• 제목/요약/키워드: disastrous accident

검색결과 21건 처리시간 0.034초

압력 변화에 따른 SF6 가스의 주파수 스펙트럼 특성 분석 (Characteristics Analysis of Frequency Spectrum with Pressure Variation of SF6 Gas)

  • 윤대희;도영회;송현직;김기채;박원주;이광식
    • 조명전기설비학회논문지
    • /
    • 제20권6호
    • /
    • pp.75-80
    • /
    • 2006
  • 산업현장에서 많이 사용되고 있는 전력기기에 결함이 발생하면 치명적인 사고로 진전되어 경제적, 인적 손실이 발생될 수가 있다. 본 논문은 GIS에 사용되는 절연가스인 $SF_6$의 압력 변화에 따른 부분방전을 모의하고, 발생되는 부분방전 신호를 절연 진단 방법 중 하나인 UHF법을 이용하여 부분방전 시 방사되는 방사전자파의 스펙트럼을 분석해 금속 이물질이 $SF_6$가스 부분방전에 미치는 영향을 측정하였다. 이러한 연구는 현장 GIS 및 $SF_6$가스절연 전력설비에서 내부압력 변화 시 금속 이물질에 의해 발생되는 절연파괴 사고의 방지에 중요한 역할을 할 것으로 사료된다.

Cell Death and Stress Signaling in Glycogen Storage Disease Type I

  • Kim, So Youn;Bae, Yun Soo
    • Molecules and Cells
    • /
    • 제28권3호
    • /
    • pp.139-148
    • /
    • 2009
  • Cell death has been traditionally classified in apoptosis and necrosis. Apoptosis, known as programmed cell death, is an active form of cell death mechanism that is tightly regulated by multiple cellular signaling pathways and requires ATP for its appropriate process. Apoptotic death plays essential roles for successful development and maintenance of normal cellular homeostasis in mammalian. In contrast to apoptosis, necrosis is classically considered as a passive cell death process that occurs rather by accident in disastrous conditions, is not required for energy and eventually induces inflammation. Regardless of different characteristics between apoptosis and necrosis, it has been well defined that both are responsible for a wide range of human diseases. Glycogen storage disease type I (GSD-I) is a kind of human genetic disorders and is caused by the deficiency of a microsomal protein, glucose-6-phosphatase-${\alpha}$ ($G6Pase-{\alpha}$) or glucose-6-phosphate transporter (G6PT) responsible for glucose homeostasis, leading to GSD-Ia or GSD-Ib, respectively. This review summarizes cell deaths in GSD-I and mostly focuses on current knowledge of the neutrophil apoptosis in GSD-Ib based upon ER stress and redox signaling.

미국의 승강기 인증·검사체계의 현황과 시사점 (A Current State and an Implication of an Elevator Certification and Inspection System in U.S.A.)

  • 김영진
    • 한국안전학회지
    • /
    • 제32권3호
    • /
    • pp.99-104
    • /
    • 2017
  • An undeniable reason for elevator accidents is relevant to diverse defects of elevator itself including a fatal flaw in its managing system. In order to prevent and control disastrous accidents, Korean government established brand new department, Ministry of Public Safety and Security(MPSS) in 2014. For the field of elevator accidents, MPSS, hoping to take the lead, tries to reform related law and statutes. At this time, it is worthwhile to review foreign country's precedent to find out its applicable lesson. This study specially focuses on introducing U.S. legal system dealing with elevator safety area from the viewpoint of stressing the identity of local governments such as state, county, city etc. This article mainly reviews these four points: i) a current state of safety code, guide, standard for elevator in U.S.A. ii) an elevator parts certification system under ASME A.17.1, iii) an elevator inspection system in New York City, iv) an implication of an elevator certification and inspection system in U.S.A. to us.

Investigation of Burst Pressures in PWR Primary Pressure Boundary Components

  • Namgung, Ihn;Giang, Nguyen Hoang
    • Nuclear Engineering and Technology
    • /
    • 제48권1호
    • /
    • pp.236-245
    • /
    • 2016
  • In a reactor coolant system of a nuclear power plant (NPP), an overpressure protection system keeps pressure in the loop within 110% of design pressure. However if the system does not work properly, pressure in the loop could elevate hugely in a short time. It would be seriously disastrous if a weak point in the pressure boundary component bursts and releases radioactive material within the containment; and it may lead to a leak outside the containment. In this study, a gross deformation that leads to a burst of pressure boundary components was investigated. Major components in the primary pressure boundary that is structurally important were selected based on structural mechanics, then, they were used to study the burst pressure of components by finite element method (FEM) analysis and by number of closed forms of theoretical relations. The burst pressure was also used as a metric of design optimization. It revealed which component was the weakest and which component had the highest margin to bursting failure. This information is valuable in severe accident progression prediction. The burst pressures of APR-1400, AP1000 and VVER-1000 reactor coolant systems were evaluated and compared to give relative margins of safety.

