• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.258-258
• /
• 2006

Electrospun fibers of poly(vinyl alcohol) (PVA) were successfully prepared and applied as drug carriers for transdermal drug delivery system. Sodium Salicylate (SS) was the model drug and it was incorporated in the PVA fibers by adding 20 % of SS in a PVA solution prior to electrospinning. Electrospinning of SS-containing PVA solution resulted in the formation of beaded fibers. In order to control the rate of SS release and decrease water solubility of PVA, the SS-loaded electrospun PVA mat was cross-linked by either glutaraldehyde or glyoxal vapor. The morphology, thermal behavior, swelling behavior, release characteristic, kinetics of drug release and also toxicity of the cross-linked sample were investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.388.1-388.1
• /
• 2014

The performance of PVA(polyvinyl alchol) is better than another organic dielectric material. Therefore, PVA has been researched for organic and in-organic dielectric material. But research of changing PVA's dielectric constant and leakage current by increasing temperature and concentration was insigificant. We try to find pure PVA and cross-linked PVA's characteristic of dielectric by changing temperature and concentration. 5/10/15wt% PVA concentration (5% interval) was in progress, PVA at $100/150/200/250^{\circ}C$ ($50^{\circ}C$ interval) of experiments was conducted in relation to temperature. The higher the concentration, leakage currents decrease, and dielectric constant is increased. With regard to temperature, we could not see a big change of leakage current and dielectric constant of pure PVA until $200^{\circ}C$. However, we could see a tendency to increase significantly at $250^{\circ}C$. Also, leakage current and dielectric constant of cross-linked PVA gradually increased from at $100^{\circ}C$ to $200^{\circ}C$ and then sharply increased from at $250^{\circ}C$. We tried to find that PVA's inner bonds(hydroxyl group (OH-) lead to the results.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.1-5
• /
• 2010

The PVA (poly-vinyl alcohol) insulators were spun coated onto ITO coated glass substrates with the capacitors of Glass/ITO/PVA/Al structure. The effects of PVA concentrations (3.0, 4.0 and 5.0 wt%) on the morphology and electrical properties of the films were investigated. As the concentration of PVA increased from 3.0 to 5.0 wt%, the leakage current of device decreased from 17.1 to 0.23 pA. From the AFM measurement, the RMS value decreased with increasing PVA concentration, showing the improvement of insulator film roughness. The capacitances of the films with PVA concentrations of 4.0 and 5.0 wt% were about 28.1 and 24.2 nF, respectively. The lowest leakage current of 1.77 PA was obtained at the film thickness of 117.5 nm for the device with fixed PVA concentration of 5.0 wt%.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.189-193
• /
• 2008

Thermal cross-linking method of poly(vinyl alcohol) (PVA) using poly(acrylic acid) (PAA) was carried out on PVA/PAA hydrogels. The level of gelation was measured in the PVA/PAA hydrogels with various PAA contents. The swelling behavior at various pHs showed that the swelling kinetics and water contents of the PVA/PAA hydrogels reached equilibrium after 30 h, and the time to reach the equilibrium state decreased with increasing PAA content in the hydrogel. The water content increased with increasing pH of the buffer solution. The permeation and release of the drug were tested using indomethacin as a model drug. The permeated and released amounts of the drug increased with decreasing the PAA content because of the low free volume in the hydrogel due to the higher cross-linking density. The kinetic profile of drug release at various pHs showed that all samples reached the equilibrium state within the 5 h.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.445-448
• /
• 2006

Bias stress effect in pentacene organic thin-flim transistors with cross-linked PVA gate dielectric is analyzed. For negative gate bias stress, positive threshold voltage shift is observed. The injected charges from the gate electrode to the defect states of gate dielectric are regarded as the main origin of $V_T$ shift. The reduced bias stress effect using $SiO_2$ blocking layer confirms the assumed mechanism. It is also demonstrated that the inverter with $SiO_2$ blocking layer shows the negligible hysteresis owing to the reduced bias stress effect.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.125-130
• /
• 1992

A resistive-type humidity sensors have been fabricated using cross-linked PMMA thin film as sensing material and their humidity characteristics have been investigated. The sensor coated of the cross-linked PMMA with PVA exhibited largely variation of resistance by increase of relative humidity and less than 3% of hysteresis. Furthermore, the fabricated sensor exhibited superior long-term stability. The response time of the PMMA humidity sensor was about 7 min. for adsorption and about 5 min. for desorption respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.110-111
• /
• 2019

Concrete with high thixotropy has a lower plastic viscosity when pour in, thus demonstrating fluidity, and After poured, the viscosity can be restored again to ensure stable progress without additional liquidity and material separation. Therefore, in this study, a basic study of thixotropy of concrete was proceeded through cross-linked bond of PVA and Borax. Therefore, it is judgment that the higher the concentration of boron solutions, the higher the strength of the interconnections between PVA and boron.

• Journal of Information Display
• /
• v.6 no.2
• /
• pp.16-18
• /
• 2005

Hybrid insulator pentacene thin film transistors (TFTs) are fabricated with thermally grown oxide and cross-linked polyvinylalcohol (PVA) including surface treatment by dilute ploymethylmethacrylate (PMMA) layer on $n^+$ doped silicon wafer. Through the optimization of $SiO_2$ layer thickness in hybrid insulator structure, carrier mobility is increased to more than 35 times than that of the TFT which has only a gate insulator of $SiO_2$ at the same electric field. The carrier mobility of $1.80cm^2$/V-s, subthreshold swing of 1.81 V/decade, and $I_{on}/I_{off}$ current ratio> $1.10{\times}10^5$ are obtained less than -30 V bias condition. The result is one of the best reported performances of pentacene TFTs with hybrid insulator including cross-linked PVA layer as a gate insulator at relatively low voltage operation.

• Membrane Journal
• /
• v.10 no.3
• /
• pp.148-154
• /
• 2000

Poly(vinyl alcohol)(PVA)/sulfur-siccinic acid(SSA) membrane performances have been studied for the vapor permeation separation of methyl tort-butyl ether(MTBE)/methanol mixtures with varying operation temperatures, amount of cross-linking agents, and feed compositions. 1'here are two factors, the membrane network and the hydrogen bonding, in the swelling measurements of PVA/SSA membranes. These two factors act interdependently on the membrane swelling. The sulfuric acid group in SSA took an important role in the membrane performance. The cross-linking effect might be more dominant than the hydrogen bonding effect due to the sulfuric acid group at 7% SSA membrane. Hydrogen bonding effect was more important for 5% SSA membrane. In vapor permeation, density or concentration of methanol in vapor feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membrane shows the highest separation factor of 2187 with the flux of 4.84g/$m^2$hr for MTBE/methanol=80/20 mixtures at 3$0^{\circ}C$.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.279-285
• /
• 2018

The pervaporation separation of isopropanol/water mixture was carried out on a series of chemically cross-linked poly(vinyl alcohol)(PVA) composite membranes. The membranes were prepared by casting three kinds of PVA solutions with varying concentrations of PVA and GA onto polyacrylonitrile (PAN) support followed by thermal cross linking. As the PVA concentration increased, the flux decreased but separation factor was increased. It was confirmed that the composite membrane coated with PVA-3 (98~99% hydrolyzed) at a concentration of 7 wt% PVA and 20 wt% glutaraldehyde (GA) exhibited a flux of $209g/m^2h$ and a separation factor of more than 100. The submerged module test was carried out with controlled feed tank temperature and IPA concentration of the feed solution. The continuous concentration of IPA solution was increased from 90% to 99% after 60 h.