• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.81-86
• /
• 1996

This study was performed to evaluate the reduction in bending properties of radiata pine sapwood associated with incipient brown-rot decay. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested destructively. Brown-rot decay by T. palustris and G. trabeum caused serious reduction in bending properties at very early stages of decay, with about 30 percent decrease in bending strength observed for only 1~2 percent weight loss. In general, the reduction in bending properties caused by T. palustris was somewhat greater than that by G. trabeum. Work to maximum load was reduced most severely and rapidly from the onset of decay, while modulus of elasticity showed a much more moderate rate of reduction. Modulus of rupture was affected by decay to a greater extent than was modulus of elasticity. Since a relatively strong correlation between weight loss and bending strength was observed, the residual strength of decayed wood can be predicted by weight loss due to decay. The results of this study indicate that very early stages of brown-rot decay reduce the bending strength significantly. Thus, it is recommended that all load-bearing members in wooden structures, especially those that are periodically wetted, should be inspected regularly to prevent a sudden failure even though there are no definite signs of decay.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.24-32
• /
• 2008

Artificial brown-rot decay was induced to two wood species, Pinus densiflora and Pinus radiata. A modified direct inoculation method was used and the decay indicators of mass loss and two compressive mechanical properties, maximum compressive strength (MCS) and compressive stiffness, were estimated over the period of 8 weeks of fungal exposure. Measurable mass loss occurred 2 weeks after the fungal attack, with 15% to 22% of the loss occurring 8 weeks after fungal exposure with Fornitopsis palustris and Gloeophyllurn trabeurn. Mechanical properties proved to be far more sensitive than mass loss detection: approximately five to six times by quantity. Of the two mechanical properties, MCS was more sensitive to and consistent with progressive brown-rot decay. An ultrasonic test was performed to determine the feasibility and accuracy of this method for nondestructive detection of brown-rot decay. The ultrasonic test is highly sensitive at qualitative detection of the early stages of brown-rot decay.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.368-371
• /
• 2019

Using first principles calculations we investigated the thermomechanical stability of spent nuclear fuels (SNF), especially how mechanical properties of $UO_2$, such as, bulk, shear and Young's moduli and Poisson's ratio vary through alpha-decay of U into Th with generation of He gas. Our results indicate that substitution of U by Th through alpha decay ($U_{1-x}Th_xO_2$) does not significantly affect the stability of the grain in a fuel matrix. In addition, we studied the transport properties of He in and boundaries of the $U_{1-x}Th_xO_2$ grain. Helium preferentially resides at the grain boundaries through diffusion. Our study can contribute to substantial reduction of environmentally risk and enhancement of our sustainability by safe control of radioactive materials.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.753-761
• /
• 2017

The heartwood (HW) of Japanese cedar (Cryptomeria japonica) has usually a reddish color. But some trees have black-colored heartwood (BHW). BHW of Japanese cedar has a low commercial value because of the appearance. Therefore, in this study, a comparative analysis was conducted to evaluate the differences in the physical, mechanical, and inorganic element properties, and decay resistance of red-colored heartwood tree (RHW) and BHW. The physical properties showed significant difference between sapwood (SW) and HW, but there was no significant difference between RHW and BHW. From the results of mechanical properties, no significant difference was recognized in SW of RHW, HW of RHW, SW of BHW, and HW of BHW. There were decay resistance differences between RHW and BHW in HW, and between HW and SW in both RHW and BHW, respectively. The magnesium (Mg), potassium (K), and calcium (Ca) contents had significant differences between SW and HW in both RHW and BHW. In this present study, the decay resistances and the contents of Mg and K were higher in HW than in SW both for RHW and BHW, while these measurements were lower in RHW than in BHW. Therefore, BHW was considered to be worthy as a high-quality material as RHW.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.26 no.2
• /
• pp.76-107
• /
• 2022

In this paper, we study the temporal decay of global weak solutions to the inhomogeneous Hall-magnetohydrodynamic (Hall-MHD) equations. First, an approximation problem and its weak solutions are obtained via the Caffarelli-Kohn-Nirenberg retarded mollification technique. Then, we prove that the approximate solutions satisfy uniform decay estimates. Finally, using the weak convergence method, we construct weak solutions with optimal decay rates to the inhomogeneous Hall-MHD equations.

