• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.249-252
• /
• 2002

we have studied the characteristics of PHEMT's with gate recess etching method. The DC characterization of PHTMT fabricated with the wide single recess methods is a maximum drain current density of 319.4 ㎃/mm and a peak transconductance of 336.7 ㎳/mm. The RF measurements were obtained in the frequency range of 1~50GHz. At 50GHz, 3.69dB of 521 gain were obtained and a current gain cut-off frequency(f$_{T}$) of 113 CH and a maximum frequency of oscillation(f$_{max}$) of 172 Ghz were achieved from this device. On the other hand, a maximum drain current of 367 mA/mm, a peak transconduclancc of 504.6 mS/mm, S$_{21}$ gain of 2.94 dB, a current gain cut-off frequency(f$_{T}$) of 101 CH and a maximum frequency of oscillation(f$_{max}$) of 113 fa were achieved from the PHEMT's fabricated by the .narrow single recess methods.methods.

• 센서학회지
• /
• 제29권5호
• /
• pp.324-327
• /
• 2020

The impact of output conductance (g_o) on the short-circuit current-gain cut-off frequency (f_T) in In_0.8Ga_0.2As high-electron-mobility transistors (HEMTs) on an InP substrate was investigated. An attempted was made to extract the values of f_T in a simplified small-signal model (SSM) of the HEMTs, derive an analytical formula for f_T in terms of the extrinsic model parameters of the simplified SSM, which are related to the intrinsic model parameters of a general SSM, and verify its validity for devices with L_g from 260 to 25 nm. In long-channel devices, the effect of the intrinsic output conductance (g_oi) on f_T was negligible. This was because, from the simplified SSM perspective, three model parameters, such as g_{m_ext}, C_{gs_ext} and C_{gd_ext}, were weakly dependent on g_oi. However, in short-channel devices, g_oi was found to play a significant role in degrading f_T as L_g was scaled down. The increase in g_oi in short-channel devices caused a considerable reduction in g_{m_ext} and an overall increase in the total extrinsic gate capacitance, yielding a decrease in f_T with g_oi. Finally, the results were used to infer how f_T is influenced by g_oi in HEMTs, emphasizing that improving electrostatic integrity is also critical importance to benefit fully from scaling down L_g.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.312-317
• /
• 2015

In this paper, the RF characteristics of multi-finger MOSFETs were improved by decreasing the parasitic capacitance in spite of increased gate resistance in a 90-nm CMOS technology. Two types of device structures were designed to compare the parasitic capacitance in the gate-to-source ($C_{gs}$) and gate-to-drain ($C_{gd}$) configurations. The radio frequency (RF) performance of multi-finger MOSFETs, such as cut-off frequency ($f_T$) and maximum-oscillation frequency ($f_{max}$) improved by approximately 10% by reducing the parasitic capacitance about 8.2% while maintaining the DC performance.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.127-133
• /
• 2013

We examined the scaling effects of a number of gate_fingers (N) and gate_widths (w) on the high-frequency characteristics of $0.1-{\mu}m$ metamorphic high-electron-mobility transistors. Functional relationships of the extracted small-signal parameters with total gate widths ($w_t$) of different N were proposed. The cut-off frequency ($f_T$) showed an almost independent relationship with $w_t$; however, the maximum frequency of oscillation ($f_{max}$) exhibited a strong functional relationship of gate-resistance ($R_g$) influenced by both N and $w_t$. A greater $w_t$ produced a higher $f_{max}$; but, to maximize $f_{max}$ at a given $w_t$, to increase N was more efficient than to increase the single gate_width.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.550-553
• /
• 2001

In this study, unity current gain frequency f$\_$T/ of GaAs MESFET is predicted with different temperatures up to 400 $^{\circ}C$. Temperature dependence parameters of the device including intrinsic carrier concentration n$\_$i/ effective mass, depletion width are considered to be temperature dependent. Small signal parameters such as gate-source, gate dran capacitances C$\_$gs/ C$\_$gd/ are correlated with transconductance g$\_$m/ to predict the unity current gain frequency. The extrinsic capacitance which plays an important roles in high frequency region has been taken into consideration in evaluating total capacitance by using elliptic integral through the substrate. From the results, f$\_$T/ decreases as the temperature increases due to the increase of small signal capacitances and the mobility degradation. Finally the extrinsic elements of capacitances have been proved to be critical in deciding f$\_$T/ which are originated from the design rule of the device.

