• 융합보안논문지
• /
• 제11권2호
• /
• pp.13-24
• /
• 2011

경찰관은 경찰관직무집행법 제10조의2 제1항에 의거하여 현행범인의 경우와 사형 무기 또는 장기 3년 이상의 징역이나 금고에 해당되는 죄를 범한 범인의 체포 도주의 방지, 자기 또는 타인의 생명 선체에 대한 방호, 공무집행에 대한 항거의 억제를 위하여 필요하다고 인정되는 상당한 이유가 있는 때에는 그 사태를 합리적으로 판단하여 필요한 한도 내에서 범인의 제압, 도주방지의 목적으로 수갑, 포승 동의 경찰장구를 사용한다. 그러나 수갑이나 포승을 착용한 상태의 범인이 도주하는 경우가 발생함으로 인하여, 경찰력의 낭비와 국민의 신뢰를 잃게 되고 직무수행에 막대한 지장을 초래하게 된다. 따라서 현재의 도주방지용 경창 장구의 사용체계에서 법의 개정이니 새로운 장비의 개발 없이 간단한 보조장치에 의한 도주방지용 장구착용 범죄인의 도주를 인지할 수 있게 하는 방법이 개발된다면 경찰직무에 실효성이 있을 것이다. 본 논문은 도주방지용 결속장치에 관한 것으로서 현재 사용 중인 수갑 포승 등과 같은 결박 도구에 연결하여 수배자 또는 조사 대상자가 송, 수신기가 설치된 출입문 등을 통과할 경우 경보음 등이 발생함에 따라 내부 근무자에게 인지시켜 수갑 포승 착용자가 도주하는 것을 인지하게 하는 도주방지용 결속장치에 관한 것이다. 본 논문에서 설계한 도주방지용 결속장치는 결박 도구에 장착되는 연결 장치의 연질 튜브(튜브의 내부에 구비되는 인식 태그)와 튜브의 양 끝단을 상호 결합하여 결속되는 결속부 및 상기 결속부를 상기 튜브의 내부에서 상호 연결하는 연결부를 포함한다. 결속부는 기존에 보급된 수갑 포송 등과 같은 결박 도구에 손쉽게 결속할 수 있도록 하면서 착용자가 쉽게 결속 해제할 수 없도록 결속부를 구비하며, 출입구에 매립된 송수신기를 통과할 때 경보음이 발생할 수 있도록 내부에 인식 태그를 구비하여 결박 도구 착용자들의 도주를 인지할 수 있도록 하는 효과가 있다. 또한 휴대용 송수신기와 함께 사용하면 야외 순찰차에도 사용이 가능하고, 증거물 등 외부로의 불법 유출을 손쉽게 감시하는 데에도 활용 할 수 있도록 설계되었다. 그리고 이미 지급된 수갑 포승에 보조적으로 사용이 가능하며 가격이 매우 저렴하다. 또한 탈착이 가능하여 휴대자의 사생활 침해의 소지를 없애고, 연질 튜브의 사용으로 착용자가 자해용 도구로 이용할 수 없게 하였으며, A.M Tag를 사용하여 오작동의 결함을 최소화 하였다.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.59-62
• /
• 2012

This test method covers a procedure for measuring particle removal characteristic of equipment fan filter unit(EFFU) installed inside of semiconductor process equipments, FPD manufacturing equipments and so on. Since EFFU is a combination of air filter and the assembly of fan, motor and frame, the integrity of these parts is very important for the performance of EFFU. So a conventional particle removal test method for air filters is not suitable for EFFU particle removal performance. This test method defines an evaluation method for EFFU which is installed inside an enclosed space to remove particles that are generated inside process equipment. The particle removal performance of EFFUs is usually depending on the performance of filter media and air flow rate. To understand a performance of an EFFU, the filter media characteristic, air flow rate and the integrity of EFFU parts should be considered simultaneously. This test method is intended to demonstrate the system performance of an EFFU and successfully evaluated EFFU performance characteristics.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.73-79
• /
• 2022

In this study, real fire tests were performed on representative combustibles of residential facilities to analyze the fire behavior and combustion characteristics in a small residential space. The considered combustibles were a sofa, a combination of a desk and a chair, and a combination of a mattress and an electric mat. A compartment space fire test was performed using the room corner test equipment prescribed in the KS F ISO 9705 specification. Three real fire tests were conducted by placing the combustible material inside a small compartment with insulation and finishing materials and by igniting the combustible material. Results showed that the peak heat release rate and peak smoke production rate occurred in the combination of the mattress and electric mat. Furthermore, from the result of the fire rate analysis, it was estimated that the fire risk of the mattress and electric mat combination was the highest, followed by the sofa and thedesk and chair combination.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.121-129
• /
• 2000