A Case Study on Engineering Failure Analysis of Link Chain

  • Kim, Tae-Gu;Lee, Seong-Beom;Lee, Hong-Chul
    • Safety and Health at Work
    • /
    • 제1권1호
    • /
    • pp.43-50
    • /
    • 2010
  • Objectives: The objective of this study was to investigate the effect of chain installation condition on stress distribution that could eventually cause disastrous failure from sudden deformation and geometric rupture. Methods: Fractographic method used for the failed chain indicates that over-stress was considered as the root cause of failure. 3D modeling and finite element analysis for the chain, used in a crane hook, were performed with a three-dimensional interactive application program, CATIA, commercial finite element analysis and computational fluid dynamic software, ANSYS. Results: The results showed that the state of stress was changed depending on the initial position of the chain that was installed in the hook. Especially, the magnitude of the stress was strongly affected by the bending forces, which are 2.5 times greater (under the simulation condition currently investigated) than that from the plain tensile load. Also, it was noted that the change of load state is strongly related to the failure of parts. The chain can hold an ultimate load of about 8 tons with only the tensile load acting on it. Conclusion: The conclusions of this research clearly showed that a reduction of the loss from similar incidents can be achieved when an operator properly handles the installation of the chain.

국지지역에서의 안전운전 지원을 위한 경보정보 설계 (Amber Information Design for Supporting Safe-Driving Under Local Road in Small-scale Area)

  • 문학룡;류승기
    • 한국ITS학회 논문지
    • /
    • 제9권5호
    • /
    • pp.38-48
    • /
    • 2010
  • 이상기후는 도로교통 사고 위협요소로써 빈번하게 심각한 영향을 주고 있다. 특히, 도로교통에서 기상변화 또는 재해에 의한 영향은 장대교량, 터널, 사면 및 결빙 지역에서 영향이 크기 때문에 이들 지역에 대한 관심 있는 관리가 필요하며 발생할 수 있는 사고를 줄이기 위해서도 집중적인 도로 관리와 도로 기상 정보 제공 및 조기 경보, 도로 순찰, 교통통제와 같은 요소들이 필요하다. 도로의 눈과 결빙은 제설로 위험을 줄일 수는 있으나, 강풍은 피할 수 없는 요소이다. 본 연구에서는 도로 기상 정보와 기후, 재해 정보를 활용하여 국지 지역에서 안전운전을 위한 경보 정보를 설계를 하고자 한다. 극한 기상에 노출된 운전자를 위한 최상의 경보 정보 설계는 도로 상황 감시 개선, 도로 기상정보 감시, 정확한 사용자 정보전달들이 될 것이며, 또한 바람 및 재해 상황에 대한 통계, 표면 조건 통계, 차종 및 차종에 따른 바람에 의한 사고 통계와 조기 경보 정책과 교육들도 이를 위해서는 수반되어야 할 요소들이다.

국내 재난관련 공공 앱의 활성화 방안 연구 (Activation Strategies of the Disaster Public-Apps in Korea)

  • 신동희;김용문
    • 한국콘텐츠학회논문지
    • /
    • 제14권11호
    • /
    • pp.644-656
    • /
    • 2014
  • 최근 들어 이어지는 대형 안전사고는 공공 및 민간 영역에 걸쳐 발생하는 가운데, 초동 대처의 부실로 인해 많은 인명과 재산의 손실을 가져오고 있다. 부지불식간에 비상사태가 발생할 경우 신속한 신고 접수 및 정확한 현장 상황 전파와 같은 초기 대응만 제대로 이루어진다면 그 피해를 최소화할 수 있다. 이러한 안전사고와 재난 재해로부터 선제적 대응 및 예방에 스마트폰 기반 모바일 재난관련 앱의 역할이 중요해지고 있다. 이러한 관점에서 본 연구는 재난에 효과적으로 대처하기 위해 개발된 국내 재난관련 공공 앱서비스의 현황 및 이용 실태를 조사하였다. 재난 안전 분야 공공 앱은 보급 초창기로 사용자들에게 어떠한 요인이 앱 서비스의 이용에 중요한 영향을 미치는지를 밝히고자 하였다. 이를 토대로 현재 운용중인 재난관련 공공 앱의 문제점과 개선 방향을 제시하고, 향후 개발되어질 공공 앱의 서비스 방향과 이용 활성화 방안을 모색하고자 하였다. 연구결과, 사용자 측면의 신속성과 콘텐츠 측면의 신뢰도가 재난앱 활성화를 위해 가장 시급하고도 중요도 높은 요인으로 도출되었다.

터널 방재설비의 합리적 설치를 위한 분석적 연구 (An analysis study for reasonable installation of tunnel fire safety facility)

