• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.223-228
• /
• 2011

This research was performed to investigate change of green speed according to growth of grass, for this, the method of effective green management for improvement of green speed was searched by investigating green density, soil moisture, surface hardness, and mowing height every day for 6 months. As the result of the study, reliability between, green density, soil moisture, surface hardness, mowing height and green speed were measured to be respectively 0.4742, 0.5690, 0.4632, 0.2806, i.e. soil moisture is considered as the factor which affects green speed the most. Therefore, it will be an advantageous environment to maintain soil moisture a little bit low to improve green speed within the range that does not disrupt the growth of green. In case of green density, it is considered to be effective to get a fast green speed when obtaining enough density during May~June, the most vigorous growth period and at the same time green up period. Surface hardness was confirmed that management work as rolling is a considerably effective method to increase hardness. However, rolling gives high stress to the green, combining another management work as regular hilling could be a good alternative. Reliability of green preview and green speed was 0.2806, lower than soil moisture or surface hardness. Through the results, it was confirmed that management of mowing height to be low less than 3.00 mm is helpful to improve green speed, timely, and it is advantageous to manage green speed when adjusting mowing height during the vigorous growth period of bent grass. However, considering the range of mowing height was not various, being 2.9~3.4 mm, henceforth research on investigation of green speed at more various mowing heights would be necessary. Consequently, except mowing height, other three factors, i.e. green density, soil moisture and surface hardness were investigated to have considerable level of reliability on green speed, and it is considered that each factor affects green speed respectively according to green condition and time. Accordingly, in order for the manager to maintain high speed all year round, intensive care for each factor per time unit considering green growth condition is considered to be necessary.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.1
• /
• pp.113-120
• /
• 2009

This study was performed to investigate the effects in inflammatory and pain status on rheumatoid arthritis(RA) induced rats by swimming exercise and Achyranthes Radix(AR) extracts ointment according to the application methods with the change of motor-behavioral and histochemistry study through the change of safranin o-fast green stain in the knee joint and prostaglandin $E_2(PGE_2)$ concentration production in serum for 28 days. They were randomly divided into four groups; Group I: RA induction, Group II: application of only swimming exercise after RA induction, Group III: application of only AR extracts ointment after RA induction, Group IV: application of both AR extracts ointment and swimming exercise after RA induction. The following results were obtained. Volume change of hind paw edema and arthritis indices test and arthritic dorsal flexion & plantar flexion pain test, group II, III, IV were showed that significantly decrease to each scores compared with group I (p<.01). Safranin o-fast green stain were showed histological indices, group II, III, IV were showed that significantly decrease the scores of cellular infiltration and synovial hyperplasia(p<.05), pannus formation and cartilage destruction(p<.01) compared with group I. Group IV were the most decreased compared with group II, III. The $PGE_2$ concentration of the group II, III, IV were decreased compared to the group I (p<.01) In conclusion, swimming exercise and AR extracts ointment acts were the most therapeutic intervention in inflammatory and pain control of RA induced rats.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.357-362
• /
• 1992

To understand water flow path in the cells of Robinia pseudoacacia and Pyrus ussuriensis and obtain color wood from them, this experiment was performed by penetrating 0.5% acidic fuchsin and 0.5% fast green solution into the living wood of them. A comparison was made of the wood structure and water flow path from Robinia pseudoacacia containing the ring-porous wood with tyloses, and Pyrus ussuriensis including solitary diffuse-porous wood with distinct fiber pits. The dye penetrated into vessel elements in the early wood of two growth rings from bark in Robinia pseudoacacia, but permeated all xylem in fonts ussuriensis. In Robinia pseudoacacia, the vessels of heart wood and intermediate wood were not stained because of tyloses.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.1-12
• /
• 2003

In this study I surveyed the dress and the color symbolism of Scarlett and Melanie in the movie "Gone with the Wind" based on the novel by Margaret Mitchell. In investigating the dress and the color symbolism, I analyzed Scarlett and Melanie's image as described in the novel, and examined how the symbolic imagery is represented through coloration based on the DVD reproduction of the movie "Gone with the Wind" originally produced in 1939. In her novel, the author Margaret Mitchell introduced two women, Scarlett and Melanie, whose respective image sharply contrasts with each other. To express Scarlett's young, vigorous, lusty, and vivacious image, she uses green to depict the character, clothing, and background on the whole. Black, which mainly expresses the death image of the mourning dress. Red symbolizes her fast and lavish image. On the other hand, gray is used to describe Melanie's sedate, shyness, and modest image while alluding to her gloomy atmosphere. Brown symbolizes her sedate and plain image in the novel. In the movie, green symbolizes Scarlett's overwhelming image of youth and liveliness as also depicted in the novel. Melanie, however, seems to appear consistently in gray-blue or purple dresses to reflect her image of modesty, sedation and dignity. Melanie's blue image contrasts with Scarlett's blue image in that the latter is used to hint at the omen to a tragedy to come. Red is used to express Scarlett's passionate and fast image. Black symbolizes death or mourning in the movie.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.361-366
• /
• 2009

Layered-earth Green's functions in electormagnetic (EM) surveys play a key role in modeling the response of exploration targets. They are computed through the Hankel transforms of analytic kernels. Computational precision depends upon the choice of algebraically equivalent forms by which these kemels are expressed. Since three-dimensional (3D) modeling can require a huge number of Green's function evaluations, total computational time can be influenced by computational time for the Hankel transform evaluations. Linear digital filters have proven to be a fast and accurate method of computing these Hankel transforms. In EM modeling for 3D inversion, electric fields are generally evaluated by the secondary field formulation to avoid the singularity problem. In this study, three components of electric fields for five different sources on the surface of homogeneous half-space were derived as primary field solutions. Moreover, reflection coefficients in TE and TM modes were produced to calculate EM responses accurately for a two-layered model having a sea layer. Accurate primary fields should substantially improve accuracy and decrease computation times for Green's function-based problems like MT problems and marine EM surveys.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1025-1031
• /
• 2009

