• 대한전기학회논문지
• /
• 제36권6호
• /
• pp.437-443
• /
• 1987

Due to the recent development of microprocessor, the digital control is now in use for the practical structure of the control systems, but it leaves the problem of controlling delays caused by computation time when it is applied to the realization problems, such as application method of the control law and controlling effect of continuous control, etc. This paper deals with robust stability of the digital regulator which compensates for the controlling delays by applying prediction values of state.

• 대한전기학회논문지
• /
• 제40권9호
• /
• pp.937-944
• /
• 1991

In digital controller design, the delays in the controller should be taken into consideration when the computation time of the processor is not negligibale compared with sampling time. Recently, Mita has proposed a digital optimal servosystem taking account of the delays in the controller. In this paper, robust stability and diturbance rejection properties of this optimal servosystej are analyzed in the frequency-domain. The well-known asymptotic properties of the optimal regulators with respect to the weighting matrices of the cost functions are successfully utilized to show that the influence of the delays in the controller are drastic for certain choice of the cost function Illustrative numerical examples are presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.336-340
• /
• 2001

In a digital system, there are inevitable delays in calculations and applying the inverter output voltages to the motor terminals. Because of the delays, the conventional predictive current controller implemented in the digital system has large overshoot and large harmonics. A new predictive current controller, considering the delays, for a permanent magnet synchronous motor (PMSM) is presented. The effectiveness and feasibilities are shown by experimental results.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.98-103
• /
• 2012

This paper presents a digital pulse width modulator (DPWM) with a reduced digital modulation delay (a transport delay of the modulator) during the transient response of power converters. During the transient response operation of a power converter, as a result of dynamic variations such as load step-up or step-down, the closed loop controller will continuously adjust the duty cycle in order to regulate the output voltage. The larger the modulation delays, the larger the undesired output voltage deviation from the reference point. The three conventional DPWM techniques exhibit significant leading-edge and/or trailing-edge modulation delays. The DPWM technique proposed in this paper, which results in modulation delay reductions, is discussed, experimentally tested and compared with conventional modulation techniques.

• International Journal of Internet, Broadcasting and Communication
• /
• 제4권2호
• /
• pp.1-6
• /
• 2012

Control Theory for continuous-time system has been well developed. Due to the development of computer technology, digital control scheme are employed in many areas. When delays are in control systems, it is hard to control the system efficiently. Delays by controller-to-actuator and sensor-to-controller deteriorate control performance and could possibly destabilize the overall system. In this paper, a new approximated discretization method and digital design for control systems with multiple state, input and output delays and a generalized bilinear transformation method with a tunable parameter are also provided, which can re-transform the integer time-delayed discrete-time model to its continuous-time model. Illustrative examples are given to demonstrate the effectiveness of the developed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.348-353
• /
• 2003

This paper considers the optimal control problem in real-time control systems with random time-delays. It proposes an algorithm which uses the linear quadratic (LQ) control method and a dedicated technique to compensate for the time-delay effects. Since it is assumed that the time-delays are unknown but the probability distribution of the delays are known a priori, the algorithm considers the mean value of the time-delays as a nominal value for random delay compensation. An example is given to show the performance of the proposed algorithm, where an inverted pendulum system is controlled over a controller-area network (CAN). Simulation results show that the proposed algorithm provides good performance results. It is shown that our algorithm is comparable to existing algorithms in both computation cost and performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.601-617
• /
• 2014

In digital radio broadcasting systems, long delays are incurred in service start time when tuning to a particular frequency because several synchronization steps, such as symbol timing synchronization, frame synchronization, and carrier frequency offset and sampling frequency offset compensation are necessary. Therefore, the operation of the synchronization blocks causes delays ranging from several hundred milliseconds to a few seconds until the start of the radio service after frequency tuning. Furthermore, if spectrum inversed signals are transmitted in digital radio broadcasting systems, the receivers are unable to decode them, even though most receivers can demodulate the spectral inversed signals in analog radio broadcasting systems. Accordingly, fast synchronization techniques and a method for spectral inversion detection are required in digital radio broadcasting systems that are to replace the analog radio systems. This paper presents a joint detection method of frame, integer carrier frequency offset, and spectrum inversion for DRM Plus digital broadcasting systems. The proposed scheme can detect the frame and determine whether the signal is normal or spectral inversed without any carrier frequency offset and sampling frequency offset compensation, enabling fast frame synchronization. The proposed method shows outstanding performance in environments where symbol timing offsets and sampling frequency offsets exist.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.211-216
• /
• 2012

연속시간 시스템의 제어 이론은 잘 개발되어 왔다. 컴퓨터 기술의 발달로 인해 디지털 제어 기법이 여러 분야에 적용되어 왔다. 제어 시스템에 시간 지연이 있는 경우는 시스템을 효율적으로 제어하는 것이 어렵다. 제어기와 액츄에이터 그리고 센서와 제어기 간에 있는 지연은 제어 성능을 떨어뜨리고 전체 시스템을 불안정하게 할 수 있다. 본 논문에서는 다중의 상태, 입력 그리고 출력 지연을 가지는 제어 시스템을 위한 새로운 근사 이산화 방법과 디지털 설계 그리고 조정가능한 계수를 가지는 일반화된 쌍선형 변환 방법을 제안한다. 이 방법은 정수의 시간 지연을 가지는 이산 시간 모델을 동일한 연속 시간 모델로 다시 변환할 수 있다. 실제적인 예제를 통해 제안된 방법의 효율성을 증명한다.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.167-174
• /
• 2015

This study describes how digital time delay deteriorates control performance in zero voltage switching (ZVS) phase-shifted full bridge (PSFB) converter. The small-signal model of the ZVS PSFB converter is derived from the buck-converter small-signal model. Digital time delay effects have been considered according to the digital sampling methods. The analysis verifies that digital time delays reduce the stability margin of the converter, and the double sampling technique exhibits better performance than the single sampling technique. Both simulation and experimental results based on 250 W ZVS PSFB confirm the validity of the analyses performed in the study.

• 조명전기설비학회논문지
• /
• 제23권4호
• /
• pp.39-46
• /
• 2009

본 논문에서는 저항과 클록 주파수 변동에 의한 문제를 효과적으로 감소시킬 수 있는 풀 디지털 정전용량 방식의 터치키를 제안한다. 제안된 방식은 측정하고자 하는 정전용량 두 개와 두 정전용량 사이의 저항으로 구성되어 있으며, 각 정전용량과 저항의 지연을 각각 측정한 후 두 지연의 비를 구한다. 양자화 오차를 무시할 경우 두 지연의 비는 측정하고자 하는 두 정전용량의 비로 표시되어 저항 값과 클럭 주파수와 무관하다. 실험결과에서도 제안된 방법이 저항과 클록주파수에 의한 변동을 효과적으로 줄일 수 있음을 보였으며, 제안된 방법의 정전용량 해상도가 1.04[pF]여서 터치키로 사용될 수 있음을 보였다.