  • 박진욱;유용호;박병직
    • 한국터널지하공간학회 논문집
    • /
    • 제17권3호
    • /
    • pp.243-248
    • /
    • 2015
  • 최근 국내에서는 도로 및 철도 터널의 건설이 꾸준히 증가하고 있으며, 교통체증 해소 및 도시계획 그리고 개량공사 등에 따라 터널이 더 깊은 지하에 위치하거나 장대화되고 있는 추세이다. 이러한 경우 터널 내부사고 중 인명피해에 가장 큰 위험요소인 화재사고가 발생할 경우 대형사고로 이어질 확률이 굉장히 높아진다. 본 연구에서는 정량적 위험도 분석 기법인 QRA(Quantitative Risk Analysis)를 터널에서의 방재설계에 적용하고자 국내 QRA 사례분석을 수행하고, QRA 기법의 적용 유무에 따른 비용 산출을 비교하였다. 그리고 AHP(Analytic Hierachy Process)기법을 사용하여 터널 방재시설의 위험도 저감 효과를 분석하여 터널 화재시 위험도를 낮출 수 있는 중요 인자들에 대한 우선순위를 제시 하였다. 그 결과로부터 QRA가 적용된 사례에서 상당한 비용절감 효과가 나타났으며, 그로 인해 합리적인 방재시설의 설계가 가능할 것으로 판단하였다. 그리고 방재시설별 비용대비 위험도 저감효과를 통한 방재시설 우선순위는 송수관설비, 비상조명, 대피통로, 제연설비의 순으로 분석되었다.

능동형 피난유도기기와 실시간 피난경로생성 기술을 적용한 여객선 스마트 인명대피 시스템 (Smart Escape Support System for Passenger Ship : Active Dynamic Signage & Real-time Escape Routing)

  • 최장원;양찬수
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2017년도 추계학술대회
    • /
    • pp.79-85
    • /
    • 2017
  • 여객선 위험상황 발생 시, 선장 및 승무원들이 신속하고 정확하게 대피안내를 하였는지 여부는 매우 중요하다. 그렇지 못할 경우 세월호 사고와 같이 엄청난 참사를 유발할 수 있기 때문이다. 선장의 대피 의사결정이 지연되고 대피 상황에서 승객들을 안내할 승무원들도 부족한 상황에서 수많은 희생자가 발생한 것은 어쩌면 당연한 결과라고 볼 수 밖에 없다. 여객선 설계 단계에서 구조적, 물리적으로 비상 대피 경로를 반영하고는 있지만, 실제 대피 상황에서 많은 수의 승객들에게 올바른 대피 안내를 제공하는 것은 여전히 간단한 문제가 아니다. 승객들은 공포심에 당황하여 잘못된 방향으로 대피할 수도 있고, 혼잡한 대피상황은 더욱 상황을 악화시킨다. 승무원들도 당황할 수 있는 실제 위험 상황에서 기존의 피난 유도등이나 피난 유도선, 그리고 소수의 훈련 받은 승무원들만으로는 많은 수의 승객을 효과적으로 대피시키기 어려운 현실이다. 여객선 스마트 인명대피 시스템은 2016년부터 4개년 해양수산부 연구개발 과제로 개발 중에 있으며, 대피 경로상의 주요 지점에 설치되는 다수의 능동형 피난유도 장치, 사물인터넷 무선통신기술 LoRa, 실시간 대피경로를 생성 서버, 시각화 관제소프트웨어 등으로 구성된다.

  • PDF

해양 선박재난 대응을 위한 거버넌스 법제 연구 (Study on Governance Legislation for Responses to Maritime Ship Disasters)

  • 방호삼;하민재
    • 해양환경안전학회지
    • /
    • 제28권2호
    • /
    • pp.334-345
    • /
    • 2022
  • 「재난 및 안전관리 기본법」시행령 제3조의2에 따르면, 현행 해양사고 주관기관이 이원화되어 있다. 해양사고 주관기관이 사고 현장대응기관인 해경과 정부 부처인 해양수산부로 나뉘어져 있어 혼선이 일어날 여지가 있다. 대규모 해양사고 대응에서는 전권을 가진 전문성 있는 인사를 선임하고 권한과 책임의 명확화, 주도-지원 관계 설정의 명확화 그리고 지휘체계의 단순화를 보장한다면 효율적인 선박재난 대응이 이루어질 수 있다. 해양 선박재난 관리에서 예방-대비-대응-복구의 모든 단계가 유기적이며 일관성 있게 추진되는 것이 바람직하다. 재난상황에서 신속하고 효율적인 대응을 위해 의사결정과 지휘체계를 단순화하는 것은 중요하다. 또한 지휘체계의 구축과 의사결정이 전문성에 기반하고 독립적으로 이루어지도록 하는 것도 중요하다. 미국의 경우에는 재난의 양태와 무관하게 연방재난관리청에서 주관하고, 해안경비대(USCG)에서 ICS(Incident Command System) 혹은 UC (Unified Command) 사고관리체계를 근간으로 사령탑을 구성하면서 대응한다. 영국은 해양경비청(MCA)에서 연안경비대(HMCG)를 지휘하며 해양재난대응을 하며, 선박구난관리대표부(SOSREP)라는 해양재난의 지휘·조정 역할을 독립적으로 수행할 수 있는 전권을 가진 직책을 두고 있다. 이러한 제도를 두는 것은 유관기관들 간의 대립 등으로 재난대응이 비효율적으로 흐르는 것을 막고자 하는 취지도 있다. 우리나라도 사례로 든 외국의 경우처럼 해양선박재난대응의 표준화 및 단순화를 추구해야 한다. 이 연구에서는 새로운 대응제도에 대한 검토와 함께 법률(안) 제시가 이루어질 것이다.