• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.19-31
• /
• 1996

Spread spectrum method gurantees good performance in digital communication system under multi-path interference and jamming signals. The purpose of this paper is to develop the wireless modem using DS/SS techinque. The transceiver consists of a spread spectrum DQPSK transmitter and a mtching receiver. The system operates with the chipping rate set to 4 Mcps and the number of chips/symbol at 64, making the data rate 62.5 Kbps using QPSK modilation. The receiver section uses a digital matched filter for fast acquisition of burst signals and uses the comparing the BER of proposed system iwth that of narrow bnd system under various additive white gaussian noises. It is showen that the proposed sysem has better performance than narrow band system. When jamming signals is added to the suggested DS/SS system, we also show that the experimental performance (BER) of the suggested wireless modem is almost same as theroretical performance.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.915-924
• /
• 2016

A digital self-sustained phase shift modulation (DSSPSM) strategy that allows for good soft switching and dynamic response performance in the presence of step variations is presented in this paper. The working principle, soft switching characteristics, and voltage gain formulae of a LLC converter with DSSPSM have been provided separately. Furthermore, the method for realizing DSSPSM is proposed. Specifically, some key components of the proposed DSSPSM are carefully investigated, including a parameter variation analysis, the start-up process, and the zero-crossing capture of the resonant current. The simulation and experiment results verify the feasibility of the proposed control method. It is observed that the zero voltage switching of the switches and the zero current switching of the rectifier diodes can be easily realized in presence of step load variations.

• 방송공학회논문지
• /
• 제8권3호
• /
• pp.250-258
• /
• 2003

최근 디지털 멀티미디어 방송 기술의 발전에 따라 기존 아날로그 방송의 디지털화가 추진되고 있다. 라디오 방송의 경우 국내에서는 Eureka-147 DAB(Digital Audio Broadcasting)시스템을 디지털 라디오 방송 방식으로 결정하였다. DAB는 CD 수준의 고품질오디오는 물론 다양한 데이터 서비스, 우수한 이동수신 성능 등을 제공할 수 있으며, 국내에서는 DAB를 이용한 동영상 멀티미디어서비스의 특성을 강조하기 위해 DMB(Digital Multimedia Broadcasting)로 개칭하였다. 디지털 방송의 경우 송신기 커버리지와 수신품질을 조사하는데 있어서 비트오류율(BER Bit Error Rate) 측정이 필수적이다. 본 논문에서는 지상파 DMB에서의 비트오류율 측정을 위한 효율적인 서브채널 데이터 구조와 알고리즘을 제안하고 실험을 통해 검증하였다. 제안된 방법은 비트오류율 측정을 위한 동기화가 용이한 장점이 있고. 특히 수신에 실패한 CIF(Common Interleaved Frame)의 수를 알아내어 포함된 비트들을 오류로 분류함으로써 정확한 측정 결과를 제공할 수 있다. 이러한 장점으로 인하여 제안된 측정 시스템은 이동 수신으로 인한 채널상황에 변화가 많은 DMB에 더욱 유용하게 적용될 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.45-50
• /
• 2012

무선통신 기술의 발전으로 인해 디지털 라디오 시스템은 아날로그 방송으로 대체되고 있다. In-band 디지털 라디오 시스템은 기존의 아날로그 라디오 주파수를 사용하기 때문에, 기존 방송과의 간섭이 발생할 수 있다. 따라서 디지털 방송을 위해 효과적인 간섭분석은 매우 중요하다. 이 논문에서는 디지털 라디오 시스템의 SINR과 BEP(bit error probability)를 분석하기 위해 각도 효과를 고려한 방법을 제안한다. 여기서 각도 효과는 송신기 주변에 다양한 방향에 수신기가 위치해 있을 때 간섭을 분석할 수 있는 방법을 의미한다. 분석 결과들은 디지털라디오 방송망을 배치하기 위한 기본 정보로 활용될 수 있다.

• 전기의세계
• /
• 제22권1호
• /
• pp.35-41
• /
• 1973

An automatic point traffic control method is recommended for more idealistic traffic flow over coarse road netowrks. The automatic control apparatus recommended, consists of a transceiver, amplifier, digital-to-analog converter, signal light controller for emergency and steady state, and digital counter as monitor. The transmitter sends a signal to the target vy means of Microwave-FM-CW and a diode detector picks up the echo signal. Thus the operation of the entire system will be carried out through an open loop state. Some factors necessary for an ideal detector system are rapid response, longevity and stability. An analytical method of the Doppler effect substitutes the conventional frequency deviation into the amplitude of detector output. The changing rate of amplitude is proportional to the voltage of the detector output. Some induced formula from Maxwell's radiation field theory ensures this new method, and, new method, and proves the fact with an experimental data presentation. Stability depends upon Klystron as an oscillator and a diode as a detector. the transceiver installation affects on the response and sensitivity of the system. In accordance with the detector output, several targets are easily classified by amplitudes on the scope. The traffic flow, i.e., target movement which is analyzed by the amplitude method, is shown through the scope and indicates it on the digital counter. The best efficiency for the amplitude analysis can be attained through use of an antenna having the highest sensitivity.