• Bulletin of the Korean Mathematical Society
• /
• v.61 no.3
• /
• pp.637-669
• /
• 2024

The goal of this paper is to study decay properties of weak solutions to Cauchy problem of the non-stationary fractional Navier-Stokes equations. By using the Fourier splitting method, we give the time L²-decay rate of weak solutions, which reveals that L²-decay is generally determined by its linear generalized Stokes flow. In second part, we establish various decay results and the uniqueness of the two dimensional fractional Navier-Stokes flows. In the end of this article, as an appendix, the existence of global weak solutions is given by making use of Galerkin' method, weak and strong compact convergence theorems.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.26 no.4
• /
• pp.224-243
• /
• 2022

In this paper, we prove the global existence of classical solutions to the 2D incompressible Boussinesq equations for the micropolar fluid. Furthermore, applying the Fourier splitting methods, we obtain the lager time decay properties.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2910-2917
• /
• 2020

Digital light processing three-dimensional (3D) printing technique is a powerful tool to rapidly manufacture plastic scintillators of almost any shape or geometric features. In our previous study, the main properties of light output and transmission were analyzed. However, a more detailed study of the other properties is required to develop 3D printed plastic scintillators with expectable and reproducible properties. The 3D printed plastic scintillator displayed an average decay time constants of 15.6 ns, intrinsic energy resolution of 13.2%, and intrinsic detection efficiency of 6.81% for 477 keV Compton electrons from the ¹³⁷Cs γ-ray source. The 3D printed plastic scintillator showed a similar decay time and intrinsic detection efficiency as that of a commercial plastic scintillator BC408. Furthermore, the presented estimates for the properties showed good agreement with the analyzed data.

• Agricultural and Biosystems Engineering
• /
• v.1 no.1
• /
• pp.38-42
• /
• 2000

Though the freshness for agricultural products is an important factor related to their quality management, this terminology is being used restrictedly because it is very subjective. In this study, a dimensionless index which had the span of the maximum of 1 through the minimum of 0 was proposed to describe freshness of the product with time-variant quality and was applied to Tsugaru and Fuji apples. First, the compressive properties having the linearity in their change regarding time elapsed after harvest were selected. For Tsugaru apple, bio-yield and rupture forces had high correlation with time while for Fuji, bio-yield and rupture deformations had high correlations. When the slope, or ratio of force to deformation, was considered, the effect of cultivar could be neglected. When the linearly time-variant compressive properties for Tsugaru and Fuji apples were involved in the freshness indices, they described well freshness of apples. Also, the freshness decay constant depicted a characteristic which related to freshness decay rate. Therefore, the freshness index can be utilized to manage the quality during storage and distribution of apples.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.275-282
• /
• 2022

The aim of this work is to develop the fractional Bateman equations, which can model memory effects in successive isotopes transformations. Such memory effects have been previously reported in the alpha decay, which exhibits a non-Markovian behavior. Since there are radioactive decay series with consecutive alpha decays, it is convenient to include the mentioned memory effects, developing the fractional Bateman Equations, which can reproduce the standard ones when the fractional order is equal to one. The proposed fractional model preserves the mathematical shape and the symmetry of the standard equations, being the only difference the presence of the Mittag-Leffler function, instead of the exponential one. This last is a very important result, because allows the implementation of the proposed fractional model in burnup and activation codes in a straightforward way. Numerical experiments show that the proposed equations predict high decay rates for small time values, in comparison with the standard equations, which have high decay rates for large times. This work represents a novelty approach to the theory of successive transformations, and opens the possibility to study properties of the Bateman equation from a fractional approach.