Several kinds of biodegradable hydrogels were prepared via in situ photopolymerization of Pluronic F127/poly($\varepsilon$-caprolactone) macromer and acrylic acid (AA) comonomer in aqueous medium. The swelling kinetics measurements showed that the resultant hydrogels exhibited both thermo- and pH-sensitive behaviors, and that this stimuli-responsiveness underwent a fast reversible process. With increasing pH of the local buffer solutions, the pH sensitivity of the hydrogels was increased, while the temperature sensitivity was decreased. In vitro hydrolytic degradation in the buffer solution (pH 7.4, $37^{\circ}C$), the degradation rate of the hydrogels was greatly improved due to the introduction of the AA comonomer. The in vitro release profiles of bovine serum albumin (BSA) in-situ embedded into the hydrogels were also investigated: the release mechanism of BSA based on the Peppas equation was followed Case II diffusion. Such biodegradable dual-sensitive hydrogel materials may have more advantages as a potentially interesting platform for smart drug delivery carriers and tissue engineering scaffolds.

• The Plant Pathology Journal
• /
• v.38 no.6
• /
• pp.679-684
• /
• 2022

Rice blast is one of the most destructive diseases of rice worldwide, and the causative agent is the filamentous ascomycete Magnaporthe oryzae. With the successful cloning of more and more avirulence genes from M. oryzae, the direct extraction of M. oryzae genomic DNA from infected rice tissue would be useful alternative for rapid monitoring of changes of avirulence genes without isolation and cultivation of the pathogen. In this study, a fast, low-cost and reliable method for DNA preparation of M. oryzae from a small piece of infected single rice leaf or neck lesion was established. This single step method only required 10 min for DNA preparation and conventional chemical reagents commonly found in the laboratory. The AvrPik and AvrPi9 genes were successfully amplified with the prepared DNA. The expected DNA fragments from 570 bp to 1,139 bp could be amplified even three months after DNA preparation. This method was also suitable for DNA preparation from M. oryzae strains stored on the filter paper. All together these results indicate that the DNA preparation method established in this study is reliable, and could meet the basic needs for polymerase chain reaction-based analysis of M. oryzae.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.113-123
• /
• 2009

As environmental issues are emerging, many efforts are globally conducted to reduce waste of energies and resources for green growth, as well as low-carbon emitting and replacement of document papers with digital files and images. On the other hand, it may require much time and efforts for users to find the proper image files on the web, where enormous un-standardized digital files are flourishing. Therefore, power and resource consumption may also grow up again in searching and retrieving files. This paper suggests efficient system design and implementation for fast and precise massive image contents retrieval for saving the energies and resources. Eventually it will contribute to green growth in computing environment.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.2
• /
• pp.14-21
• /
• 2015

Design lifetime of a wind turbine is required to be at least 20 years. The most important step to ensure the deign is to evaluate the loads on the wind turbine as accurately as possible. In this study, extreme design load of a offshore wind turbine using Garrad Hassan (GH) Bladed and National Renewable Energy Laboratory (NREL) FAST codes are calculated considering structural dynamic loads. These wind turbine aeroelastic analysis codes are high efficiency for the rapid numerical analysis scheme. But, these codes are mainly based on the mathematical and semi-empirical theories such as unsteady blade element momentum (UBEM) theory, generalized dynamic wake (GDW), dynamic inflow model, dynamic stall model, and tower influence model. Thus, advanced CFD-dynamic coupling method is also applied to conduct cross verification with FAST and GH Bladed codes. If the unsteady characteristics of wind condition are strong, such as extreme design wind condition, it is possible to occur the error in analysis results. The NREL 5 MW offshore wind turbine model as a benchmark case is practically considered for the comparison of calculated designed loads. Computational analyses for typical design load conditions such as normal turbulence model (NTM), normal wind profile (NWP), extreme operation gust (EOG), and extreme direction change (EDC) have been conducted and those results are quantitatively compared with each other. It is importantly shown that there are somewhat differences as maximum amount of 18% among numerical tools depending on the design load cases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.39-44
• /
• 2005

A sheet type of green body was made with the mixture of 60 wt% red clay, 20 wt% fly ash, and 20 wt% stone sludge. Indentations were made on the surfaces of sheets to investigate fracture rate of 1 to 5 mm artificial light-weight aggregates by various drying, breaking, and forming methods. Drying methods of green bodies were natural, electric oven, microwave, and fast drying by torch. Breaking methods of green bodies were ballmill Ⅰ, ballmill Ⅱ, free dropping in the box, and mechanical breaking with roller mill. The depth and width of indent on the surface of the sheet were varied and the thickness of green bodies was also changed to investigate effects of indentation on fracture rates. The highest fracture rate of 42 % among the various drying methods was obtained by microwave drying for 210 sec and the highest fracture rate of 65 % among the various breaking method was obtained by ballmill Ⅱ method. In forming method, an yield of larger aggregates than Ф = 5 mm decreased and that of smaller aggregates than Ф = 5 mm in creased with increasing depth of indentation (only in 3 mm thick green body)and with increasing thickness of green body. The size of aggregates was most homogeneous (by judging from the measurement of aspect ratio of 1 to 5 mm aggregates.) when 3 mm thick green body was rapidly dried by torch and was broken by ballmill Ⅱ method.