• 대한전자공학회논문지TC
• /
• 제44권3호
• /
• pp.92-97
• /
• 2007

스위칭 모우드 증폭기를 마이크로파 대역에서 이용하고자 하는 많은 연구가 있으며, 이러한 증폭기 중 E급 증폭기는 이론적으로 스위칭 동작을 통해 100%의 효율을 얻을 수 있다. 본 논문에서는 2.4GHz 대역 마이크로파 E급 증폭기로 출력 전력이 17.6dBm, 66%의 전력부가효율을 갖는 설계된 증폭기를 무선 랜 송신부에서 사용하기 위해 증폭기의 비선형 왜곡을 보상하고자 테이블 참조기법(Look Up Table)을 이용한 기저대역 사전왜곡 기법을 적용하였다. 설계된 증폭기는 -3dBm의 입력 무선랜신호를 인가하였을 때 출력스펙트럼 측정 결과가 IEEE 무선랜 스펙트럼 마스크 표준규격을 만족하며, 기저대역 사전왜곡을 적용하였을 때 중심주파수에서 20MHz offset인 주파수에서 최대 5dB의 ACPR 특성이 향상되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권4호
• /
• pp.552-560
• /
• 2017

This paper presents a transceiver chipset realized in a $0.13-{\mu}m$ CMOS technology for serial digital interface of video data transmission, which compensates the electrical cable loss of 45 dB in maximum at 1.5 Gbps. For the purpose, the TX equips pre-emphasis in the main driver by utilizing a D-FF with clocks generated from a wide-range tuning PLL. In RX, two-stage continuous-time linear equalizers and a limiting amplifier are exploited as a front-end followed by a 1/8-rate CDR to retime the data with inherent 1:8 demultiplexing function. Measured results demonstrate data recovery from 270 Mbps to 1.5 Gbps. The TX consumes 104 mW from 1.2/3.3-V supplies and occupies the area of $1.485mm^2$, whereas the RX dissipate 133 mW from a 1.2-V supply and occupies the area of $1.44mm^2$.

• ETRI Journal
• /
• 제28권1호
• /
• pp.9-16
• /
• 2006

In this paper, we analyzed and measured the electrical crosstalk characteristics of a 1.25 Gbps triplexer module for Ethernet passive optical networks to realize fiber-tothe-home services. Electrical crosstalk characteristic of the 1.25 Gbps optical triplexer module on a resistive silicon substrate should be more serious than on a dielectric substrate. Consequently, using the finite element method, we analyze the electrical crosstalk phenomena and propose a silicon substrate structure with a dummy ground line that is the simplest low-crosstalk layout configuration in the 1.25 Gbps optical triplexer module. The triplexer module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and an analog photodetector as a cable television signal receiver. According to IEEE 802.3ah and ITU-T G.983.3, the digital receiver and analog receiver sensitivities have to meet -24 dBm at $BER=10^{-12}$ and -7.7 dBm at 44 dB SNR. The electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the dummy line with $100\;{\mu}m$ space from the signal lines and 4 mm separations among the devices satisfies the electrical crosstalk level compared to a simple structure. This proposed structure can be easily implemented with design convenience and greatly reduce the silicon substrate size by about 50 %.

• ETRI Journal
• /
• 제29권4호
• /
• pp.421-429
• /
• 2007

This paper presents a direct-conversion CMOS transceiver for fully digital DS-UWB systems. The transceiver includes all of the radio building blocks, such as a T/R switch, a low noise amplifier, an I/Q demodulator, a low pass filter, a variable gain amplifier as a receiver, the same receiver blocks as a transmitter including a phase-locked loop (PLL), and a voltage controlled oscillator (VCO). A single-ended-to-differential converter is implemented in the down-conversion mixer and a differential-to-single-ended converter is implemented in the driver amplifier stage. The chip is fabricated on a 9.0 $mm^2$ die using standard 0.18 ${\mu}m$ CMOS technology and a 64-pin MicroLead Frame package. Experimental results show the total current consumption is 143 mA including the PLL and VCO. The chip has a 3.5 dB receiver gain flatness at the 660 MHz bandwidth. These results indicate that the architecture and circuits are adaptable to the implementation of a wideband, low-power, and high-speed wireless personal area network.

• ETRI Journal
• /
• 제34권2호
• /
• pp.216-225
• /
• 2012

This paper presents a transceiver module for human body communications whereby a spread signal with a group of 64 Walsh codes is directly transferred through a human body at a chip rate of 32 Mcps. Frequency selective digital transmission moves the signal spectrum over 5 MHz without continuous frequency modulation and increases the immunity to induced interference by the processing gain. A simple receiver structure with no additional analog circuitry for the transmitter has been developed and has a sensitivity of 250 ${\mu}V_{pp}$. The high sensitivity of the receiver makes it possible to communicate between mobile devices using a human body as the transmission medium. It enables half-duplex communication of 2 Mbps within an operating range of up to 170 cm between the ultra-mobile PCs held between fingertips of each hand with a packet error rate of lower than $10^{-6}$. The transceiver module consumes 59 mA with a 3.3 V power supply.