nonlinear damage analysis of concrete. Since concrete exhibits complicated material properties, two internal variables are introduced to measure the hardening/softening behavior of concrete in tension and compression, and an implicit gradient-enhanced formulation is adopted to restore the well-posedness of the boundary value problem. The numerical results calculated by the model is compared with the experimental data of three benchmark problems of plain concrete (three-point and four-point bending single-notched beams and four-point bending double-notched beam) to illustrate the geometrical flexibility, accuracy, and robustness of the proposed approach. In addition, the influence of the characteristic length on the numerical results of each problem is investigated.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.3
• /
• pp.523-537
• /
• 2011

A receiver operating characteristic (ROC) curve plots the true positive rate of a classier against its false positive rate, both of which are accuracy measures of the classier. The ROC curve has several interesting geometrical properties, including concavity which is a necessary condition for a classier to be optimal. In this paper, we study the nonparametric maximum likelihood estimator (NPMLE) of a concave ROC curve and its modification to reduce bias. We characterize the NPMLE as a solution to a geometric programming, a special type of a mathematical optimization problem. We find that the NPMLE is close to the convex hull of the empirical ROC curve and, thus, has smaller variance but positive bias at a given false positive rate. To reduce the bias, we propose a modification of the NPMLE which minimizes the $L_1$ distance from the empirical ROC curve. We numerically compare the finite sample performance of three estimators, the empirical ROC curve, the NMPLE, and the modified NPMLE. Finally, we apply the estimators to estimating the optimal ROC curve of the variance-threshold classier to segment a low depth of field image and to finding a diagnostic tool with multiple tests for detection of hemophilia A carrier.

• Korean Institute of Interior Design Journal
• /
• v.14 no.2 s.49
• /
• pp.3-11
• /
• 2005

The subject of this paper is to find out the characteristics of Michael Graves' housing design. I collected the information of his designs and teamed his design language through his works on different time. I chose five actual housings for analysis which were built since 1960 when he have started his career. Though analysis of the exterior view, plane figures and the total arrangement photos, I could reached the conclusion. From analysis of this research I could figure out the characteristic of Michael Graves housing design as follows. During his whole working career $(1960\~present)$, his design style has went through distinctive characteristic changes that can be divided into: 1960s to early 1970s, mid and late 1970s, 1980s to as of now. 1960s to early 1970s, during this period his works implicated transparency, openness, consistency, complication, and contrast on space, abstraction, white-color and metaphor. mid and late 1970s, showed the white-color figure put together with geometrical structure and post-modernism styles such as ornamentation, natural and metaphor. 1980s to as of now, implicated ornamentation, natural features, historic background, interconnections, variety, symbolism and tradition.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.1-3
• /
• 1999

EM (ElectroMagnetic) pump is used for the purpose of transporting liquid sodium coolant with electrical conductivity in the LMR(Liquid Metal Reactor). (In the present study, pilot EM pump has been designed by using of equivalent circuit method which is commonly employed to analyze linear induction machines for the test of removal of residual heat. The length and diameter of the pump have fixed values of 840 mm and 101.6 mm each by taking account of geometrical size of circulation loop for the installation of EM pump. Flowrate versus developing pressure is related from Laithwaite's standard design formula and the characteristic analyses of developing force and efficiency are carried out according to change of input frequency. From the characteristic curve, input frequency of 13 Hz is determined as the design frequency. On the other hand, The annular air gap size of 6.05 mm is selected not to bring about too much hydraulic loss. Resultantly design analysis makes pump have the electrical input of 604 VA and the hydrodynamical capacity of 1.3 bars and 40 l/min.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.51-60
• /
• 2004

Ball-end milling is one of the most common manufacturing processes for the parts with sculptured surface. However, the conventional roughness model is not suitable for the evaluation of surface texture and roughness under highly efficient machining conditions. Therefore, a different approach is needed for the accurate evaluation of machined surface. In this study, a new method, named ‘Ridge method’, is proposed for the effective prediction of the geometrical roughness and the surface topology in ball-end milling. Theoretical analysis of a machined surface texture was performed considering the actual trochoidal trajectories of cutting edge. The characteristic lines of cut remainder are defined as three-types of ‘Ridges’ and their mathematical equations are derived from the surface generation mechanism of ball-end milling process. The predicted results are compared with the results of conventional method. The agreement between the results predicted by the proposed method and the values calculated by the simulation method shows that the analytic equations presented in this paper are useful for evaluating a geometrical surface roughness of ball -end milling process.

• Journal of Environmental Science International
• /
• v.21 no.11
• /
• pp.1395-1406
• /
• 2012

The purpose of this study is to analyze the hydraulic characteristics of the ice-harbor fishway by considering its geometrical form and utilize such analysis results as the foundational database to be used when establishing fishways in the future. first of all, the study realizes the same form as an ice-harbor fishway that is currently implemented via a FLOW-3D model and estimated the parameters that were optimal to the numerical mock test. Then, this study analyzed the level of sensitivity of the flow conditions which fluctuated due to the changes in geometrical changes by adjusting the inclination and pocket spacing by using the estimated optimal parameters. As a result, the study arrived at the following conclusions. The vortical velocity increased and had a significant effect on the inclination of the fishway. Furthermore, as the velocity within the vorticity increased due to the narrowed vortical area, it was determined that further studies on vorticities or the determination of the design method for the decrease in vortical velocity were imperative.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.3
• /
• pp.85-93
• /
• 2009

In this study, the ex-formal expressions observed in space form of Korean modern architecture are distributed for characteristic analysis based on the period and type. The result of the study is certified by the work analysis and the result is as follows. Initially, due to the limited materials and influence of western brutalism, the works developed during 1960~70 tend to be plastic and contain expressionism. Around 1980's, the works tend to show forms of amusement and popularity. In 1990's the works show significance in deconstructive expression. From after 2000, ecological concept of architecture was introduced and organic expression started increasing Secondly, the ex-formal expressions are found to be in four different types. The organic expression is shown regardless of the period. In modern days, not only the physical properties of materials, but also the ecological concept is combined with the organic expression and is in increase. The plural expression started appearing after the 1980's and the sculptural diversity is enhancing with the addition of decorative factors or modification of geometrical form. The ex-construction and deconstructive expression show significance in some characteristics such as folding, inclination, and geometrical explosion. The free form and nonlinear expression tend to increase dramatically based on the development of structure technology as well as execution and introduce of the digital design technique.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1363-1370
• /
• 2007

The geometrical structures of pyridazin-3-one derivatives (4,5-dihalopyridazin-3-one and 4-halo-5- alkoxypyridazin-3-one) with various functional and substituent groups were fully optimized using the ab initio Hartree-Fock (HF) and second order Moller-Plesset perturbation (MP2) methods. At the N2-, C4-, and C5- positions on the pyridazin-3-one rings, the structural and electronic features pertaining to the variations of the functional and substituent groups were analyzed, respectively. The trends in the variation of the bond lengths, atomic charges, and energetics (relative energy, binding energy) of the derivatives induced by changing the electron donating functional groups (X1 = OMe, OEt) to electron withdrawing groups (X1 = Cl, NO2) were examined. The variations of the bond lengths, atomic charges, and binding energies with the electron withdrawing strength of the substituent groups (Y = Me → F) were also investigated.