• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권4호
• /
• pp.276-280
• /
• 2016

A fixed rate speech coder based on the filter bank and the non-uniform sampling technique is proposed. The non-uniform sampling is achieved by the detection of inflection points (IPs). A speech block is band passed by the filter bank, and the subband signals are processed by the IP detector, and the detected IP patterns are compared with entries of the IP database. For each subband signal, the address of the closest member of the database and the energy of the IP pattern are transmitted through channel. In the receiver, the decoder recovers the subband signals using the received addresses and the energy information, and reconstructs the speech via the filter bank summation. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is confirmed. The signal-to-noise ratio (SNR) performance of the proposed method is comparable to that of the uniform sampled pulse code modulation (PCM) below 20 kbps data rate.

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.639-650
• /
• 2005

Theoretical and numerical comparison have shown that variable sampling interval (VSI) charts are substantially more efficient than fixed sampling interval(FSI) charts in term of ATS(average time to signal). But the frequency of switching between different sampling intervals is a complicating factor in VSI procedures. VSI EWMA charts for monitoring mean vector of related qualify characteristics are investigated. To compare the efficiencies of the proposed charts, the performances are evaluated for matched FSI and VSI charts in terms of average time to signal(ATS) and average number of samples to signal(ANSS). For the switching behavior of the proposed VSI charts, average number of switches(ANSW) are also investigated.

• 한국위성정보통신학회논문지
• /
• 제8권4호
• /
• pp.130-134
• /
• 2013

본 논문에서는 3D 방송의 기본적인 원리를 설명하고 3D 방송을 CS 기술을 적용하여 데이터 용량을 줄이는 방식을 제안한다. 샘플링 이론과 CS 기술의 차이점을 설명하고 개념과 동작원리를 설명한다. 최근 제안된 CS 센싱의 복원 알고리즘인 AMP(Approximate Message Passing)와 CoSaMP(Compressive Sampling Matched Pursuit)를 소개하고 이를 이용하여 이미지 데이터를 압축 복원하여 비교한다. 두 알고리즘의 계산시간을 비교하여 낮은 복잡도를 갖는 알고리즘을 판단한다.

• International Journal of Control, Automation, and Systems
• /
• 제5권5호
• /
• pp.515-525
• /
• 2007

In this paper, we develop a co-design methodology of stochastic optimal controllers and network parameters that optimizes the overall quality of control (QoC) in networked control systems (NCSs). A new dynamic model for NCSs is provided. The relationship between the system stability and performance and the sampling frequency is investigated, and the analysis of co-design of control and network parameters is presented to determine the working range of the sampling frequency in an NCS. This optimal sampling frequency range is derived based on the system dynamics and the network characteristics such as data rate, time-delay upper bound, data-packet size, and device processing time. With the optimal sampling frequency, stochastic optimal controllers are designed to improve the overall QoC in an NCS. This co-design methodology is a useful rule of thumb to choose the network and control parameters for NCS implementation. The feasibility and effectiveness of this co-design methodology is verified experimentally by our NCS test bed, a ball magnetic-levitation (maglev) system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.579-582
• /
• 1999

This paper presents a design method of deadbeat controller for DC motor driving a rotational system with gear. The results of sampling a continuous-data process does not guarantee that no ripples occur between the sampling instants in the continuous-data output, but the proposed deadbeat control system that consists of the integral controller and the full state observer, and zero order hold using in continuous systems, has many advantages of such as an output response without the ripple and reaching the steady state without error after a given sampling period and faster settling time than the optimal control system in the short sampling period. The results of case study through matlab simulation shown that the efficiency of the proposed controller for DC motor driving a rotational system with gear, is verified by comparing with optimal controller etc.

• Journal of the Korean Data and Information Science Society
• /
• 제15권1호
• /
• pp.227-237
• /
• 2004

In this paper we presented a Bayesian inference approach for estimating the location and scale parameters of the lognormal distribution using iterative Gibbs sampling algorithm. We also presented estimation of location parameter by two non iterative methods, importance sampling and weighted bootstrap assuming scale parameter as known. The estimates by non iterative techniques do not depend on the specification of hyper parameters which is optimal from the Bayesian point of view. The estimates obtained by more sophisticated Gibbs sampler vary slightly with the choices of hyper parameters. The objective of this paper is to illustrate these tools in a simpler setup which may be essential in more complicated situations.

• Journal of the Korean Data and Information Science Society
• /
• 제23권4호
• /
• pp.859-866
• /
• 2012

Some switching properties of multivariate control charts are investigated when the interval between two consecutive sample selections is not fixed but changes according to the result of the previous sample observation. Many articles showed that the performances of variable sampling interval control charts are more efficient than those of fixed sampling interval control charts in terms of average run length (ARL) and average time to signal (ATS). Unfortunately, the ARL and the ATS do not provide any information on how frequent a switch is being made. We evaluate several switching properties of two sampling interval Shewhart and CUSUM procedures for controlling mean vector of correlated quality variables.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.325-329
• /
• 2011

This paper introduces the 10b 1MS/s SAR ADC with double sampling technique to reduce the power consumption. The SAR ADC is implemented in CMOS 1P8M 65nm technology and occupies 0.11um2. The maximum sampling rate is 1MS/s. The simulated SNDR and SFDR are 55.6dB and 62.7dB at 484kHz input frequency, respectively. The implemented data converter consumes 507uW with 1.2-V supply.

• 응용통계연구
• /
• 제14권1호
• /
• pp.111-120
• /
• 2001

하나의 업종에 대한 경영실태조사에서 모집단을 구성하는 기업체들의 규모가 큰 차이가 없다고 판단되면 계통추출법이나 층화확률추출법을 주로 적용할 수 있으나 일부기업체의 합계가 모총계의 상당히 큰 부분을 차지하는 경우에는 절사계통추출법이 효율적이다. 본고에서는 위 세 가지 추출법에 의한 모총계 추정량과 모총계 추정량의 분산의 추정법을 살펴보고, 세 가지 추출법을 비교하여 절사계통추출법의 효율성을 실제 자료인 벌목업 경영실태 조사자료를 통해서 입증하였다.

• 생태와환경
• /
• 제54권3호
• /
• pp.221-228
• /
• 2021

Recently, environmental DNA (eDNA)-based metabarcoding approaches have been proposed to evaluate the status of freshwater ecosystems owing to various advantages, including fast and easy sampling and minimal habitat disruption from sampling. Therefore, as a case study, we applied eDNA metabarcoding techniques to evaluate the effects of an abandoned mine land located near a headwater stream of Nakdonggang River, South Korea, by examining benthic macroinvertebrate diversity and compared the results with those obtained using the traditional Surber-net sampling method. The number of genera was higher in Surber-net sampling (29) than in the eDNA analysis (20). The genus richness tended to decrease from headwater to downstream in eDNA analysis, whereas richness tended to decrease at sites with acid-sulfated sediment areas using Surber-net sampling. Through cluster analysis and non-metric multidimensional scaling, the sampling sites were differentiated into two parts: acid-sulfated and other sites using Surber-net sampling, whereas they were grouped into the two lowest downstream and other sites using eDNA sampling. To evaluate freshwater ecosystems using eDNA analysis in practical applications, it is necessary to constantly upgrade the methodologies and compare the data with field survey methods.