• Structural Engineering and Mechanics
• /
• v.69 no.6
• /
• pp.615-626
• /
• 2019

The 3-noded metric Timoshenko beam element with an offset of the internal node from the element centre is used here to demonstrate the best-fit paradigm using function space formulation under locking and mesh distortion. The best-fit paradigm follows from the projection theorem describing finite element analysis which shows that the stresses computed by the displacement finite element procedure are the best approximation of the true stresses at an element level as well as global level. In this paper, closed form best-fit solutions are arrived for the 3-noded Timoshenko beam element through function space formulation by combining field consistency requirements and distortion effects for the element modelled in metric Cartesian coordinates. It is demonstrated through projection theorems how lock-free best-fit solutions are arrived even under mesh distortion by using a consistent definition for the shear strain field. It is shown how the field consistency enforced finite element solution differ from the best-fit solution by an extraneous response resulting from an additional spurious force vector. However, it can be observed that when the extraneous forces vanish fortuitously, the field consistent solution coincides with the best-fit strain solution.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.230-233
• /
• 2005

This paper proposes power qualify assessment using Markov Chain applied to Ergodic theorem. The Ergodic theorem introduces the state of aperiodic, recurrent, and non-null. The proposed method using Markov Chain presents very well generated harmonic characteristics according to the traction's operation of electric railway system. In case of infinite iteration, the characteristic of Markov Chain that converges on limiting probability Is able to expected harmonic currents posterior transient state. TDD(Total Demand Distortion) is also analyzed in expected current of each harmonic. The TDD for power quality assesment is calculated using Markov Chain theory in the Inceon international airport IAT power system.

• Kyungpook Mathematical Journal
• /
• v.28 no.2
• /
• pp.147-154
• /
• 1988

For a positive integer p, $A_p$ will denote the class of functions $f(z)=z^p+\sum\limits^{\infty}_{n=p+1}a_nz^n$ which are analytic in the unit disc U = {z: |z| <1}. For $0{\leq}{\alpha}{\leq}1$, 0<${\beta}{\leq}1$, $0{\leq}{\lambda}$ $S_p({\alpha},{\beta},{\lambda})$ denote the class of functions $f(z){\in}A_p$ which satisfy the condition $\left|\frac{{\frac{zf^{\prime}(z)}{f(z)}}-p}{{{\alpha}{\frac{zf^{\prime}(z)}{f(z)}}+p-{\lambda}(1+{\alpha})}}\right|$<${\beta}$ for $z{\in}U$ In this paper we obtain a representation theorem for the class $S_p({\alpha},{\beta},{\lambda})$ and also derive distortion theorem and sharp estimates for the coefficients of this class.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.983-990
• /
• 2017

This paper proposes a model predictive control based on the discrete Lyapunov function to improve the performance of power electronic converters. The proposed control technique, based on the finite control set model predictive control (FCS-MPC), defines a cost function for the control law which is determined under the Lyapunov stability theorem with a control error compensation. The steady state and dynamic performance of the proposed control strategy has been tested under a single phase AC/DC voltage source rectifier (S-VSR). Experimental results demonstrate that the proposed control strategy not only offers global stability and good robustness but also leads to a high quality sinusoidal current with a reasonably low total harmonic distortion (THD) and a fast dynamic response under linear loads.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.4
• /
• pp.408-413
• /
• 2014

In this paper, we propose a fault diagnosis method based on Park's Vector Approach using the Euler's theorem. If we interpreted it as Euler's theorem, it is possible to easily find the phase angle difference between the healthy condition and the fault condition. And, we analyzed the variation of the phase angle and performed the diagnostic method of the induction motor using feature vectors that were obtained by using a Fourier transform. The analysis of time and speed variation of the motor was performed and, as a result, we could find more soft variations than rough variations. In particular, the analysis of the distortion through each phase shows that two-turn and four-turn shorted motors are linearly separable. In this experiment, we know that the maximum breakdown threshold value for determining steady-state fault detection is 49.0788. Simulation and experimental results show the more detectable than conventional method.

• East Asian mathematical journal
• /
• v.5 no.1
• /
• pp.35-47
• /
• 1989

Let $S_o*({\alpha},{\beta},{\mu})$ denote the class of functions $f(z)=a_1z-{\sum}{\limit}^{\infty}_{n=2}\;a_nz^n$ analytic in the unit disc $U=\{z:{\mid}z{\mid}<1\}$ and satisfying the condition $${\mid}\frac{\frac{zf'(z)}{f(z)}-1}{(1+\mu)\;\beta(\frac{zf'(z)}{f(z)}-\alpha)-(\frac{zf'(z)}{f(z)}-1)}\mid<1$$ for some $\alpha(0{\leq}{\alpha}<1),\;{\beta}(0<{\beta}{\leq}1),\;{\mu}(0{\leq}{\mu}{\leq}1)$ and for all $z{\in}U$. And it is the purpose of this paper to show a necessary and sufficient condition for the class $S_o*({\alpha},{\beta},{\mu})$, some results for the Hadamard products of two functions f(z) and g(z) in the class $S_o*({\alpha},{\beta},{\mu})$, the distortion theorem and the distortion theorems for the fractional calculus.

• East Asian mathematical journal
• /
• v.14 no.1
• /
• pp.107-116
• /
• 1998

This paper deals with functions of the form $f(z)=a_1z-{\sum}{\limits}_{n=2}^{\infty}a_nz^n(a_1>0,\;a_n{\geqslant}0)$ with $(1-{\mu})f(z_0)/z_0+{\mu}f'(z_0)=1(-1. We introduce the class $\varphi({\mu},{\eta},{\gamma},{\delta},A,B;\;z_0)$ with generalized fractional derivatives. Also we have obtained coefficient inequalities, distortion theorem and radious problem of functions belonging to the calss $\varphi({\mu},{\eta},{\gamma},{\delta},A,B;\;z_0)$.

• East Asian mathematical journal
• /
• v.5 no.1
• /
• pp.57-67
• /
• 1989

We introduce a class $L_{\sigma}*({\alpha},{\beta},{\gamma})$ of functions defined by $f*S_{\sigma}(z)$ of f(z) and $S_{\sigma}(z)=z/(1-z)^{2(1-{\sigma})}$. The present paper is to determine extreme point, coefficient inequalities., distortion Theorem and radius of starlikeness and convexity for functions in $L_{\sigma}*({\alpha},{\beta},{\gamma})$. And we give fractional calculus.

• Structural Engineering and Mechanics
• /
• v.26 no.1
• /
• pp.31-42
• /
• 2007

The unsymmetric finite element formulation has been proposed recently to improve predictions from distorted finite elements. Studies have also shown that this special formulation using parametric functions for the test functions and metric functions for the trial functions works surprisingly well because the former satisfy the continuity conditions while the latter ensure that the stress representation during finite element computation can retrieve in a best-fit manner, the actual variation of stress in the metric space. However, a question that remained was whether the unsymmetric formulation was variationally correct. Here we determine that it is not, using the simplest possible element to amplify the principles.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.93-104
• /
• 1991

Limit analysis is based on the duality theorem which equates the least upper bound to the greatest lower bound. In this study, limit analysis of axisymmetric forming problem with workhardening materials is formulated by minimizing the upper bound functional and finite element program is developed for forward estrusion. Limit loads, velocity and flow line fields are directly obtained under various process conditions and deformation characteristics such as strains, strain rates and grid distortion are obtained from the optimum velocity components by numerical calculation. The experimental observation was carried out for extrusion and compared with computed results. The good agreement between theoretical and experimental results is shown that the developed programming is very effective for the analysis of axisymmetric extrusion.