• 전산구조공학
• /
• 제4권4호
• /
• pp.97-106
• /
• 1991

주-부 구조물의 진동 특성을 파악하기 위한 새로운 방법인 frequency window method를 다중 지지되고 구조물간의 커플링이 강한 주-부 구조물을 해석하였다. 다항식의 합으로 표현된 특성 방정식과 이 식의 해는 기존의 고유치 해석 방법의 결과와는 다른 새로운 것으로 frequency window method의 주된 장점으로는 공진과 커플링 현상을 정량적으로 파악할 수 있는 피라미터의 정의, 전체 주-부 구조물의 모드특성을 나타내는 해석적인 식과 반복 기법의 도입으로 인한 해석 결과의 정확성등이 있다.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.62-69
• /
• 2006

가로 등방성 복합재료에서 반사되거나 굴절된 파동의 속도와 입자방향, 그리고 진폭을 운동방정식과 구성방정식 그리고 파동수와 진동수로 표현된 변위식을 사용하여 구하였다. Snell 법칙을 사용하여 Eigenvalue 문제를 풀어 파동속도를 구하였으며 그 결과는 T300 Carbon fiber/5208 Epoxy 재료 성질을 이용하여 검증하였다. 이러한 분석은 수분 침수 C-scan을 이용하여 가로등방성 복합재료의 결점을 찾아내는데 응용될 수 있다.

• Wind and Structures
• /
• 제14권4호
• /
• pp.359-381
• /
• 2011

This paper deals with the flutter instability problem of flexible bridge decks in the framework of bimodal-coupled aeroelastic bridge system analysis. Based on the analysis of coefficients of the polynomials deduced from the singularity conditions of an integral wind-structure impedance matrix, a set of simplified formulations for calculating the critical wind velocity and coupled frequency are presented. Several case studies are discussed and comparisons with available approximated approaches are made and presented, along with a conventional complex eigenvalue analysis and numerical results. From the results, it is found that the formulas that are presented in this study are applicable to a variety of bridge cross sections that are not only prone to coupled-mode but also to single-mode-dominated flutter.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.481-490
• /
• 2003

This paper presents an efficient eigensolution method for non-proportionally damped systems. The proposed method is obtained by applying the accelerated Newton-Raphson technique and the orthonormal condition of the eigenvectors to the linearized form of the quadratic eigenproblem. A step length and a selective scheme are introduced to increase the convergence of the solution. The step length can be evaluated by minimizing the norm of the residual vector using the least square method. While the singularity may occur during factorizing process in other iteration methods such as the inverse iteration method and the subspace iteration method if the shift value is close to an exact eigenvalue, the proposed method guarantees the nonsingularity by introducing the orthonormal condition of the eigenvectors, which can be proved analytically. A numerical example is presented to demonstrate the effectiveness of the proposed method.

• Structural Engineering and Mechanics
• /
• 제5권2호
• /
• pp.137-148
• /
• 1997

In computing eigenvalues for a large finite element system it has been observed that the eigenvalue extractors produce eigenvectors that are in some sense more accurate than their corresponding eigenvalues. From this observation the paper uses a patch type technique based on the eigenvector for one mesh quality to provide an eigenvalue error indicator. Tests show this indicator to be both accurate and reliable. This technique was first observed by Stephen and Steven for an error estimation for buckling and natural frequency of beams and two dimensional in-plane and out-of-plane structures. This paper produces and error indicator for the more difficult problem of three dimensional brick elements.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1350-1364
• /
• 2023

2D/1D coupling method is an important neutron transport calculation method due to its high accuracy and relatively low computation cost. However, 2D/1D coupling method may diverge especially in small axial mesh size. To analyze the convergence behavior of 2D/1D coupling method, a Fourier analysis for k-eigenvalue neutron transport problems is implemented. The analysis results present the divergence problem of 2D/1D coupling method in small axial mesh size. Several common attempts are made to solve the divergence problem, which are to increase the number of inner iterations of the 2D or 1D calculation, and two times 1D calculations per outer iteration. However, these attempts only could improve the convergence rate but cannot deal with the divergence problem of 2D/1D coupling method thoroughly. Moreover, the choice of axial solvers, such as DGFEM SN and traditional SN, and its effect on the convergence behavior are also discussed. The results show that the choice of axial solver is a key point for the convergence of 2D/1D method. The DGFEM SN based 2D/1D method could converge within a wide range of optical thickness region, which is superior to that of traditional SN method.

• 지질공학
• /
• 제18권4호
• /
• pp.381-391
• /
• 2008

본 연구에서는 수치해석의 시간차분에서 발생하는 절단오차를 극복하는 방안으로 고유치 기법을 도입하였다. 고유치기법은 모의를 할 때 공간만을 이산화하는 특징을 가지며, 공간적으로 이산화된 방정식을 대각화시킴으로써 선형동력학적 시스템을 분리시킨 후 시간적분을 이용한 계산이 임의의 위치에서 임의의 시간에 대해 개별적으로 또 연속적으로 수행된다. 이러한 고유치기법을 이용하여 오염물 이동을 모의하고 이를 해석해와 비교 검증하였고, 동일한 조건에서 유한요소법을 이용한 수치모형과 고유치 기법을 이용한 용질이동의 예측을 실시한 결과 고유치기법을 이용할 경우 계산시간과 저장용량이 수치모형에 비해 절약됨을 확인할 수 있었다. 고유치 기법을 이용하여 지하유류저장 공동주위의 불균일 유속장에서 용질의 이동을 분석하였다 이 방법이 모의발생에 오랜 시간이 걸리는 문제에 유용하게 사용될 수 있으므로, 공동에 인접한 오염원으로부터 공동의 안전성을 평가하기 위한 민감도 분석에 이 방법을 적용하였으며, 모의결과에 의하면, 종분산지수와 횡분산지수가 각각 50 m, 5 m일 때 공동에 도달하는 시간은 약 50년으로 추정되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.197-202
• /
• 1992

In this paper, we consider the synthesis of mixed H$_{2}$/H$_{\infty}$ controllers such that the closed-loop poles are located in a specified region in the complex plane. Using solution to a generalized Riccati equation and a change of variable technique, it is shown that this synthesis problem can be reduced to a convex optimization problem over a bounded subset of matrices. This convex programming can be further reduced to Generalized Eigenvalue Minimization Problem where Interior Point method has been recently developed to efficiently solve this problem..

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.575-580
• /
• 1992

Mixed H$_{2}$/H$_{\infty}$ robust control synthesis is considered for finite dimensional linear time-invariant systems under the presence of diagonal structured uncertainties. Such uncertainties arise for instance when there is real perturbation in the nominal model of the state space system or when modeling multiple (unstructured) uncertainty at different locations in the feedback loop. This synthesis problem is reduced to convex optimization problem over a bounded subset of matrices as well as diagonal matrix having certain structure. For computational purpose, this convex optimization problem is further reduced into Generalized Eigenvalue Minimization Problem where a powerful algorithm based on interior point method has been recently developed..

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.3991-4002
• /
• 1996

Thermally fully developed and thermally developing laminar flows of a Bingham plastic in a circular pipe have been studied analytically. For thermally fully developed flow, the Nusselt numbers and temperature profiles are presented in terms of the yield stress and Peclet number, proposing a correlation formula between the Nusselt number and the Peclet number. The solution to the Graetz problem has been obtained by using the method of separation of variables, where the resulting eigenvalue problem is solved approximately by using the method of weighted residuals. The effects of the yield stress, Peclet and Brinkman numbers on the Nusselt number are discussed.