In this paper, we discuss how to operate a buffer yard in an automated container terminal, which will be used for resolving the difficulties to which the interaction between external manned trucks and internal unmanned equipment led. The determination of fleet size of material handling equipment is an important issue in designing of buffer yard in automated container terminals. This research also addresses the issue of determining buffer capacities through simulation. By using response surface methodology (RSM) for efficient experimentation, the optimal combination of design parameters under applicable operational strategies is obtained.

• Journal of Information Display
• /
• 제7권4호
• /
• pp.17-20
• /
• 2006

The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the large-size AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the $4^{th}$ - $8^{th}$ Generation AMOLEDs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.367-370
• /
• 2003

This study was carried out to suggest the effective reinforcing method which can evaluate the tensile capacity of cast-in-place anchor with cracks. Currently, cast-in-place anchor is used widely for the fastening of equipment in Korean NPPs. 26 test specimens with a single anchor under 4 cracked conditions are prepared using plain concrete. The distance between crack and anchor and reinforcing materials were selected as the main test variable. The tensile force was applied using a actuator with a capacity of 100 tonf using a displacement control method of 0.5 mm/min velocity. Test results from this result show the combination of carbon plate and epoxy will be more available for repair and reinforcement of equipment foundation system in NPPs. Further experimental work is indeed involving the epoxy injection effect and adjustment of reinforcing location of carbon sheet.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3411-3420
• /
• 2014

Deficiencies in wear and frost resistance as well as mechanical strength constitute the main causes of equipment failure under the harsh climatic conditions of the Earth's polar regions. To improve the properties of the materials used in this equipment, nanoparticle composites have been prepared from clays such as kaolinite, hectorite, and montmorillonite in combination with polytetrafluoroethylene (PTFE) or ultrahigh molecular weight polyethylene (UHMWPE). A number of techniques have been proposed to disperse silicate particles in PTFE or UHMWPE polymer matrices, and several successful processes have even been widely applied. Polymer nanocomposites that exhibit enhanced mechanical and thermal properties are promising materials for replacing metals and glass in the equipment intended for Arctic use. In this article, we will review PTFE- and UHMWPE-based layered silicate nanocomposites.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.99-114
• /
• 1994

The introduction of new equipments to strengthen the competitiveness of enterprises is one of pretty important factors. Enterprises introducing new equipments strengthen competitiveness through productivity increasing, high quality maintenance, inventory reduction, improved design and production interface, simple scheduling process, low scrap rate, rework reduction, etc. Managers will work out the best equipment-replacing strategy through the appropriate combination of potential cost attributes and qualitative attributes difficult to quantify in accordance with the business purpose. This study is to present a method to select an equipment-replacing alternative through the decision-making model of Analytic Hierarchy Process in consideration of the differences of cost flow of the alternatives, taking into consideration tangible attributes and strategic intangible attributes.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.673-680
• /
• 2019

This study investigates the validity of applying new carbon nanotube (CNT, Carbon Nano Tube) surface heaters, which are applied in combination with various products, to the vessel's materials, and proposes the commercializable products accordingly. In order to actually apply a CNT surface heating system technology to the ship's equipment for the first time in Korea, we carried out the interview of experts in the technology field and the due diligence of the shipyard, and presented the technology road map for the selected three items. Finally, for "Heating System of Ship Fuel Tank" with the highest commercialization potential, we proposed a conceptual diagram to enable the final development of the product through the product analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.595-608
• /
• 1998

A diffuser an important equipment to change kinetic energy into pressure energy has been studied for a long time. Though experimental and theoretical researches habe been done the understanding of energy transfer and detailed mechanism of energy dissipation is unclear. As far as numerical prediction of diffuser flows are concerned various numerical studies have also been done. On the contrary many turbulence models have constraint to the applicability of diffuser-like flows with expansion and streamline curvature. In order to obtain the reliability of k-$\varepsilon$ turbulence model modified combination turbulence models composed of the anisotropic k-$\varepsilon$model modified combination turbulence models composed of the anisotropic k-$\varepsilon$ model with Hanjalic-Launder's preferential normal strain and Pope's vortex stretching mechanism are proposed. The results of the present proposed models prove the fact that the coefficient of pressure and the shear stress are well predicted at the diffuser flow.