• Journal of Information Display
• /
• 제12권2호
• /
• pp.109-113
• /
• 2011

This paper summarizes the recent fabrication and characterizations of flexible high-speed radio frequency (RF) transistors, PIN-diode single-pole single-throw switches, as well as flexible inductors and capacitors, based on single-crystalline Si nanomembranes transferred on polyethylene terephthalate substrates. Flexible thin-film transistors (TFTs) on plastic substrates have reached RF operation speed with a record cut-off/maximum oscillation frequency ($f_T/f_{max}$) values of 3.8/12 GHz. PIN diode switches exhibit excellent ON/OFF behaviors at high RF frequencies. Flexible inductors and capacitors compatible with high-speed TFT fabrication show resonance frequencies ($f_{res}$) up to 9.1 and 13.5 GHz, respectively. Robust mechanical characteristics were also demonstrated with these high-frequency passives components.

• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.116-120
• /
• 2012

본 논문에서는 밀리미터파 응용에 사용 가능한 우수한 성능의 50 nm InGaAs/InAlAs/GaAs metamorphic HEMT를 구현하였다. 게이트 길이가 50 nm이며 단위 게이트 폭이 30 ${\mu}m$인 2개의 게이트를 가지고 있는 MHEMT의 측정결과, 740 mA/mm의 드레인 포화 전류밀도와 1.02 S/mm의 상호전달 전도도를 얻었으며 전류이득차단주파수와 최대공진주파수는 각각 430 GHz와 406 GHz의 특성을 나타내었다.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.637-641
• /
• 2006

본 논문에서는 100 nm 게이트 길이를 갖는 InGaAs/InAlAs/GaAs MHEMT(metamorphic high electron mobility transistors)m의 DC와 RF 특성을 분석 하였다. 이중 노광 방법으로 ZEP520/P(MMA-MAA)/PMMA 3층 구조의 레지스터와 게이트 길이 100 nm인 게이트를 제작하였다. 게이트의 단위 폭이 $70\;{\mu}m$인 2개의 게이트와 길이가 100 nm로 제작된 MHEMT를 DC 및 RF특성을 조사하였다. 최대 드레인 전류 밀도는 465 mA/mm, 상호전달 컨덕턴스는 844 mS/mm이, RF 측정으로부터 전류 이득 차단 주파수는 192 GHz와 최대 진동주파수 310 GHz인 특성을 보였다.

• 대한전자공학회논문지SD
• /
• 제47권10호
• /
• pp.14-22
• /
• 2010

기존의 n-type metal-oxide-semiconductor field effect transistor(NMOSFET)은 $n^+/p^{(+)}/n^+$ type의 이온 주입을 통하여 소스/채널/드레인 영역을 형성하게 된다. 30 nm 이하의 채널 길이를 갖는 초미세 소자를 제작함에 있어서 설계한 유효 채널 길이를 정확하게 얻기 위해서는 주입된 이온들을 완전히 activation하여 전류 수준을 향상시키면서도 diffusion을 최소화하기 위해 낮은 thermal budget을 갖도록 공정을 설계해야 한다. 실제 공정에서의 process margin을 완화할 수 있도록 오히려 p-type 채널을 형성하져 않으면서도 기존의 NMOSFET의 동작을 온전히 구현할 수 있는 junctionless(JL) MOSFET이 연구중이다. 본 논문에서는 3차원 소자 시뮬레이션을 통하여 silicon nanowire(SNW) 구조에 접목시킨 JL MOSFET을 최적 설계하고 그러한 조건의 소자에 대하여 conductance, maximum oscillation frequency($f_{max}$), current gain cut-off frequency($f_T$) 등의 기본적인 고주파 특성을 분석한다. 채널 길이는 30 nm이며 설계 변수는 채널 도핑 농도와 채널 SNW의 반지름이다. 최적 설계된 JL SNW NMOSFET에 대하여 동작 조건($V_{GS}$ = $V_{DS}$ = 1.0 V)에서 각각 367.5 GHz, 602.5 GHz의 $f_T$, $f_{max}$를 얻을 수 있었다.

• ETRI Journal
• /
• 제37권5호
• /
• pp.945-950
• /
• 2015

A novel microstrip low-pass filter is presented to achieve an ultra-wide stopband with 11 harmonic suppression and very sharp skirt characteristics. The filter is composed of a modified U-shaped resonator (which creates two fully adjustable transmission zeroes), a T-shaped resonator (which determines a cut-off frequency), and four radial stubs (which provide a wider stopband). The operating mechanism of the filter is investigated based on a proposed equivalent-circuit model, and the role of each section of the proposed filter in creating null points is theoretically discussed in detail. The presented filter with 3 dB cut-off frequency ($f_c=2.35GHz$) has been fabricated and measured. Results show that a relative stopband bandwidth of 164% (referred to as a 22 dB suppression) is obtained while achieving a high figure-of-merit of 15,221.